Directed Directechs DB3 Bedienungsanleitung

DB3 403.HK3

v3.04

2016 Hyundai Santa Fe Sport

Introduction 3

Vehicle function compatibilities 4

Pre-installation and application warnings 5

Wiring diagram 6

Locating components in the vehicle 7

Vehicle connections 8

Module programming 10

Connecting the module 11

LED diagnostics and troubleshooting 12

Soft reset 14

Hard reset 14

Feature programming 15

Feature and option list 16

Limited one year consumer warranty 17

Quick reference guide 18

Contents

3403.HK3 3.04 2016 Hyundai Santa Fe Sport

Introduction

DB3 is an all-in-one door lock and override module.

Warning!

This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs

Mobile application for smartphones. Refer to “Connecting the module” for more information.

4403.HK3 3.04 2016 Hyundai Santa Fe Sport

Vehicle function compatibilities

This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.

Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart.

Panic Mode Activation

Arm Factory Security

Disarm Factory Security

Door Lock Control

Door Unlock

Driver Priority Unlock

Trunk / Hatch Release

Control of aftermarket alarm with OEM remote

Immobilizer Bypass-Data No Key Req'd

RAP Shut Down (Retained ACC Power)

Remote Start Takeover

SmartStart

Tach / RPM Output

Entry Monitoring ALL Door Pins

Entry Monitoring Hood Pin

Entry Monitoring Trunk/Hatch Pin

Factory Alarm Trigger Monitoring

Brake Status (foot brake)

Door Locks Status

E-Brake Status

Ignition Status

5403.HK3 3.04 2016 Hyundai Santa Fe Sport

Pre-installation and application warnings

START HERE This section highlights important information for this speciﬁc ﬁrmware and will assist in pricing accordingly, as

well as bringing awareness to any operational or vehicle limitations.

Compatibilities and Requirements

T-Harness

compatible T-Harness is not compatible. Keys required for

programming 1Keys required

for operation 0

Vehicle Takeover Refer to the Quick Reference Guide section for more details.

Firmware notes

Unless speciﬁed otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.

Refer to the Vehicle connections section following the installation diagram.

Footnotes

[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin or if

not supported in data.

[2] Tach wire: Optional connection required on some remote starters, which do not support a tach signal in D2D

[3] EMS COM: This connection is not required in US vehicles without transponder.

[4] Immobilizer Interrupt: Vehicles with a transponder will require the immobilizer Orange/Black and Yellow/Black connections.

However, for some vehicles, the immobilizer interrupt may not be required. If this is the case, the vehicle will crank but not remote

start. Therefore, you must permanently reconnect the interrupt, leaving the Orange/Black and Yellow/Black connections, and retry

the remote starter.

6403.HK3 3.04 2016 Hyundai Santa Fe Sport

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

D2D Port

OBDII

Diagnostic

Connector

(+) Ignition Output

(-) Parking Lights Output

(+) Accessory Output

(+) Starter Output

(+) 12V Input

HS CAN 1 High: Tan/Black: 3

HS CAN 1 Low: Tan : 4

HS CAN 2 High: Orange/Green: 5

HS CAN 2 Low: Orange/Brown: 6

Immo. Data (vehicle side): Orange/Black: 11

1412

10 42

(+) 12V

(-) Ground

(-) Ground (-) Ground

1 8

169

Wiring diagram

XKD2D65

(AC) Tach Output: Violet/White: 5

Immo. Data (vehicle side): Yellow/Black: 10

Immo. Data Interr. (conn. side): Yellow: 8

Immo. Data Interr. (veh. side): Orange/Yellow: 9

Ignition Switch

(black conn. at key switch)

(+) Accessory: Blue, pin 2

(+) Ignition 1: Green, pin 4

(+) Starter: Black, pin 3

B-CAN High: Blue, pin 24

B-CAN Low: Red, pin 33

C-CAN Low: Orange, pin 14

C-CAN High: Green, pin 6

Junction Connector

(white conn. driver kick panel)

(-) Parking Lights: Pink, pin 15

Parking Light

(white conn. at

headlight switch)

EMS COM: Blue, pin 32

Junction Connector

(black conn. driver kick panel)

(+) 12V: Red, pin 1

CUT

If the vehicle cranks

but does not start,

reverse these two

connections.

Hood Pin

(-) Hood Pin Input

(AC) Tach Input

7403.HK3 3.04 2016 Hyundai Santa Fe Sport

Locating components in the vehicle

White

48-pin

White

1-pin

Black

46-pin

Blue

31-pin

Joint

Connector

Green 30-pin

Driver Kick Panel

8403.HK3 3.04 2016 Hyundai Santa Fe Sport

Vehicle connections

The connection information listed below is specific to the 2016 Hyundai Santa Fe Sport. Refer to “Pre-installation and application warnings” for a list of important notes.

Data 14-pin blue connector (H1)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H1/1 Light Green No Connection No Connection

H1/2 Violet/Yellow No Connection No Connection

H1/3 Tan/Black (DATA) HS CAN 1 High OBD-Data Link Connector, black 16 pin plug, pin 6 Data Green (C-CAN)

H1/4 Tan (DATA) HS CAN 1 Low OBD-Data Link Connector, black 16 pin plug, pin 14 Data Orange (C-CAN)

H1/5 Orange/Green (DATA) HS CAN 2 High Driver Kick, white 48 pin plug (MF11), pin 24 Data Blue (B-CAN)

H1/6 Orange/Brown (DATA) HS CAN 2 Low Driver Kick, white 48 pin plug (MF11), pin 33 Data Red (B-CAN)

H1/7 Brown Relay N.O. No Connection No Connection

H1/8 Yellow Relay COM No Connection No Connection

H1/9 Orange/Yellow Relay N.C. No Connection No Connection

H1/10 Orange/Red Relay N.C. No Connection No Connection

H1/11 Yellow/Red Relay COM No Connection No Connection

H1/12 Brown/Red Relay N.O. No Connection No Connection

H1/13 Red (+) W2W Only - 12 Volt Ignition Switch, black 6 pin plug, pin 1 + Red (40A)

H1/14 Black (-) W2W Only - Ground (chassis ground)

Output 12-pin red connector (H2)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H2/1 Black/White (-) W2W Only - E-Brake Input Remote Starter

H2/2 Green/Black No Connection No Connection

H2/3 Green/White (-) W2W Only - Door Output Remote Starter

H2/4 Red/Black (-) W2W Only - Trunk Output Remote Starter

H2/5 Violet/White (AC) W2W Only - Tach Output [1] Remote Starter

H2/6 Gray (+) W2W Only - Brake Output Remote Starter

H2/7 Gray/Black No Connection No Connection

H2/8 Violet/Green No Connection No Connection

H2/9 Violet/Brown No Connection No Connection

H2/10 Yellow/Black No Connection No Connection

H2/11 Orange/Black (Data) Immo Data [2] Driver Kick, black 46 pin plug (EM11), pin 32 Data Blue (EMS COM)

H2/12 Blue/Red (-) W2W Only - Hood Output Remote Starter

Input 10-pin black connector (H3)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

9403.HK3 3.04 2016 Hyundai Santa Fe Sport

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H3/1 Green (-) W2W Only - Lock Input Remote Starter

H3/2 Blue (-) W2W Only - Unlock Input Remote Starter

H3/3 Red/White (-) W2W Only - Trunk Input Remote Starter

H3/4 White/Violet No Connection No Connection

H3/5 Violet/Black No Connection No Connection

H3/6 White/Black No Connection No Connection

H3/7 Pink/White No Connection No Connection

H3/8 Violet No Connection No Connection

H3/9 Pink (+) W2W Only - Ignition Input Remote Starter

H3/10 Blue/White (-) W2W Only - Ground When Running (Status) Input Remote Starter

D2D 4-pin white connector (H4)

Module

Conn./Pin Color Description

H4/1 Green (Data) TX

H4/2 Black (-) Ground

H4/3 Blue (Data) RX

H4/4 Red (+) 12 Volt

RF 2-pin white connector (H5)

Module

Conn./Pin Color Description

H5/1 N/A No Connection

H5/2 N/A No Connection

Additional remote start connections

(Not all of these connections may be required for your installation. Refer to the wiring diagram for vehicle-specific connections.)

Wire Connects To

Wire Location (+/-) Wire Color

12 Volts Ignition Switch, black 6 pin plug, pin 1 + Red (40A)

Accessory Ignition Switch, black 6 pin plug, pin 2 + Blue

Ground (chassis ground)

Ignition Ignition Switch, black 6 pin plug, pin 4 + Green

Parking Lights - Headlight Switch, white 16 pin plug, pin 15 - Pink

Starter Ignition Switch, black 6 pin plug, pin 3 + Black

Tachometer [1] Camshaft Position Sensor on engine driver side, gray 3 pin plug, pin

AC Brown/Orange (2.0L, 2.4L)

10 403.HK3 3.04 2016 Hyundai Santa Fe Sport

Module programming

Refer to “LED diagnostics and troubleshooting” for more information and for troubleshooting purposes.

1Wait until the LED turns ON solid red.

2Insert and turn the key to the ON position. The LED starts flashing green, then turns ON solid

green for 3 seconds, before shutting OFF.

If the vehicle does not have a transponder, the LED will remain ON solid red.

Press the programming button 5 times to skip the transponder programming. The LED turns

ON solid orange for 3 seconds, then shuts off when the programming is done.

4Turn the key to OFF, and remove it from the ignition barrel.

You have successfully completed the module programming sequence.

Andere Handbücher für Directechs DB3

Inhaltsverzeichnis

Andere Directed Autozubehör Handbücher

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed 403.SUBARU11 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DS3 Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed DIRECTECHS HYUNDAI11 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed XpressKit DBALL Bedienungsanleitung

Directed

Directed Directechs MIT6 Bedienungsanleitung

Directed

Directed VW10 Bedienungsanleitung

Directed

Directed 933.TL16 Bedienungsanleitung

Directed

Directed 403.VW10 Bedienungsanleitung

Directed

Directed 403.NISS4HT 2.39 RSR Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed Directechs DS3 Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed 535T Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung