Dyson 360 Vis Nav Bedienungsanleitung

User manual

SV12 JN.00000 PN.000000-00-00

00.00.00 VERSION NO.01

Contents

Getting started

Downloading the MyDyson™app

Connecting to Wi-Fi

Setting up your dock

Setting the language

Preparing to clean

Starting a clean

Mapping your home

Zoning your home

Scheduling and reviewing cleans

Looking after your robot

Emptying your bin

Washing your filter

Maintaining your brush bar

Cleaning your camera lens and sensors

Alerts

Resetting and upgrading software

dyson 360 visnav

Getting started

Eight LEDs allow

the robot to

clean in low-light

conditions.

Auto mode

Analyses dust levels,

automatically optimising

suction power.

Boost mode

Boosts suction to clean

ground-in dirt and pet

hair. Extra power with

less run time.

Quiet mode

Reduces noise for

peaceful areas – and

longer run time.

Triple-action brush bar

Intelligent navigation

Power modes

Four modes, to clean

your way.

LCD touchscreen lets

you see real-time

feedback and choose

between modes.

Swipe through menus,

tap to select, press

and click to confirm

your selection.

LCD touchscreen

Quick mode

Piezo sensor

Detects changes in dust

levels, automatically

increasing suction power

where needed.

Edge cleaner

Tailor your robot with the

MyDyson™app

Set your robot’s behaviour to

suit your lifestyle. Have it learn

your home’s layout, so you can

schedule it to clean when, where

and how you want – only with the

MyDyson™app. If you haven’t

already, download it now.

Automatically redirects

suction to pick up dust

and debris right up to

the wall.

Extends the full width of the

machine to clean edge-

to-edge. Black anti-static

carbon fibre filaments

extract fine dust from hard

floors, stiff nylon bristles

remove ground-in dirt from

carpets, and soft woven

nylon captures large debris.

LED light ring

26 sensors. 360°

panoramic vision.

Allowing the robot to

systematically navigate

and adapt.

To stay on top of every day

cleans in open areas. Your

robot won’t deep clean

edges and corners.

Close up of orange

quick mode arrow

as shown on

machine screen.

Close up of green quiet

mode arrow as shown

on machine screen.

Close up of red

boost mode arrow

as shown on

machine screen.

Close up of blue

auto mode arrow

as shown on

machine screen.

The LCD touchscreen is

located on the top of the

robot between the bin and

LED light ring

Brush bar is housed

within the front of the

robot

The domed

LED light ring

is located at

the top of the

machine to the

front

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and

the Google Play logo are trademarks of Google Inc.

Connecting to Wi-Fi

Downloading the MyDyson™app

Control your robot – wherever you are. You can start cleaning, check your

robot’s progress or troubleshoot a problem. If you haven’t already,

download the app now for extra features and the latest updates.

Download the MyDyson™app from the App Store or Google Play.

Open the app and follow the on-screen instructions to create a new account.

Download the MyDyson™app

Choose your robot and follow the instructions on the MyDyson™app

to get connected.

Connection problems

Your robot accesses the Dyson cloud through your home Wi-Fi network.

If you have a problem connecting, your robot can help get you back online.

Go into the settings menu on your robot’s LCD touchscreen and press

and click the Wi-Fi icon. Your robot will indicate what Wi-Fi network it is

connected to and the signal strength.

If your robot has failed to connect, press and click on ‘Check connection’ to

diagnose the problem. If your robot is not connected to your Wi-Fi router or

the internet, try the following:

Move your robot close to your Wi-Fi router, then turn your robot off and on

again to reconnect.

Check other devices on the same Wi-Fi network can access the internet.

If not, turn your router off and on again. If the problem persists, contact your

internet service provider.

If you have changed your Wi-Fi network settings, you may need to

re-connect your robot. Follow the ‘Change or add new Wi-Fi network’

instructions to re-connect.

If your robot is not connected to the Dyson cloud, try connecting to your robot

again later.

Changing or adding a new Wi-Fi network

Open the settings menu in the MyDyson™app and scroll down to

‘Add new Wi-Fi’.

Follow the on-screen instructions to add a new Wi-Fi network.

Hold mobile

device close to the

robot to pick up

signal

Setting up your dock

Choose a location

Assemble your dock

It’s important that you locate the dock carefully, as the robot will need clear

access to it.

The dock should be located against a wall, on a level surface, close to a

mains power supply. Make sure the position is out of bright sunlight and

not obscured under a table or other furniture.

The dock also needs to have at least 50 cm of clear space around the sides

and at least 1m in front.

Plug the charger connector in to the back of the dock and connect to the

mains power supply. A blue LED will light up when power is connected.

Wrap any excess cable around the cable tidy on the back of the dock.

Align the back panel of the dock with the floor section and press until it clicks

into place. The back panel is removable if you need to dismantle your dock.

Standby power

To save energy when it’s on the dock, your robot will go into standby mode

and the LCD touchscreen will dim.

You can activate your robot by pressing the LCD touchscreen, or by using

the app or voice control.

Powering off

If you need to turn off your robot’s power, take it off the dock. Press and hold

the screen until the Power off menu appears on the screen. Press and click

the LCD touchscreen to confirm.

Place your robot on the dock to turn the power on again.

Plug in and charge

Place your robot on the dock. Your robot will turn on and the

LCD touchscreen will light up.

The power cable

should be inserted

into the socket located

on the top, right hand

side on the back of the

dock.

The robot sits in the

front of the dock

between the floor plate

and the front ridge.

Preparing to clean

Setting the language

Caring for your floors

Prepare your home

Remove thin rugs or loose objects that your robot may suck up. Tidy small

items such as shoe laces or thin cables that your robot won't detect and may

get tangled in the brush bar.

Clean any liquid spills or sharp items that could damage your robot.

Open all doorways and clear away any furniture or items that are not

permanent so that your robot can access all areas.

Clear away any obstructions from drops or steps.

Language

Settings

About

When you first set up your machine, you’ll need to select the language your

robot will use.

Scroll up and down, through the languages.

When the language you’d like is highlighted, press and click the LCD

touchscreen to confirm your selection.

Check that the underside of your robot is clean and free from any objects that

may cause damage.

Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s

recommended cleaning instructions.

The brush bar on your robot can damage certain carpet types and floors.

Some carpets will fuzz if a rotating brush bar is used when vacuuming.

We recommend blocking access or creating a ‘No brush bar’ area in the

MyDyson™app.

Starting a clean

Start from the dock

Start the clean by choosing your power mode then press and click the LCD

touchscreen or from the app, to start the clean. Your robot will clean all

areas that are accessible.

Your robot will return to the dock to charge when the battery is low.

Once your robot has charged, it will automatically continue its clean.

Starting a clean off the dock

To clean a specific area or a different level, start your robot away from the dock.

Your robot will clean all the accessible space it can reach on a single charge.

Your robot won't return to the dock to charge, when the battery is low, but return

to its starting point.

You won’t be able to start your clean from the MyDyson™app and your robot

won’t obey room boundaries or restrictions.

Start from the dock with the MyDyson™app or voice control

Start the clean using either the MyDyson™app or with voice control that you

have set up.

Choose to use a customised clean of an individual room, a selection of

rooms, or clean all accessible areas. Your robot will clean following your

mapping, zoning and restriction settings in the MyDyson™app.

Use the MyDyson™app to start your clean or press and click the LCD

touchscreen. You can start your clean from the dock or pick up your robot

and move it to a specific position.

Mapping your home

Prepare to map your home

Before mapping, it’s a good idea to tidy up any loose objects from the floor,

open internal doors and remove any items that may be moved between

cleans. Place your robot on the dock and you can start mapping.

Building a complete map can take time, and depends on the size of your

home (100 sq m may take approximately 90 minutes). During the mapping

process, leave your robot to create your map. It will return to the dock by itself

when mapping is complete.

Create a map

Your robot follows an optimised route to systematically clean your home,

with the brush bar and suction turned off to minimise the time taken to

map. For best results, avoid interrupting your robot while it's mapping.

Your robot needs a complete and accurate map of your home, so if there

are any problems during mapping, it's better to start again.

Multiple floors

If your home has more than one floor level, you can create a map for each

storey or level of your home.

When you clean on a different level of your house, you’ll need to move your

robot’s dock to each level and start each mapping mission from the dock.

Check www.dyson.com for the option to purchase additional docks.

Unlock intelligent features with the MyDyson™app

Your robot works in tandem with the MyDyson™app to intelligently navigate

and deep clean your home. Easily connect to see where it’s cleaned, create

zones and customise your robot’s behaviour.

Creating a map of your home with the MyDyson™app lets your robot learn

the layout. This gives you more control over where and how your robot cleans

areas of your home.

Zoning your home

Adding restrictions

No climb

No brush bar

Avoid areas

Your robot will avoid climbing in areas where obstacles may cause it to get

stuck, such as furniture with pedestals or low level items.

Your robot will vacuum in this area with the brush bar turned off. This is useful

where there are delicate floors or long-pile rugs.

You can select areas on your map for your robot to avoid. This can be used in

areas with cables, clothing or toys, where your robot might get stuck. You can

also avoid entire rooms, such as the bathroom.

Customising cleans

Pick a zone or selection of zones to clean.

Choose a power mode for your selected zone.

Your robot will clean zones in the order that minimises the time

taken to complete the clean.

Once you’ve created a map, follow the instructions on the MyDyson™app to

create zones.

Divide your map into zones. Once you divide your map into different zones,

you can choose when and how each zone is cleaned.

Tap on the map to add zone dividers.

You may want to use room boundaries so that you can customise the clean

for each room.

Using the MyDyson™app, you can select areas that your robot needs to

avoid, turn off the brush bar or avoid climbing in that area.

Aerial view of zones showing

furniture and boundaries

Scheduling cleans

Reviewing cleans

Scheduling and reviewing cleans

Looking after your robot

Look after your robot

Look after your battery

Your machine won’t operate or charge if the ambient temperature is below

5°C (41°F). This is designed to protect both the motor and battery.

You'll need your serial number, located behind the bin.

For more information and support videos for your machine go online:

www.dyson.com/support

Check airways for blockages

Check your robot regularly for blockages in the airways. Remove the bin and

check for debris in the airway behind it.

Check brush bar for obstructions

Check the brush bar regularly and remove any threads, hair and any other

debris that may cause an obstruction.

Check wheels for obstructions

Turn your robot over on a soft surface to protect the lens. Check that

the wheels are clear of any threads, hair or other debris that may

cause an obstruction.

For optimum performance, regularly clean your robot and

check for obstructions.

Clean optics obstructions

Regularly check that your camera and sensors are clean and free from any

dirt or smears. Use a soft, dry, lint-free cloth to clean the optics.

Wash your filter

Wash your filter regularly and leave to dry completely.

Use the MyDyson™app to see a map of where your robot has cleaned.

Your robot will update its map at the end and periodically during a clean.

You can use the map to see where your robot has got stuck during a clean,

then use this as a guide to add restrictions.

Your map will indicate the levels of dust detected during the clean, you may

want to clean areas with higher dust more often.

If your robot is dusty, wipe with a dry lint-free cloth.

Don’t use detergents or polishes to clean your robot.

Keep your robot’s software up to date with the MyDyson™app.

Use the MyDyson™app to schedule cleans for times when you’re not at home,

or clean high traffic areas more frequently.

With the bin

removed, the

airway can be

found on the left

hand side of the

main body.

With the robot on its

back, look between

the roller bar and its

housing.

With the robot on

its back, check the

wheels located on

the bottom of the

robot, on either side.

With the robot

on its back, the

sensors can be

found on both

sides of the

bottom. There

are sensors on

the front corner

edge and two

pairs located

towards the bin.

Emptying your bin

Empty your bin as soon as the dirt reaches the MAX level

Remove your bin

Release the dirt

Close the bin

Cleaning your bin

Minimise dust contact

Push the bin base upwards until your bin and bin base click into place.

Push your bin back into place, make sure it clicks securely back into your robot.

Clik

Hold your bin over a rubbish container, pointing downwards.

Push the cyclone release button on the handle.

Your bin will slide down, cleaning the shroud as it goes, the bin base will

open, releasing the dirt.

Cover your bin tightly in a dustproof bag while you empty. Remove your bin

carefully, seal the bag tightly and dispose.

Press the bin removal catch on the top of your robot and lift your bin away.

Use the handle to carry your bin.

Your bin isn’t dishwasher safe and using detergents, polishes or air

fresheners to clean it isn’t recommended, as it could damage your robot.

Empty your bin and press the bin empty catch. This is located under the

cyclone, on the bin runner.

Slide your bin off the runner and put the cyclone to one side.

Only use a damp, lint-free cloth to clean your bin.

Make sure that your bin and seals are completely dry before replacing.

Push bin back into

place at the rear of

your machine until you

hear a click

With the handle lifted,

the cyclone release

button is located in the

middle of the handle.

The bin removal catch is

located behind the screen on

the top of the robot. This can

be pressed and the bin pulled

away from the main body.

Inhaltsverzeichnis

Andere Dyson Staubsauger Handbücher

Dyson

Dyson V7 Motorhead Bedienungsanleitung

Dyson

Dyson DC 33 C Bedienungsanleitung

Dyson

Dyson Ball DC25 Bedienungsanleitung

Dyson

Dyson Micro 1.5kg Bedienungsanleitung

Dyson

Dyson DC30 Bedienungsanleitung

Dyson

Dyson Cinetic Big Ball Bedienungsanleitung

Dyson

Dyson DC05 Bedienungsanleitung

Dyson

Dyson SV14 Absolute Bedienungsanleitung

Dyson

Dyson Cyclone V10 Bedienungsanleitung

Dyson

Dyson DC20 Bedienungsanleitung

Dyson

Dyson SV10 Bedienungsanleitung

Dyson

Dyson DC56 Bedienungsanleitung

Dyson

Dyson Cinetic big ball CY26 Bedienungsanleitung

Dyson

Dyson DC23 Turbinehead Bedienungsanleitung

Dyson

Dyson DC23 Turbinehead Bedienungsanleitung

Dyson

Dyson DC17 Absolute Bedienungsanleitung

Dyson

Dyson DC28 Bedienungsanleitung

Dyson

Dyson 360 Eye Betriebsanleitung

Dyson

Dyson DC24 Blueprint Limited Edition Bedienungsanleitung

Dyson

Dyson V7 Motorhead Bedienungsanleitung

Dyson

Dyson DC 24 ball Bedienungsanleitung

Dyson

Dyson Dc45 Bedienungsanleitung

Dyson

Dyson DC 31 Bedienungsanleitung

Dyson

Dyson DC39c Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung