Dyson Ball Animal Bedienungsanleitung

User manual

SV12 JN.00000 PN.000000-00-00

00.00.00 VERSION NO.01

In the box

Getting started

Assembling your machine

Caring for your floors

Using your Motorbar™ cleaner head

Using your tools

Emptying your bin

Storing your machine

Clearing blockages

Clearing obstructions from your

Motorbar™ cleaner head

Washing your filters

Looking after your machine

In the box

Some tools and accessories may not be included.

You can buy additional tools and accessories at www.dyson.com.

Combination tool

Two tools in one -

brush and nozzle,

for versatile cleaning

around your home.

Stair tool

For vacuuming narrow

or difficult-to-reach

carpeted areas, such

as stairs and corners.

Wand

Vacuum cleaner

Motorbar™ cleaner head

Fabric and

mattress tool

Removes dust,

dirt and allergens

from mattresses

and upholstery.

Soft dusting brush

Enclosed in a skirt

of soft nylon bristles

for gentle, vacuum-

assisted dusting of

delicate objects and

surfaces.

Tangle-free

turbine tool

Only Dyson uses

counter-rotating heads

to remove hair from

carpets and upholstery

with no tangles.

Getting started

High reach wand

with quick release

The hose and wand

release in one action

for easy tool changes.

Motorbar™ cleaner head

De-tangling vanes automatically

clear wrapped hair from the

brush bar as you clean.

Ball technology

Easy to manoeuvre.

Steers around furniture

with a gentle turn of

the wrist.

Brush bar control

Turn off the brush bar

for delicate floors or

deep pile rugs.

clik

Power button

Press the power button

to start cleaning.

Lean to clean

Lean handle back to start

a clean. Leave upright to

direct suction to the wand.

Variable suction control

Adjust the slider for the right

suction for the right task: deep-

and medium-pile carpets, low-pile

carpets and large debris, and hard

floors and ground-in dirt.

click

Fit the cleaner head

Fit the wand

Wrap the cable around the top and bottom cable hooks and secure

with the cable clip.

Fit the tool holder

Slide the tool holder into position on the side of your machine.

Fit your combination tool onto the holder.

Push the wand into the end of the hose until it clicks into position.

Slide the handle onto the top of your machine.

Slide the wand down into the hose.

Close the wand end cap.

Assembling your machine

Fit the Tangle-free turbine tool holder (optional)

If your machine is supplied with a Tangle-free turbine tool holder,

clip this to the front of the handle, just above the power button.

click

Lie your machine on its back.

Slide your Motorbar™ cleaner head into position on the front of the ball.

Push upwards until the red button on the underside of your machine clicks

securely in place.

Stand your machine upright.

Caring for your floors

Using your Motorbar™ cleaner head

clik

Check that the underside of the cleaner head or tool is clean and free from

any objects that may cause damage.

Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s

recommended cleaning instructions.

The brush bar on your machine can damage certain flooring. Some rug

materials may fuzz if a rotating brush bar is used when vacuuming. If this

happens, we recommend vacuuming without the motorised floor tool and

consulting with your flooring manufacturer.

Slide the suction control to suit your floor type. Select the right cleaning

mode for the right task.

Position the slider to the left for use on deep- to medium-pile carpets,

delicate flooring and rugs.

Position the slider in the center for low-pile carpets and large debris.

Position the slider to the right for hard floors and ground in dirt.

Your cleaner head has a motor-driven brush bar with suction control.

Check the manufacturer’s recommended cleaning instructions for your

flooring type.

clik

Using your tools

Open the cap on the handle and slide the wand upwards until both the wand

and hose release from the machine.

Push the tool into the end of the wand.

Attach to the wand

Attach to the hose

Remove from the hose

Open the cap on the handle and slide the wand upwards until both the wand

and hose release from the machine.

Press the button on the end of the hose to release the wand.

Fit the tool into the end of the hose.

Remove the tool from the end of the hose.

Push the wand into the end of the hose until it clicks into position.

Slide the handle onto the top of your machine.

Slide the wand down into the hose.

Close the wand end cap.

Remove the tool from the wand

Remove the tool from the end of the wand.

Slide the handle onto the top of your machine.

Slide the wand down into the hose.

Close the wand cap.

Emptying your bin

Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your

machine when the dirt is above the MAX line may affect the performance

and require more frequent filter washing.

Release the dirt

Hold your bin, with the bin base pointing down, over your rubbish container.

Firmly push the button on the bin handle, until the bin base opens.

Remove your bin

Minimise dust contact

Cover your bin tightly in a dust proof bag while you empty. Remove your bin

carefully, seal the bag tightly and dispose.

Refit your bin

Push the bin base up until it closes, clicking into place.

Position the bottom of your bin in position and then push the top into your

machine until it clicks securely into place.

Carry your machine using the bin handle.

Storing your machine

Turn off and unplug your machine.

Press the button on the bin handle to detach the bin from your machine.

Push your handle into the upright position.

