Dyson Ball Animal Bedienungsanleitung

User manual

SV12 JN.00000 PN.000000-00-00

00.00.00 VERSION NO.01

In the box

Getting started

Assembling your machine

Caring for your floors

Using your Motorbar™cleaner head

Using your tools

Emptying your bin

Storing your machine

Clearing blockages

Clearing obstructions from your

Motorbar™cleaner head

Washing your filters

Looking after your machine

Dyson ball

animal logo

The Dyson upright

vacuum cleaner

front view with

the cleaner head,

ball, bin and

handle attached.

Captures loose hair

and dander as you

brush your pet. Flexible

bristles self-clean in an

instant.

Vacuum cleaner Wand

Handle

Motorbar™cleaner head

Some tools and accessories may not be included.

You can buy additional tools and accessories at www.dyson.com.

Combination tool

Two tools in one -

brush and nozzle,

for versatile cleaning

around your home.

Stair tool

For vacuuming narrow

or difficult-to-reach

carpeted areas, such

as stairs and corners.

Pet groom tool

Tangle-free

turbine tool

clik

Counter-rotating

brush heads remove

hair from carpets

and upholstery.

No tangles.

Fabric and

mattress tool

Removes dust,

dirt and allergens

from mattresses

and upholstery.

Articulating hard

floor tool

Swivelling brush head

with an ultra-slim

profile to reach difficult

spaces. With soft nylon

bristles to remove dust

and allergens.

Soft dusting brush

Enclosed in a skirt of

soft nylon bristles for

gentle, vacuum-assisted

dusting of delicate

objects and surfaces.

Tool holder

In the box

clik

The Dyson upright

vacuum cleaner with

bin attached.

A brush bar located inside

the cleaner head and

a suction control slider

located on the front. A plastic clip that

can be fitted behind

the bin to hold the

combination tool.

A small cleaner head

with a body housing the

motor and an electrical

connector to attach to

the wand or directly to

the machine.

This tool has

a combination

of brush head

and crevice tool

together in one

unit. The brush

head slides down

the crevice tool

when needed.

A wide mouth tool

with a lint edge.

Soft bristles are on the

underside of this tool. A wide, triangular

shaped nozzle.

A long rectangular

tool with a jointed

connection and

soft bristles on the

underside.

A spring-

loaded head

with metal

bristles on the

underside.

The handle supplied

separately, with

a triangular handle

grip and cable clip

on the front.

Getting started

Motorbar™cleaner head

De-tangling vanes automatically

clear wrapped hair from the

brush bar as you clean.

Brush bar control

Turn off the brush bar

for delicate floors or

deep pile rugs.

Ball technology

Easy to maneuver.

Steers around furniture

with a gentle turn of

the wrist.

The hose and wand

release in one action

for easy tool changes.

3 cleaning modes

Power button

Press the power button

to start cleaning.

Lean to clean

Lean handle back to start

a clean. Leave upright to

direct suction to the wand.

Adjust the slider for the right

suction for the right task: deep-

and medium-pile carpets, low-pile

carpets and large debris, and hard

floors and ground-in dirt.

High-reach wand with

quick release

The wand

or tools are

attached to the

end of the hose.

The suction

control slider

is located at

the front of the

cleaner head.

The ball

located

between the

bin and the

cleaner head.

Dyson cleaner head

containing a cylindrical

brush bar with slide bar on

the middle at the front is at

the base of the machine.

Two buttons are located between

the handle and the handle of the

bin. The brush bar control button

is on the left.

Hand holding handle

of the Dyson upright

vacuum cleaner.

Two buttons are located between the

handle and the handle of the bin.

The power button is on the right.

Fit the cleaner head

Assembling your machine

Lay your machine on its back.

Slide your Motorbar™cleaner head into position on the front of the ball.

Push upwards until the red button on the underside of your machine clicks

securely in place.

Stand your machine upright.

Fit the wand

Wrap the cable around the top and bottom cable hooks and secure with the

cable clip.

Fit the tool holder

Slide the tool holder into position on the side of your machine.

Fit your combination tool onto the holder.

Slide the handle onto your machine until it clicks into position.

Position the wand into the end of the hose. Press the wand release button on

the end of the hose and slide the wand all the way down.

Position the wand and hose in the handle recess on your machine. Slide the

wand down into the handle until it clicks into position.

Close the wand end cap.

click

clik

An arrow shows the

position in which the

cleaner head is placed.

An audible sound is

shown making a click.

An arrow shows the

wand being pushed

back into the handle.

The wand is

clicked back onto

the hose. And

pushed back into

the machine.

The tool holder

is attached to

the machine

just below the

handle.

A combination

tool is attached to

the tool holder.

Caring for your floors

Check that the underside of the cleaner head or tool is clean and free from

any objects that may cause damage.

Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s

recommended cleaning instructions.

The brush bar on your machine can damage certain flooring. Some rug

materials may fuzz if a rotating brush bar is used when vacuuming. If this

happens, we recommend vacuuming without the motorized floor tool and

consulting with your flooring manufacturer.

Using your Motorbar™cleaner head

Slide the suction control to suit your floor type. Select the right cleaning

mode for the right task.

Position the slider to the left for use on deep- to medium-pile carpets,

delicate flooring and rugs.

Position the slider in the center for low-pile carpets and large debris.

Position the slider to the right for hard floors and ground in dirt.

If your machine is hard to push, use the mode on the left.

clik

Your cleaner head has a motor-driven brush bar with suction control.

Check the manufacturer’s recommended cleaning instructions for your

flooring type.

Turn the brush bar on for

low pile carpets and turn

off for deep pile carpets

and delicate flooring.

The brush bar button

is on the left next to

the power button.

The suction control slider is located on

the front of the cleanerhead.

Using your tools

Open the cap on the handle and slide the wand upwards until both the wand

and hose release from the machine.

Push the tool into the end of the wand.

Remove from the wand

Open the cap on the handle and slide the wand upwards until both the wand

and hose release from the machine.

Press the button on the end of the hose to release the wand.

Fit the tool into the end of the hose.

Attach to the wand

Attach to the hose

clik

Remove the tool from the end of the hose.

Push the wand into the end of the hose until it clicks into position.

Slide the wand down into the hose.

Close the wand end cap.

Remove the tool and slide the wand back into the hose. Position the wand

and hose in the recess on the handle of your machine.

Remove from the hose

To use the

combination tool,

press the button on

the tool and slide

the brush down the

crevice tool.

Use the tools attached

to the wand or hose

to clean stairs with the

machine placed at the

bottom of the stairs.

Storing your machine

Carry your machine using the bin handle.

clik,

clik

Emptying your bin

Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your

machine when the dirt is above the MAX line may affect the performance

and require more frequent filter washing.

Release the dirt

Hold your bin, with the bin base pointing down, over your trash can.

Firmly push the button on the bin handle, until the bin base opens.

Remove your bin

Turn off and unplug your machine.

Press the button on the bin handle to detach the bin from your machine.

Replace your bin

Push your handle into the upright position.

Push your handle firmly forward and listen for two clicks to lock in

upright position.

The stabiliser wheels will drop into position when the handle is locked

in the upright position.

Minimize dust contact

Cover your bin tightly in a dustproof bag while you empty. Remove

your bin carefully, seal the bag tightly and dispose.

Push the bin base up until it closes, clicking into place.

Position the bottom of your bin on your vacuum cleaner and then push

the top into your machine until it clicks securely into place.

There is a max

level located

approximately

half way up the

bin.

The bin release button is

located on the handle of

the bin.

Clearing blockages

Check the wand

Open the cap on the handle and slide the wand upwards until both the wand

and hose release from the machine.

Press the button on the end of the hose to release the wand.

Look through the wand to check for blockages.

Open the cap on the handle and slide the wand upwards until both the wand

and hose release from the machine.

Press the button on the end of the hose and remove the wand.

Press the button on the bin handle and remove the bin. Press the tab on the

base of the hose to remove it from your machine.

Check for blockages in the hose, be careful of any sharp objects.

Check airways for blockages

Recline your machine and remove the outer cover of the ball.

Press the button on the handle of the bin and lift it away from your

machine. Locate the clear inspection panel at the bottom of the bin recess

on your machine and lift it to one side. Remove any debris.

Remove the cleaner head and look for blockages in the airway.

Check all the airways, removing any debris before reassembling your

machine.

Check the hose

Remove cleaner head

If any part of your machine becomes blocked, it may automatically cut out

and the power will stop.

Unplug and leave your machine to cool before checking for blockages.

Lay your machine on its back.

Push down the red button on the bottom of the ball and then slide your

cleaner head down and off your machine.

You should check for blockages

in a number of locations on

your machine, the wand and

hose and the cleaner head and

airways.

The cuff is located

at the back of

the machine, just

above the ball.

Press down on

the top of the

button to release

the cleaner head.

Pull the cleaner

head upwards to

remove it from your

machine.

The button to

release the cleaner

head is located

at the back of the

machine between

the ball and

cleaner head.

Clearing obstructions from your

Motorbar™cleaner head

Remove cleaner head

Your Motorbar™cleaner head doesn’t have a washable brush bar.

To maintain optimum performance, check your brush bar regularly

and clear any obstructions.

Unplug and leave your machine to cool before checking for blockages.

Press the button on the back of the Motorbar™cleaner head and push

upwards 90°to release the end cap.

Pull the brush bar out of the cleaner head.

Remove any hair, thread or debris from around the brush bar.

Be careful of any sharp objects when clearing blockages.

Remove your brush bar

Replace your brush bar

Reassemble the cleaner head

Push the brush bar firmly back into the cleaner head.

Make sure the brush bar is pushed fully into the cleaner head. Rotate the end

cap until it clicks back into the locked position.

Slide your Motorbar™cleaner head into position on the front of the ball. Push

upwards until the red button on the underside of your machine clicks securely

in place.

Lie your machine on its back.

Push down the red button on the bottom of the ball and then slide your

cleaner head down and off your machine.

Press down on

the top of the

button to release

the cleaner head.

Pull the cleaner

head upwards to

remove it from your

machine.

The button to

release the cleaner

head is located

at the back of the

machine between

the ball and

cleaner head.

The brush bar release button

is located at the back of the

cleaner head.

Washing your filters

Washing filter A

For more information and support videos for your machine go online:

www.dyson.com/support

Wash your filters at least once a month to maintain optimum suction power.

Remove your filter

Reassemble your filter

Dry your filter

Wash your filter

Press the button on the bin handle to detach the bin from your machine.

Drop your filter back into your machine. Close the handle and make sure it

clips into place.

Place the base of your bin onto your machine and then push the top into

position until it clicks.

Squeeze the excess water out of your filter.

Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.

Don’t dry your filter in a tumble dryer, microwave or near a naked flame.

Important: your filter must be completely dry before you put it back into the

machine. Your machine could be damaged if used with a damp filter.

Push up the catch on the front of the bin handle and lift out the filter.

Only wash the filter with cold water. Hold the open end of the filter under

a running tap, until the water runs clear.

Turn the filter upside down and tap to remove excess water.

Run water over the outside of the filter until the water runs clear.

Squeeze and twist with both hands to make sure the excess water is removed.

clik

The clip to open the top of

the cyclone can be found

where the bin handle joins

the cyclone.

With the handle

lifted up, the

filter can be

located in the

center of the

cyclone unit.

The filter should be dropped

back into the center of the

cyclone unit and the handle

pushed down into position with

a click.

Remove the

plug from the

power source.

Andere Handbücher für Ball Animal

Inhaltsverzeichnis

Andere Dyson Staubsauger Handbücher

Dyson

Dyson V7 Motorhead Bedienungsanleitung

Dyson

Dyson SV15 Bedienungsanleitung

Dyson

Dyson light ball UP16 Bedienungsanleitung

Dyson

Dyson V11 Bedienungsanleitung

Dyson

Dyson Outsize Bedienungsanleitung

Dyson

Dyson V6 Absolute Bedienungsanleitung

Dyson

Dyson DC32 Bedienungsanleitung

Dyson

Dyson Cinetic big ball CY26 Bedienungsanleitung

Dyson

Dyson DC23 T2 Bedienungsanleitung

Dyson

Dyson Dc45 Bedienungsanleitung

Dyson

Dyson DC37 Bedienungsanleitung

Dyson

Dyson Cyclone V10 Bedienungsanleitung

Dyson

Dyson DC29dB Bedienungsanleitung

Dyson

Dyson DC 41 Animal Complete Bedienungsanleitung

Dyson

Dyson Cinetic Big Ball Gebrauchsanweisung

Dyson

Dyson Cyclone V10 Bedienungsanleitung

Dyson

Dyson DC 23 Bedienungsanleitung

Dyson

Dyson DC30 Bedienungsanleitung

Dyson

Dyson V6 Absolute Bedienungsanleitung

Dyson

Dyson DC31 Bedienungsanleitung

Dyson

Dyson V6 Absolute Bedienungsanleitung

Dyson

Dyson DC23 Motorhead Bedienungsanleitung

Dyson

Dyson DC23 ANIMAL Bedienungsanleitung

Dyson

Dyson v6 total clean Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch