Dragon Touch K4W10 Bedienungsanleitung
USER MANUAL
Dragon Touch K4W10 HD NVR KIT
v1.0
What's in the Box
Introduction
Specifications
Installation and Connections
Menu Operation
Legal Disclaimer
Regulatory Information
EU Conformity Statement
Safety Instructions
Preventive and Cautionary Tips
Contact Us
2
3
4
5
8
30
30
31
32
33
33
CONTENTS
1
EN
WHAT'S IN THE BOX
2
NVR × 1 Security Camera × 4 Mouse × 1
Antenna Extension
Cable × 1
Network Cable × 1Power Adapter × 5
Quick Start Guide × 1
V1.0
Quick Start Guide
Dragon Touch K4W10 HD NVR KIT
EN
3
INTRODUCTION
1. NVR Front Panel
2. Rear Panel
Antenna
Alarm Indicator
Power Indicator
REC Indicator OK Button Menu
ESC
Audio-Out
VGA
HDMI
RJ45
USB
DC
Antenna PortAntenna Port
USB
EN
4
SPECIFICATIONS
1. NVR (Network Video Recorder)
EN
Type 3MP Wireless NVR
NVR Chip HISILICON chip
Video Input 8 channels
Audio Compression
Video Compression
Operating System Embedded LINUX
Recording Mode
Sync Playback Supports 8-channel 720P/960P/1080P
synchronous playback
Playback Speed 1/4, 1/2, 2X, 4X
Storage & Backup Hard disk, USB drive
Antenna
Wireless Transmission
Range
394 ft (120 m) without obstacles, 98.4 ft (30 m) through
walls (actual range varies depending on the environment)
Video Input Capabilities
Video Output Capabilities
Interface
HDD
Remote Access
Network
Other Features
G.711
H.265/H.264
Manual/Motion Detection/Schedule/Alarm/
Human Recognition
2 × 5dB antenna with built-in professional
enhanced wireless reception
Supports 8-channel 3MP video signal input and
8*1080P/8*960P/8*720P
720P60, XGA, 1080P60
VGA port, HDMI port, RJ45 port, USB ports,
DC12V input jack
Supports up to 8TB SATA HDD (HDD not included)
Supports Android, iOS smartphone, webpage access
2.4G wireless network
Digital WDR, 3D noise reduction,
Day/Night switch, flip, etc.
5
EN
INSTALLATION AND CONNECTIONS
1. Installation
USB
Note:
• Internet connection is required for remote viewing.
• Do not connect the NVR to a computer directly. It must be connected to a TV or
monitor only.
Connect the
monitor
Connect the
mouse
Connect the NVR and
IPC antenna
Connect to
power
(IPC and NVR)
Connect the
router
(LAN or Wifi)
LAN/Wifi
EN
2. Camera
Image Sensor: HISILICON 3MP image sensor
Video Compression: H.265/H.264
Recording Mode: Manual/Motion Detection/Schedule/Alarm/Human Recognition
Input: DC 12V
Antenna: Built-in professional enhanced wireless reception
6
Correct method Incorrect method
2. Hard Disk Installation
The NVR system requires a 3.5" or 2.5" SATA internal hard drive or mobile hard
disk drive for video recording. Without installing a hard drive, the system can
display real-time video, but cannot record or play back video footage. The system
supports a hard drive of up to 8TB.
Note:
• Hard disk drive sold separately.
• Installing a 2.5-inch SATA hard drive may require a bracket (sold separately).
①Remove the screws ②Remove the cover
EN
7
④ Connect the power wire③Connect the data wire
⑥Put the cover back, and secure
the screws of the cover
⑤Secure the screws of the hard drive
Note:
• Please power off the NVR before you install the hard drive.
• The system cannot record or play back video without a hard drive.
EN
8
MENU OPERATION
1. Startup Wizard
After booting up the NVR, the Startup Wizard will be displayed on the screen. If you
don't want to see the Startup Wizard next time, you can check and enable
"No more hints", then click [Next].
2. Modify Password
The first time you run the NVR, you must log in and set a new password. There is
no need to enter a password when you log in for the first time. Just click [OK] to
log in and click [OK] to set a new password.
[New]: Input a new password.
[Confirm]: Retype the same password.
EN
9
3. Safety Question
Set a safety question to reset the NVR password if you forget it, then click [Next].
[Question]: Select a security question.
[Answer]: Enter the answer.
[Way to receive verification code]: Supports monitor APP or email.
EN
Andere Handbücher für K4W10
1
Inhaltsverzeichnis
Andere Dragon Touch DVR Handbücher