Push your handle firmly forward and listen for two clicks to lock in

upright position.

The stabiliser wheels will drop into position when the handle is locked

in the upright position.

clik

Clearing blockages

Check the wand

Open the cap on the handle and slide the wand upwards until both the wand

and hose release from the machine.

Press the button on the end of the hose and remove the wand.

Press the button on the bin handle and remove the bin. Press the tab on the

base of the hose to remove it from your machine.

Check for blockages in the hose, be careful of any sharp objects.

Check the hose

Open the cap on the handle and slide the wand upwards until both the wand

and hose release from the machine.

Press the button on the end of the hose to release the wand.

Look through the wand to check for blockages.

Remove cleaner head

Check airways for blockages

Recline your machine and remove the outer cover of the ball.

Remove the cross-head screw and unhook the plastic access cover.

Check the airway for any blockages.

Replace the plastic cover by hooking it back into the slot and pushing

it towards the filter. Fasten the cross-head screw and replace the outer

cover on the ball.

Reassemble your machine

Follow the assembly instructions to reassemble your machine.

1 2 3

8 9

5 6 7

If any part of your machine becomes blocked, it may automatically cut out

and the power will stop.

Unplug and leave your machine to cool before checking for blockages.

Lie your machine on its front.

Push down the red button on the bottom of the ball and then slide your

cleaner head down and off your machine.

Clearing obstructions from your

Motorbar™ cleaner head

Your Motorbar™ cleaner head doesn't have a washable brush bar.

To maintain optimum performance, check your brush bar regularly

and clear any obstructions.

Unplug and leave your machine to cool before checking for blockages.

Replace your brush bar

Fit the cleaner head

Push the brush bar firmly back into the cleaner head.

Make sure the brush bar is pushed fully into the cleaner head. Rotate the end

cap until it clicks back into the locked position.

Slide your Motorbar™ cleaner head into position on the front of the ball.

Push upwards until the red button on the underside of your machine clicks

securely in place.

Remove your brush bar

Remove cleaner head

Lie your machine on its back.

Push down the red button on the bottom of the ball and then slide your

cleaner head down and off your machine.

Press the button on the back of the Motorbar™ cleaner head and push upwards

90° to release the end cap.

Pull the brush bar out of the cleaner head.

Remove debris from around the brush bar.

Be careful of any sharp objects when clearing blockages.

Washing your filters

Washing filter A

For more information and support videos for your machine go online:

www.dyson.com/support

Wash your filters at least once a month to maintain optimum suction power.

Remove your filter

Refit your filter

Dry your filter

Wash your filter

Drop your filter back into your machine. Close the handle and make sure it

clips into place.

Place the base of your bin onto your machine and then push the top into

position until it clicks.

Squeeze the excess water out of your filter.

Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.

Don’t dry your filter in a tumble dryer, microwave or near a naked flame.

Important: your filter must be completely dry before you put it back into the

machine. Your machine could be damaged if used with a damp filter.

click

Press the button on the bin handle to detach the bin from your machine.

Push up the catch on the front of the bin handle and lift out the filter.

Only wash the filter with cold water. Hold the open end of the filter under a

running tap, until the water runs clear.

Turn the filter upside down and tap it to remove excess water.

Run water over the outside of the filter until the water runs clear.

Squeeze and twist with both hands to make sure the excess water is removed.

Andere Handbücher für Ball Animal

Inhaltsverzeichnis

Andere Dyson Staubsauger Handbücher

Dyson

Dyson DC21 Motorhead Bedienungsanleitung

Dyson

Dyson DC14 Telescope Reach Bedienungsanleitung

Dyson

Dyson DC03 Bedienungsanleitung

Dyson

Dyson SV05 Bedienungsanleitung

Dyson

Dyson V7 Cord Free Bedienungsanleitung

Dyson

Dyson DC20 Bedienungsanleitung

Dyson

Dyson DC 65 Bedienungsanleitung

Dyson

Dyson DC02 Bedienungsanleitung

Dyson

Dyson DCo7 Bedienungsanleitung

Dyson

Dyson DC27 Bedienungsanleitung

Dyson

Dyson DC14 Telescope Reach Bedienungsanleitung

Dyson

Dyson V11 Bedienungsanleitung

Dyson

Dyson DC29 dB Bedienungsanleitung

Dyson

Dyson DC07 All Floors Bedienungsanleitung

Dyson

Dyson DC19 Bedienungsanleitung

Dyson

Dyson HH11 Bedienungsanleitung

Dyson

Dyson DC 22 Bedienungsanleitung

Dyson

Dyson DC35 MULTI FLOOR Bedienungsanleitung

Dyson

Dyson DC17 Asthma and Allergy Bedienungsanleitung

Dyson

Dyson DC 41 Animal Complete Bedienungsanleitung

Dyson

Dyson Slim DC18 Bedienungsanleitung

Dyson

Dyson DC47 Bedienungsanleitung

Dyson

Dyson DC40 Bedienungsanleitung

Dyson

Dyson DC 22 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch