Divis ACAP Series Handbuch
1 DiViS
www.DiViSDVR.com
1. Specification of DiViS 3
2. Installation Notes 5
3. Products and components 6
3-1. DVR Board 6
3-2. Accessories 6
3-3. Optional Accessories 6
4. Board Description 7
4-1. DiViS CAP120A16 7
4-2. I/O Board 7
4-3. Audio Board 7
5. Installation 8
5-1. DiViS CAP120A16 Pigtail Type 8
5-2. DiViS CAP120A16 Back Panel Type 9
6. Accessories 10
6-1. Back panel 10
6-2. Video Pigtail 11
6-3. Audio Pigtail 11
6-4. Sensor Board (16 channel) 11
6-5. RS-232 to RS-485 Converter 12
6-6. PORT Converter 13
6-6-1. Specification 13
6-6-2. Layout Description 13
6-6-3. Baud Rate 14
6-6-4. Jumper Selection 14
6-7. Sound Recording 15
6-7-1. 1 channel sound 15
6-7-2. 2 channel sound 15
6-7-3. 4 channel sound 16
6-7-4. 16 channel sound 16
INDEX
2 DiViS
www.DiViSDVR.com
This is a guide book that explains the hardware components and provides you the step by
step installation of DVR board.
For the software explanation, please refer to “Installation and User’s Guide”.
This guide book is applicable to, among CHANCE-i’s products, DiViS CAP120A16 board.
The pictures and names of the products are subject to change depending on hardware
upgrade. However, the usages may be similar.
For any question you have, please contact to the following address. When you are sending
your concerned matter, please include your company name and phone number with detail
description.
E-mail: [email protected]
Tel: 949-833-1010
Fax: 949-833-1015
www.divisdvr.com
Preface
3 DiViS
www.DiViSDVR.com
1~16 Camera Inputs / Output
Up to 16 camera inputs are available on screen for digital handling.
Normal input condition: 75 Ohm, 1 Volt (p-p)
1~16 Sensor Inputs
Up to 16 sensors can be linked to the system with optional I/O Board.
External DC 12 Volt power must be provided to the sensor input from outside.
1~4 Digital Outputs (Relay Outputs)
Digital Outputs can be used to activate things like shutters and sirens, and activation can be linked to sensor
and motion detection. Optional I/O board is required.
Sound Recording and Two-Way Communication Capabilities
Sound can be recorded with video images. Two-way communication is possible between DiViS main and
DiViS Net.
Display Features (w/ Multi-Viewing)
Multi-Viewing allows 1, 4, 6, 9, 10, or 16 different camera shots to be displayed onscreen at the same time.
Other display features include enlarging all displayed cameras or just one.
PAN/TILT/ZOOM/FOCUS Capabilities
Each connected camera can be manipulated through the DiViS main program as long as each camera
supports such capabilities.
Auto Rebooting System
When DiViS detects an error or malfunction within the system, it will automatically reboot the system in order
to correct it.
Motion Detection and Sensor Trigger
Detection features make it possible to record images only when movement is detected, preserving volume
space and maximizing the use of physical storage space.
1. S
p
ecification of DiViS
4 DiViS
www.DiViSDVR.com
Scheduled Recording
Scheduling allows the administrator to record images only during designated time periods, if so desired.
Every combination of scheduling is available in the DiViS program.
Manual and Auto Backup
Data can be preserved through various formats (DAT, CD, or DVD) and data from specific cameras and/or
time periods can be specifically isolated for backup as well. Much like scheduled recording, backup of data
can be scheduled as well.
Digitalized Video Search
Recorded data features digital playback for each camera simultaneously or one at a time. Playback features
include advanced search features and image extracting, which allows portions of existing video to be
extracted and saved as a separate file.
Network Support (PSTN, TCP/IP, LAN , Modem Protocol Support)
DiViS supports network access, which allows administrators to login to DiViS main and remotely access all
the features provided locally.
POS, Access Control, ATM Support
Text data from external devices (POS, Access Control, ATM, etc) can be recorded with DVR video images.
Text Search allows to search data from external devices with DVR video image when event occurs. This will
raise the level of integrity and security.
Feature ACAP Series
Camera Input 1~16Port(NTSC/PAL)
Sound Input 1 or 2 Port (Optional 4, 16 Port)
Sensor Input 1~16 Port (Optional)
Relay Output 1~4 Port (Optional)
Composite Output 1 Port (NTSC/PAL, 1 Channel Switching)
Image Format Software MPEG-4
Recording Mode Watch, Normal, Motion Detection, Sensor, Scheduled Recording
Remote Control Full remote control PSTN, ISDN,ADSL, LAN and TCP/IP
Back-up DAT, CD, DVD
PAN/TILT/ZOOM/FOCUS RS-232 Interface (Optional RS-422/485 Converter)
5 DiViS
www.DiViSDVR.com
- Recommend to use Intel Chipset mother board.
I) It might be incompatible with mobile system or special system mother board.
Intel Chipset Motherboard
Type 865 Chipset 875 Chipset 915 Chipset 945 Chipset
Asus Yes Yes Yes Yes
Gigabyte Yes Yes Yes Yes
Intel*Yes Yes Yes Yes
MSI Yes Yes Yes Yes
*Intel 865GBF Model is not recommended
Note: Please contact technical support for the list of compatible motherboard. It is required to follow the
recommendation, due to the variable capability of motherboards.
- Recommend Intel Pentium 4 2.4 or higher for CPU.
I) CPU that is lower than Intel Pentium 4 2.4 can reduce the recording frame rate.
- Recommend 512MB or above system memory.
I) Less than 512MB of memory may bring down the overall system performance.
- RecommendATI Redeon 9000 or higher.
I) Intel onboard Extreme Graphic II or GMA900/950 are compatible. (Radeon X1K series are not compatible.)
II) Drivers must be updated to latest version, available on manufacturer’s website.
- Recommend 80GB or larger hard driver.
I) Install the latest Service Pack when using 160GB or larger hard drive.
- Recommend Windows XP.
- Disable screen saver and Standby mode.
I) Turn off System Standby mode.
II) Turn off Screen saver.
III) Turn off all the energy saving feature.
2. Installation Notes
6 DiViS
www.DiViSDVR.com
3.1 DiViS ACAP Series Board
DiViS-CAP120A16 I/O board
(Optional) Sound A16 board
(Optional)
3.2 Accessories
Pigtail Cable Audio Cable Reset Cable
3.3 Optional Accessories
Sensor Port Sensor & Relay Cable Sound external cable Sound internal cable
RS-485 Board RS-232C Cable Back Panel Video Cable
3. Products and Com
p
onents
7 DiViS
www.DiViSDVR.com
4-1. DiViS CAP120A16
4-2. I/O Board 4-3. Audio Board
4. Board Descri
p
tion
8 DiViS
www.DiViSDVR.com
5-1. DiViS CAP120A16 Pigtail Type
1) Connect Audio board with DVR board. Make sure Red line goes to the bottom.
2) Connect camera 1~8 to the BNC ports.
3) Connect camera 9~16 to the BNC ports.
4) Sensor cable connects to Sensor port.
5) The other side of sensor cable connects to IO socket on the DVR board.
6) Connect Watchdog cable. Make sure Black cable goes to the bottom as shown below.
.
5. Installation
1
2
4 4
5
3
1
9 DiViS
www.DiViSDVR.com
5-2. DiViS CAP120A16 Back Panel Type
1) Back panel.
2) Sensor Cable.
3) When connect cable to back panel make sure to leave one pin from each end.
White cable should be facing up.
4) Connect video cables. Make sure the cable with BNC2 label goes here.
5) Connect video cables. Make sure the cable with BNC9 label goes here.
6) Connect Audio board with DVR board. Make sure Red line goes to the bottom.
7) Connect Watchdog cable. Make sure Black cable goes to the bottom as shown below.
1
2
1
4
5
4
5
3 3
7
6 6
Andere Handbücher für ACAP Series
2
Inhaltsverzeichnis
Andere Divis DVR Handbücher
Divis
Divis DVR Bedienungsanleitung
Divis
Divis ACAP Series Handbuch
Divis
Divis CHSM48016 Bedienungsanleitung
Divis
Divis DVR Bedienungsanleitung
Divis
Divis H.264 Series Handbuch
Divis
Divis ACAP Series Bedienungsanleitung
Divis
Divis 120N16 Bedienungsanleitung
Divis
Divis HD-SDI Series Handbuch
Divis
Divis D1 Series Bedienungsanleitung
Divis
Divis HD-SDI Series Bedienungsanleitung
