Dormakaba Axessor CIT Bedienungsanleitung

Electronic safe lock

Axessor CIT

V28 - 08/2019

Technical Manual

dormakaba Schweiz AG

Mühlebühlstrasse 23

8620 Wetzikon

Switzerland

T: +41 (0)44 931 61 11

www.dormakaba.com

No part of this document may be reproduced or used in any form or by any means without prior written permis-

sion of dormakaba Schweiz AG.

All names and logos of third-party products and services are the property of their respective owners.

Subject to technical changes.

V28 - 08/2019

Version notesTechnical Manual

3V28 - 08/2019 Electronic safe lock

Version notes

Document version Date Reason

02 2019-08 New functionalities included

01 2018-03 New functionalities included

00 2017-10 New document created

Firmware version Date Reason

V28 2019-08 New functionalities and optimizations:

• Setting up Axessor CONNECT safe lock sys-

tems with up to 10 locks, 2 input units and 1

eBox

• Extended functionality of the safe locks: the

Device Manager being able to manage safe

lock systems

• Operating the safe lock system via the input

unit or via AS284-USBW / NETW

• Motorized latchbolt locks

• Worldwide DST function

• GUI texts of AS280-INSW and AS284-

USBW / NETW and audit added and revised

• Several issues of AS284-USBW / NETW

added and revised

V27 2018-03 New functionalities and optimizations:

• Keep arrow keys pressed while automatically

changing the adjusting value to a higher or

lower value

• Changing or creating codes without using a

workaround

• Setting the time in AM/PM without using a

workaround

• Texts revised in GUI of AS280-INSW and

AS284-USBW/NETW and audit

• Several issues revised of AS284-USBW/

NETW

V26 2017-10 New functionalities and optimizations:

• Partial Locking in Bank Mode with activated

Dual Mode

• Adjustable maximum value of time locking

periods while activating the Immediate Time

Lock

• Local language selection in the menu "info"

• Setting Wake Up in Mixed Mode

• Stabilized "Line off" behavior

• No special characters in the audit function

Version notes Technical Manual

4 V28 - 08/2019Electronic safe lock

Firmware version Date Reason

• Operating system compatibility of AS284-W

programming software

• AS284-W programming software with ex-

tended function

V24 2017-06 New functionality:

• The Master Code can override the Immediate

Time Lock

V23 2017-02 New functionalities:

• Time Locking in OTM

• Axessor CIT safe lock with time display

• Harmonized bolt open times

• OTM can override NRTD

• Special function: User Code 41 configured as

Audit and Battery Code

• Special function: User Code 42 configured as

Audit and Battery Code and used for CIT or

IP activation

• Special function: User Codes 45 and 46 used

for activation of the output impulse signal

• Special function: User Code 47 configured as

Time, Audit and Battery Code

• Special function: User Code 48 used for Lock

Disabling and User Code 49 used for Lock En-

abling

• Immediate Time Lock when the safe is closed

• Setting the beeper via input unit

• Selection of days for time-related functions

• Door Open Alarm is separately configurable

• Dual Mode timeout is configurable

Table of ContentsTechnical Manual

5V28 - 08/2019 Electronic safe lock

Table of Contents

Glossary 7

1 About this document 9

1.1 Purpose and objective 9

1.2 Target group 9

1.3 Compliance with safety and standards 9

2 Safety information 10

2.1 Intended use 10

2.2 Hazard category 10

3 Norms, standards and regulations 11

4 Certificates 12

5 System overview 13

6 System description 15

6.1 The Axessor CIT electronic safe locks 15

6.2 Product variants 15

6.2.1 Standalone variant with a single lock 15

6.2.2 Standalone variant with multiple locks 16

6.2.3 Network variant with a single lock and an optional eBox 17

6.2.4 Network variant with multiple locks and an optional eBox 18

7 Software applications 20

8 Scope of application 21

9 Technical data 22

9.1 Hardware 22

9.2 Interfaces 22

9.3 Mechanical components 23

9.4 Conditions 23

10 Factory settings 24

11 Functionality 29

11.1 Display elements of the input unit 29

11.2 Information menu 29

11.3 Immediate Time Lock 30

11.4 Time-Related Functions 30

11.5 Beep signals 31

11.6 Status messages 31

11.6.1 Bank Mode and One Time Mode 31

11.7 Access codes 37

11.7.1 Code hierarchy and code formats 37

11.7.2 Code types 38

12 Access rights 44

13 Unpacking and checking delivery 54

13.1 Checks before installation 54

Table of Contents Technical Manual

6 V28 - 08/2019Electronic safe lock

14 Installation 55

14.1 Drilling templates 55

14.2 Installing the input unit 57

14.3 Installing the lock 63

14.4 External connections on the lock 65

14.5 Installing the eBox 67

14.6 External connections on the eBox 67

14.7 eBox wiring diagram 69

14.8 Wiring 69

14.8.1 Cold plugging 69

14.8.2 Hot plugging 71

14.8.3 Wiring options 72

14.9 Wiring check of the lock 73

14.10 Wiring check of the eBox 73

15 Configuration 74

15.1 Programming Mode 74

15.1.1 Menu overview of the master lock 74

15.1.2 Accessing the Programming Mode 75

15.1.3 Changing and saving settings 76

15.1.4 Exiting the Programming Mode 76

15.1.5 Menu TIME 76

15.1.6 Menu PROG 78

15.1.7 Menu DELAY 85

15.1.8 Menu CODE 91

15.1.9 Menu MISC 95

16 Operation 107

16.1 Operating modes 107

16.2 Code entry 109

16.3 Lock opening procedure 110

16.3.1 Opening procedure in Bank Mode 110

16.3.2 Opening procedure in ICS Mode 111

16.3.3 Opening procedure in OTC Mode 112

16.4 Lock closing procedure 113

16.4.1 Closing procedure in Bank Mode 113

16.4.2 Closing procedure in OTM 113

17 Troubleshooting 114

17.1 Status messages on LCD 114

17.2 Identification of the lowest serial number 116

18 Service 117

18.1 Cleaning 117

18.2 Replacing batteries 117

19 Maintenance 119

19.1 Replacing a defect lock 119

19.1.1 Removing the defect lock from the safe lock system 119

19.1.2 Adding a new lock to the safe lock system 120

19.2 Removing the error message of lock position -16- 122

20 Disposal 124

21 Spare parts and accessories 125

GlossaryTechnical Manual

7V28 - 08/2019 Electronic safe lock

Glossary

Terms Meaning

A-CIT 28 Axessor CIT, version 28

A-IP 28 Axessor IP, version 28

A-IP N 28 Axessor IP NOT version 28

APHI Application Programming Hardware Interface

AS274 AS274 server management software

AS280-INSW AS280 Installation Software and Wibu dongle

AS284-NETW AS284 Network Solutions and Wibu dongle (programming soft-

ware)

AS284-USBW AS284 Universal Serial Bus and Wibu dongle (programming

software)

ATM Automated Teller Machine

A-USB Axessor USB, version 28

BAT-CMP Battery Compartment

BLT OPN Bolt Open Time

CDE DEN Code Denial

CIT Cash In Transit

CNF WIN Confirmation Window

CNF WIN beep Confirmation Window beep

CONF Confirmation

D-ALARM Door Alarm

DEL key Key used to delete entry or to close the lock.

DEVICE Device Manager used to manage the safe lock system.

DM Dual Mode

DST Daylight Saving Time

ENTER key Key used to enter codes or to confirm parameterization.

GDPR General Data Protection and Regulation

ICS Interactive Code System

IMM-TL Immediate Time Lock

INFO/ESC key Key used to activate the info display, to escape or to go to a

higher level.

LAN Local Area Network

LANG Language

LCD Liquid Crystal Display

LED Light-Emitting Diode

LEFT and RIGHT keys Keys used to select and adjust settings.

MISC Miscellaneous

MOT FLT Motion Fault

NRTD Non-Return Time Delay

NRTD HM Non-Return Time Delay in Hours/Minutes

Glossary Technical Manual

8 V28 - 08/2019Electronic safe lock

Terms Meaning

ONE SC4 bank One Shot Codes for Bank Mode

OTC One Time Code

OTM One Time Mode

PRG-MOD Programming Mode

PROCTIM cit Process Time CIT

RMT-DIS Remote Disabling

SM Single Mode

TL-INT Time Locking Interruption

TR-FCN 1 ... 3 Time-Related Function 1 ... 3

TST BGN Test begin

A wiring test will be executed.

TST END Test end

The wiring test is finished.

0 ... 9 Numeric keys 0 ... 9

About this documentTechnical Manual

9V28 - 08/2019 Electronic safe lock

1 About this document

1.1 Purpose and objective

This Technical Manual describes the Axessor CIT electronic safe locks with network capabili-

ties.

It gives information on:

• The system and components

• Technical data

• Functionality

• Installation

• Configuration

• Operation

• Troubleshooting

• Service

• Maintenance

• Spare parts and accessories.

1.2 Target group

This document exclusively addresses itself to skilled personnel (technicians) trained and au-

thorized by the manufacturer.

1.3 Compliance with safety and standards

For safety and warranty reasons all actions described in this document must only be carried

out by skilled personnel (technicians). Skilled personnel must comply with the respective regu-

lations on work safety and prevention of accidents.

Safety information Technical Manual

10 V28 - 08/2019Electronic safe lock

2 Safety information

2.1 Intended use

The purpose of the electronic safe lock is to lock and unlock the mechanical blocking point of a

safe, vault, data cabinet or ATM which is usually activated manually by bolt work.

Do not modify the electronic safe lock since it will impair the security and safety of the unit.

The electronic safe lock is only designed for indoor applications. It must be applied in environ-

mentally protected areas.

2.2 Hazard category

NOTICE

Information on how to handle the product correctly.

Failure to observe this information may result in malfunctions. The device or something in its

vicinity could be damaged.

Inhaltsverzeichnis

Andere Dormakaba Sperren Handbücher

Dormakaba

Dormakaba Cobalt Single Bedienungsanleitung

Dormakaba

Dormakaba Kaba Star Bedienungsanleitung

Dormakaba

Dormakaba UNIQUIN Bedienungsanleitung

Dormakaba

Dormakaba digital cylinder Bedienungsanleitung

Dormakaba

Dormakaba RCI DE8310 Bedienungsanleitung

Dormakaba

Dormakaba SL30DBL Cobalt Double Bedienungsanleitung

Dormakaba

Dormakaba 8H Series Bedienungsanleitung

Dormakaba

Dormakaba Classic Bedienungsanleitung

Dormakaba

Dormakaba BEST Wi-Q 45HQ Bedienungsanleitung

Dormakaba

Dormakaba 2725-K6 Bedienungsanleitung

Dormakaba

Dormakaba STV 2 Series Bedienungsanleitung

Dormakaba

Dormakaba RCI 3513-DM Bedienungsanleitung

Dormakaba

Dormakaba GL10 Bedienungsanleitung

Dormakaba

Dormakaba SVI Series Bedienungsanleitung

Dormakaba

Dormakaba SafeRoute-System Mini Bedienungsanleitung

Dormakaba

Dormakaba ORACODE 480 Series Bedienungsanleitung

Dormakaba

Dormakaba LA GARD 700 Series Bedienungsanleitung

Dormakaba

Dormakaba YD30S Handbuch

Dormakaba

Dormakaba STV 1 Series Bedienungsanleitung

Dormakaba

Dormakaba LA GARD 700 Series Bedienungsanleitung

Dormakaba

Dormakaba SVI 5000 Schulungshandbuch

Dormakaba

Dormakaba Saflok Quantum Pixel Bedienungsanleitung

Dormakaba

Dormakaba La Gard Reset Box Bedienungsanleitung

Dormakaba

Dormakaba LA GARD ComboGard Pro 39E Handbuch

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung