DirecTV HR10-250 Bedienungsanleitung

Quick Start Guide

Network Your

DIRECTV Plus®

HD DVR

Network Your DIRECTV Plus HD DVR QUICK-START GUIDE

Your DIRECTV Plus HD DVR is network-capable, meaning it can connect to your home network and the internet.

And, with the proper equipment (as outlined below), your DIRECTV Plus HD DVR can access Media Share, the

exciting new service that allows you to stream pictures and music from your home computer!

Intel Viiv™ Processor Technology-based PC

(look for the Intel Viiv™ sticker on the computer).

Before You Begin Requirements:

Router (Intel Viiv™ Technology - compliant router

preferred. Look for the "Enjoy with Viiv" sticker on

the router).

Broadband internet connection

The latest version of the Intel Viiv™ Media Share

Software

- Windows XP systems require Version 1.5 or higher

- Windows Vista systems require Version 1.6 or higher

If you don't have this software, go to

www.directv.com/mediashare to download it.

This Quick-Start Guide will show you how to connect your DIRECTV Plus HD DVR to your home network and use

Intel Viiv™ Processor Technology-based PC to use Media Share. Installation is quick and easy, just follow the

steps!

There are three (3) ways to connect your DIRECTV Plus HD DVR to your home network:

1. Wired Connection

2. Powerline Connection

3. Wireless Connection

CONNECT YOUR DIRECTV Plus HD DVR TO YOUR HOME NETWORK

Wired Connection

Powerline Connection

Wirelless Connection

™

USE MEDIA SHARE

SET UP YOUR IntelViiv™MEDIA SERVER

Connect Your DIRECTV Plus HD DVR To Your Home Network

WIRED CONNECTION

A wired connection is a direct or indirect connection between your DSL/cable router and your DIRECTV Plus HD DVR via an

Ethernet cable. Note that your equipment may look different.

Router

Ethernet Cable

HD DVR

Direct Connection

Indirect Connection

HD DVR

Ethernet Cable

If you can access your router, make sure that that it is providing Broadband to the Ethernet jack

that you are connecting your HD DVR to.

Step 1

Plug one end of the Ethernet cable into the Ethernet port located on the back of your HD DVR.

(Note: You may have one or two Ethernet ports, depending on your model. If you have 2, use the

TOP Ethernet port.)

Ethernet cable

plugs into HD DVR.

Step 2

Step 3

Go to your DIRECTV Plus HD DVR:

Press Menu On Your DIRECTV Remote>

Select Help & Settings>

Select Setup>

Select Network>

Choose Connect Now

If your HD DVR immediately recognizes the network connection

you will receive this Congratulations screen.

(See Figure A.)

Verify that You are Connected!

Figure A

Figure B

If your HD DVR does not immediately recognize the network

connection, you will get the option to choose your

Connection method. You should choose Wired.

(See Figure B.)

Network Your DIRECTV Plus HD DVR - QUICK START GUIDE

Ethernet cable

connects to an unused

port on the router.

Along with the requirements listed on page 2, you will need:

Cat5 Wiring in your home.

This means that you have Broadband ready Ethernet jacks that

you can plug into in different areas of your home

Connect the other end of the Ethernet cable into an Ethernet Adapter device

(Wall Mount or Power Strip), and plug the Ethernet Adapter device into a wall outlet.

Connect Your DIRECTV Plus HD DVR To Your Home Network

POWERLINE CONNECTION

Ethernet cable

connects to an unused

port on the router.

A powerline connection uses your home’s existing power lines to connect your DSL/cable router to your DIRECTV Plus HD

DVR via an Ethernet Adapter that uses HomePlug(R) or a similar power line technology.

Two Ethernet Adapters are needed: one to connect to the router and one to connect to the DIRECTV Plus HD DVR.

Along with the requirements listed on page 2, you will need:

Note: If you live in an apartment or condo, you may have to adjust the security settings on your Ethernet Adapter to

ensure that your neighbors with similar adapters do not intercept your data. Refer to the manufacturer’s instructions for your

Ethernet Adapter.

2 Ethernet Adapter Devices

IMPORTANT: Please be advised that your Ethernet Adapters must be plugged directly into a wall. However, if you have power

strip that is certified to work with your Ethernet Adapter, you may use it. If you do not have a certified power strip,

you must plug your Ethernet Adapter directly into an electrical outlet.

