Draytek Vigor2865ac-B Bedienungsanleitung

Vigor2865 Series

35b Security Firewall

Quick Start Guide

(for RF Model)

Version: 1.4

Firmware Version: V4.3.2

(For future update, please visit DrayTek web site)

Date: September 8, 2021

Intellectual Property Rights (IPR) Information

by copyright. No part may be reproduced, transmitted, transcribed, stored in

a retrieval system, or translated into any language without written permission

from the copyright holders.

Trademarks The following trademarks are used in this document:

Microsoft is a registered trademark of Microsoft Corp.

Windows 8, 10 and Explorer are trademarks of Microsoft Corp.

Apple and Mac OS are registered trademarks of Apple Inc.

Other products may be trademarks or registered trademarks of their

respective manufacturers.

Safety Instructions and Approval

Safety

Instructions

Read the installation guide thoroughly before you set up the router.

The router is a complicated electronic unit that may be repaired only be

authorized and qualified personnel. Do not try to open or repair the

router yourself.

Do not place the router in a damp or humid place, e.g. a bathroom.

Do not stack the routers.

The router should be used in a sheltered area, within a temperature

range of +5 to +40 Celsius.

Do not expose the router to direct sunlight or other heat sources. The

housing and electronic components may be damaged by direct sunlight or

heat sources.

Do not deploy the cable for LAN connection outdoor to prevent electronic

shock hazards.

Keep the package out of reach of children.

When you want to dispose of the router, please follow local regulations on

conservation of the environment.

Warranty

We warrant to the original end user (purchaser) that the router will be free

from any defects in workmanship or materials for a period of two (2) years

from the date of purchase from the dealer. Please keep your purchase receipt

in a safe place as it serves as proof of date of purchase. During the warranty

period, and upon proof of purchase, should the product have indications of

failure due to faulty workmanship and/or materials, we will, at our discretion,

repair or replace the defective products or components, without charge for

either parts or labor, to whatever extent we deem necessary tore-store the

product to proper operating condition. Any replacement will consist of a new

or re-manufactured functionally equivalent product of equal value, and will

be offered solely at our discretion. This warranty will not apply if the product

is modified, misused, tampered with, damaged by an act of God, or subjected

to abnormal working conditions. The warranty does not cover the bundled or

licensed software of other vendors. Defects which do not significantly affect

the usability of the product will not be covered by the warranty. We reserve

the right to revise the manual and online documentation and to make changes

from time to time in the contents hereof without obligation to notify any

person of such revision or changes.

Declaration of Conformity

Hereby, DrayTek Corporation declares that the radio equipment type Vigor2865 is in compliance with

Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following internet address:

https://www.draytek.com.tw/ftp/Vigor2865/Document/CE/

Manufacturer: DrayTek Corp.

Address: No. 26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan

Product: Vigor2865 Series

Frequency Information for Europe area:

2.4G WLAN 2412MHz - 2472 MHz, max. TX power: 19.98dBm *1

5G WLAN 5160MHz - 5340 MHz, max. TX power: 22 dBm *2

5480MHz - 5720 MHz, max. TX power: 27 dBm

LTE B1[1920-1980 MHz (TX); 2110-2170 MHz (RX)]; B3[1710-1785 MHz (TX);

1805-1880 MHz (RX)]; B7[2500-2570 MHz (TX); 2620-2690 MHz (RX)];

B8[880-915 MHz (TX); 925-960 MHz (RX)]; B20[832-862 MHz (TX); 791-821

MHz (RX)]; *3

3G B1[1920-1980 MHz (TX); 2110-2170 MHz (RX)]; B3[1710-1785 MHz (TX);

1805-1880 MHz (RX)]; B5[824-849 MHz (TX); 869-894 MHz (RX)]; B8[880-915

MHz (TX); 925-960 MHz (RX)] *3

Requirements in AT/BE/BG/CZ/DZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/

CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/

UK/HR. 5150MHz~5350MHz is for indoor use only.

(*1: for 2.4G WLAN model; *2: for 5G WLAN model; *3: for LTE model)

This product is designed for LTE, DSL and 2.4GHz /5GHz WLAN network throughout the EC region.

*The external power supply used for each product will be model dependent.

1 2 3 4 5 6 7 8 9

A Manufacturer CWT CWT CWT CWT CWT APD APD APD APD

B Address No. 222, Sec.

2, Nankan Rd.,

Lujhu

Township,

Taoyuan

County 338,

Taiwan

No. 222, Sec.

2, Nankan Rd.,

Lujhu

Township,

Taoyuan

County 338,

Taiwan

No. 222, Sec.

2, Nankan Rd.,

Lujhu

Township,

Taoyuan

County 338,

Taiwan

No. 222, Sec.

2, Nankan Rd.,

Lujhu

Township,

Taoyuan

County 338,

Taiwan

No. 222, Sec.

2, Nankan Rd.,

Lujhu

Township,

Taoyuan

County 338,

Taiwan

No.5, Lane 83,

Lung-Sou St.,

Taoyuan City

330, Taiwan

No.5, Lane 83,

Lung-Sou St.,

Taoyuan City

330, Taiwan

No.5, Lane 83,

Lung-Sou St.,

Taoyuan City

330, Taiwan

No.5, Lane 83,

Lung-Sou St.,

Taoyuan City

330, Taiwan

2ABB012F UK 2ABB018F UK 2ABL024F UK

2ABL030F UK

2ABN036F UK

WA-12M12FG

WB-18D12FG WA-24Q12FG WA-36A12FG

C Model identifier 2ABB012F EU 2ABB018F EU 2ABL024F EU

2ABL030F EU

2ABN036F EU

WA-12M12FK

WB-18D12FK WA-24Q12FK WA-36A12FK

D Input voltage 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V

Input AC frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60HzE Output voltage DC 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V 12.0V

F Output current 1.0A 1.5A 2.0A 2.5A 3.0A 1.0A 1.5A 2.0A 3.0A

G Output power 12.0W 18.0W 24.0W 30.0W 36.0W 12.0W 18.0W 24.0W 36.0W

H Average active

efficiency 84.9% 86.2% 87.6% 87.8% 89.8% 83.7% 85.4% 88.6% 88.2%

I Efficiency at low load

10% 73.6% 78.0% 81.3% 83.3% 83.7% 74.5% 80.5% 86.4% 85.4%

J No-load power

consumption 0.07W 0.07W 0.07W 0.07W 0.07W 0.07W 0.10W 0.07W 0.10W

External power supply (Power Adapter) information. For more update, please visit www.draytek.com.

iii

Regulatory Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device may accept any interference received, including interference that may cause

undesired operation.

Company name ABP International Inc.

Address 13988 Diplomat Drive Suite 180 Dallas TX 75234

ZIP Code 75234 E-mail rmesser@abptech.com

USA Local

Representative Contact Person Mr. Robert

Messer Tel. 19728311600

Caution:

Any changes or modifications not expressly approved by the grantee of this device could void the

user's authority to operate the equipment.

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment. This equipment should be installed and operated with minimum

distance 20cm between the radiator & your body.

The antenna/transmitter should be kept at least 20 cm away from human body.

More update, please visit www.draytek.com.

1. Package Content .................................................................................................. 1

2. Panel Explanation................................................................................................. 2

2.1 Vigor2865L................................................................................................................................. 2

2.2 Vigor2865ac / Vigor2865Lac / Vigor2865ax .................................................................................... 4

2.3 Vigor2865Vac...............................................................................................................................8

3. Hardware Installation ......................................................................................... 10

3.1 Network Connection................................................................................................................. 10

3.2 Wall-Mounted Installation..........................................................................................................11

3.3 Antenna Installation (for “L” model).......................................................................................... 12

4. Software Configuration...................................................................................... 14

4.1 Quick Start Wizard for Network Connection............................................................................. 14

5. Customer Service............................................................................................... 20

Be a Registered Owner.................................................................................................................. 20

Firmware & Tools Updates............................................................................................................. 20

Take a look at the package content. If there is anything missed or damaged,

please contact DrayTek or dealer immediately. Besides, the content is subject to

the real package.

Vigor router Antenna + Socket (L models)

RJ-45 to RJ-45 Cable

(Annex B) RJ-11 to RJ-45 Cable (Annex B)

RJ-11 to RJ-11 Cable (Annex A)

Quick Start Guide Antenna (ac/ax models)

The type of the power adapter depends on the country that the router will be

installed. * The maximum power consumption is 28 Watts.

UK-type Power Adapter EU-type Power Adapter

USA/Taiwan-type Power Adapter AU/NZ-type Power Adapter

LED Status Explanation

Off The router is powered off.ACT Blinking The router is powered on and running

normally.

On Internet connection is ready.

Off Internet connection is not ready.

WAN2

Blinking The data is transmitting.

On The QoS function is active.QoS Off The QoS function is inactive.

On LTE device is connected and ready for use.

Off LTE device is not detected, or has serious

problem (e.g., no SIM card, SIM pin error, SIM

deactivated, and etc.).

LTE

Blinking Slowly: LTE device is in dialing up.

Quickly: The data is transmitting.

On The router is ready to access Internet through

DSL link.

DSL

Blinking Slowly: The DSL connection is ready.

Quickly: The connection is training.

On The Web Content Filter is active. (It is enabled

from Firewall >> General Setup).

WCF

Off WCF is disabled.

On USB device is connected and ready for use.

Off No USB device is connected.

USB

Blinking The data is transmitting.

On The VPN tunnel is active.

Off VPN services are disabled

VPN

Blinking Traffic is passing through VPN tunnel.

On The DMZ function is enabled.

Off The DMZ function is disabled.

DMZ

Blinking The data is transmitting.

LED on Connector

On The port is connected.

Off The port is disconnected.

WAN2

/ P6

Left

LED Blinking The data is transmitting.

On The port is connected with 1000Mbps.

Right

LED Off The port is connected with 10/100Mbps.

On The port is connected.

Off The port is disconnected.

Left

LED Blinking The data is transmitting.

On The port is connected with 1000Mbps.

LAN

P1~P5

Right

LED Off The port is connected with 10/100Mbps.

The port “WAN2 / P6” is switchable. It can be used for LAN connection or WAN

connection according to the settings configured in WUI.

Interface Description

Factory Reset Restore the default settings. Usage: Turn on the router

(ACT LED is blinking). Press the hole and keep for more than

5 seconds. When you see the ACT LED begins to blink

rapidly than usual, release the button. Then the router will

restart with the factory default configuration.

USB Connecter for a USB device (for 3G/4G USB Modem or

printer or thermometer).

WAN2 / P6 Connecter for local network devices or modem for

accessing Internet.

LAN P1-P5 Connecters for local network devices.

DSL Connecter for accessing the Internet.

PWR Connecter for a power adapter.

ON/OFF Power Switch.

Connecter for installing LTE antennas.

SIM 2/ SIM 1 Slots for installing SIM card.

LED Status Explanation

Off The router is powered off.ACT Blinking The router is powered on and running

normally.

On Internet connection is ready.

Off Internet connection is not ready.

WAN2

Blinking The data is transmitting.

On The QoS function is active.QoS Off The QoS function is inactive.

On USB device is connected and ready for use.

Off No USB device is connected.

USB

Blinking The data is transmitting.

On LTE device is connected and ready for use.

Off LTE device is not detected, or has serious

problem (e.g., no SIM card, SIM pin error, SIM

deactivated, and etc.).

LTE

Blinking Slowly: LTE device is in dialing up.

Quickly: The data is transmitting.

On The router is ready to access Internet through

DSL link.

DSL

Blinking Slowly: The DSL connection is ready.

Quickly: The connection is training.

On The Web Content Filter is active. (It is

enabled from Firewall >> General Setup).

WCF

Off WCF is disabled.

2.4G/5G On 2.4G/5G: Wireless access point with

bandwidth of 2.4GHz/5GHz is ready.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Draytek Netzwerk-Router Handbücher

Draytek

Draytek Vigor2600VG Bedienungsanleitung

Draytek

Draytek Vigor2920 Series Bedienungsanleitung

Draytek

Draytek Vigor IPPBX 2820 Bedienungsanleitung

Draytek

Draytek Vigor 2760 Series Bedienungsanleitung

Draytek

Draytek Vigor2200 Series Bedienungsanleitung

Draytek

Draytek Vigor2135 Series Bedienungsanleitung

Draytek

Draytek Vigor2760Vn Bedienungsanleitung

Draytek

Draytek Vigor 110 Bedienungsanleitung

Draytek

Draytek Vigor 2927 Series Bedienungsanleitung

Draytek

Draytek Vigor 2800 Referenzhandbuch

Draytek

Draytek Vigor 2930 Bedienungsanleitung

Draytek

Draytek Vigor 2110f Series Bedienungsanleitung

Draytek

Draytek Vigor 2700 Series Bedienungsanleitung

Draytek

Draytek Vigor 2950i Referenzhandbuch

Draytek

Draytek Vigor2925 Series Bedienungsanleitung

Draytek

Draytek Vigor2927 Series Bedienungsanleitung

Draytek

Draytek Vigor 2700 Series Bedienungsanleitung

Draytek

Draytek Vigor2620 Series Bedienungsanleitung

Draytek

Draytek Vigor 2750 Series Bedienungsanleitung

Draytek

Draytek Vigor2110 Series Bedienungsanleitung

Draytek

Draytek Vigor3300V+ Bedienungsanleitung

Draytek

Draytek Vigor2300 Einrichtungshandbuch

Draytek

Draytek Vigor2600 plus Series Bedienungsanleitung

Draytek

Draytek Vigor 2620 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise