3
IP2395EN
General safety precautions
ATTENTION! Important safety instructions.
Follow these instructions carefully. Failing to follow the
instructions contained in this manual may result in serious
personal injury or damage to the equipment.
Keep these instructions for future reference.
This manual and the manuals for any accessories can be
downloaded at www.ditecautomations.com
This installation manual is intended for qualified personnel only •
Installation, electrical connections and adjustments must be car-
ried out by qualified personnel in accordance with Good Engineering
Practice and in compliance with the regulations in force • Read the
instructions carefully before starting to install the product. Incorrect
installation could cause dangerous situations • Check the integrity
of the product before starting installation
Packaging materials (plastic, polystyrene, etc.) should not be
discarded into the environment or left within the reach of
children, as they are potentially dangerous • Do not install the
product in an explosive environment or atmosphere. The presence
of flammable gases or fumes is a serious safety hazard • Ensure
that the operating temperature range indicated in the technical
data is compatible with the place of use • Before installing the
motorisation, check that the existing structure and the support
and guide components have the required strength and stability.
Check the stability and smoothness of the guided part and ensure
that there is no risk of derailment or falling. Make all structural
modifications necessary to create safety barriers and protect or
segregate all crushing, shearing, conveyance and danger zones
in general. The manufacturer of the motorisation system is not
liable for non-compliance with Good Engineering Practice in build-
ing the door or gate to be motorised or for any deformation that
may occur during use • The safety devices (photocells, sensitive
edges, emergency stops, etc.) should be installed in consideration
of the standards and directives in force, Good Engineering Practice,
the installation environment, the operating logic of the system and
the forces created by the motorised door or gate • The safety