Step 1

Connect one end of an Ethernet cable to an unused port on the back of your router.

Step 2

Router

Ethernet

Cable

Ethernet Adapter

Connect the other end of the Ethernet cable to the Ethernet jack on the Ethernet Adapter. If your Ethernet Adapter is combined

with your power strip, then plug your power strip into the wall and connect the Ethernet cable to the jack on the power strip.

Power Strip Configuration

Step 3

At the back of the DIRECTV Plus HD DVR, connect another Ethernet cable into the back

of your DIRECTV Plus HD DVR.

Ethernet cable

plugs into HD DVR.

Network Your DIRECTV Plus HD DVR - QUICK START GUIDE

2 Ethernet Cables

Wall Mount Plugged

into Wall Outlet

(Note: You may have one or two Ethernet ports, depending on your model. If you have 2, use the

TOP Ethernet port.)

Connect Your DIRECTV Plus HD DVR To Your Home Network

POWERLINE CONNECTION

Ethernet

Cable

Ethernet

Adapter

Wall Mount

Plugged into

Wall Outlet

HD DVR

Connect the other end of the Ethernet cable to the other Ethernet Adapter.

Step 4

Wall Mount Configuration

Network Your DIRECTV Plus HD DVR - QUICK START GUIDE

Step 5

Go to your DIRECTV Plus HD DVR:

Press Menu On Your DIRECTV Remote>

Select Help & Settings>

Select Setup>

Select Network>

Choose Connect Now

If your HD DVR immediately recognizes the network connection

you will receive this Congratulations screen.

(See Figure A.)

Verify that You are Connected!

Figure A

Figure B

If your HD DVR does not immediately recognize the network

connection, you will get the option to choose your

Connection method. You should choose Powerline.

(See Figure B.)

Connect Your DIRECTV Plus HD DVR To Your Home Network

WIRELESS CONNECTION

Step 1

Ethernet cable

plugs into HD DVR.

Step 2

Step 3

Go to your DIRECTV Plus HD DVR:

Press Menu On Your DIRECTV Remote>

Select Help & Settings>

Select Setup>

Select Network>

Choose Connect Now

If your HD DVR immediately recognizes the network connection

you will receive this Congratulations screen.

(See Figure A.)

Verify that You are Connected!

Figure A

Figure B

If your HD DVR does not immediately recognize the network

connection, you will get the option to choose your

Connection method. You should choose Wireless.

(See Figure B.)

A Wireless Transceiver that uses an Ethernet Port to

connect to a media device.

Wireless

Ethernet Cable

HD DVR

A wireless connection uses your own wireless router and a wireless transceiver to send data from your DSL/cable router to the

DIRECTV Plus HD DVR. Please be advised that DIRECTV does not recommend using a wireless device, because it may not

provide the best experience. For the best digital entertainment experience, the better options are Wired and

Powerline. However if you prefer to use Wireless, you must follow the manufacturer's directions on configuring your Wireless

device. These instructions will help you to make the right connections to your DIRECTV Plus HD DVR.

connects to the LAN port

of the wireless transceiver.

Connect one end of an Ethernet cable to the LAN port on the back of the wireless transceiver.

Connect the other end of the Ethernet cable to the DIRECTV Plus HD DVR jack

labeled ETHERNET.

Ethernet cable

Network Your DIRECTV Plus HD DVR - QUICK START GUIDE

Along with the requirements listed on page 2, you will need:

A Wireless Router (in place of a regular router).

(Note: You may have one or two Ethernet ports, depending on your model.

If you have 2, use the TOP Ethernet port.)

Transceiver

Set Up Your Intel Viiv Media Server

™

Once you've successfully connected your hardware, you can verify that your DIRECTV Plus HD DVR is connected at any time.

At this point your DIRECTV Plus HD DVR should now be connected to your home network. You can take advantage of your new

networking capabilities by using your Intel Viiv™ - capable to stream music and photos to your DIRECTV Plus HD DVR. This

section describes the steps.

Intel Viiv™ is a technology developed by Intel to transform your home computer into a digital entertainment center. DIRECTV

Plus HD DVR takes advantage of Intel Viiv™ Technology to stream music and photos from an Intel Viiv™ Processor

Technology-based PC.

®®

The first step in preparing your home computer for the Intel Viiv™

experience is to set up the Intel Viiv™ Technology.

Double-click on the Intel Viiv™ icon at the bottom-right corner

of the screen to display the Intel Viiv™ settings screen.

Step 1

Click on View Network Map to display the getting started screen.

Step 2

"Actual screen may appear different."

Network Your DIRECTV Plus HD DVR - QUICK START GUIDE

Set Up Your Intel Viiv Media Server

™

Follow the steps to approve the device and grant it access to

the Intel Viiv™ Media Server. Verify that the status is “approved”

and that the DIRECTV Plus HD DVR has access to the

Intel Viiv™ Media Server.

Step 4

The final step in this process is to add your music and

photos to your Intel Viiv™ Media Library. Return to the

main menu, select Media Library and follow the

instructions to build your library.

You're finished! The Intel Viiv™ settings are now set.

In the next section we’ll show you how to play music

and view photos on your DIRECTV Plus HD DVR.

Step 5

Step 3

After a few minutes, the network map is displayed. If everything

is set up correctly, you should see the internet icon, your computer

(labeled “INTEL-PC” in this example), your router

(labeled with the IP address), and and a device with an IP address

that has a question mark denoting that it is Unknown.

You can confirm that it is your DIRECTV Plus HD DVR by comparing

the IP Address on the screen with the IP Address that is displayed

in the "Advanced Setup" screen in your DIRECTV Plus HD DVR

"Network Setup" menu.

Select the "Unknown" device.

Network Your DIRECTV Plus HD DVR - QUICK START GUIDE

Use Media Share

Step 2

Step 3

Step 1

After setting up the Intel Viiv™ Technology on the PC in the

previous section, the next step is to start the media server.

Right-click on the Intel Viiv™ Technology icon at the lower

right corner and select Start Media Server.

After a few moments, an on-screen message will display

on your TV screen to confirm the connection. Press the

SELECT button on the remote to select CONTINUE.

Press the MENU button on the remote control again to

display the MENU, then select “Music & Photos".

The Media Share screen will display.

Network Your DIRECTV Plus HD DVR - QUICK START GUIDE

Use Media Share

Step 5

Step 6

Step 4

Select Music to go to the Music Submenu. Access music by Artist,

Album, Song and even Playlists! You can also select your favorite

XM Music Channel.

Your favorite music will play as you watch your TV

or view photos from your Intel Viiv™ Processor Technology-based PC.

Once the desired songs are selected from the Music Submenu,

the song's information will display on the Trick Play bar.

If you want to view photos, go to the Photos Submenu.

Select Browse and you can see several photos at once!

Network Your DIRECTV Plus HD DVR - QUICK START GUIDE

Andere Handbücher für HR10-250

Inhaltsverzeichnis

Andere DirecTV DVR Handbücher

DirecTV

DirecTV Genie 2 Technisches Dokument

DirecTV

DirecTV TiVo TCD24 Series Kurzanleitung

DirecTV

DirecTV R10 Bedienungsanleitung

DirecTV

DirecTV HR23 Betriebsanleitung

DirecTV

DirecTV HD DVR Bedienungsanleitung

DirecTV

DirecTV HR20QSG0806 Bedienungsanleitung

DirecTV

DirecTV GENIE HR54 Bedienungsanleitung

DirecTV

DirecTV HD DVR Bedienungsanleitung

DirecTV

DirecTV HD DVR PRO Bedienungsanleitung

DirecTV

DirecTV R16NC-500 Bedienungsanleitung

DirecTV

DirecTV DVR39 Bedienungsanleitung

DirecTV

DirecTV GENIE HR34 Bedienungsanleitung

DirecTV

DirecTV PLUS DVR Bedienungsanleitung

DirecTV

DirecTV HD DVR Bedienungsanleitung

DirecTV

DirecTV HR21700 Bedienungsanleitung

DirecTV

DirecTV R16-300 Bedienungsanleitung

DirecTV

DirecTV PLUS DVR - MANUEL 2 Bedienungsanleitung

DirecTV

DirecTV HR22 Bedienungsanleitung

DirecTV

DirecTV Plus HD Bedienungsanleitung

DirecTV

DirecTV R10 Bedienungsanleitung

DirecTV

DirecTV HR10-250 Bedienungsanleitung

DirecTV

DirecTV TCD2 Series Kurzanleitung

DirecTV

DirecTV Genie Bedienungsanleitung

DirecTV

DirecTV Wireless Genie Mini Technisches Dokument

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung

DIGIFUSION

DIGIFUSION FVRT150 Bedienungsanleitung