Eaton Powerware 9140 Bedienungsanleitung

Powerware 9140 UPS

7.5–10 kVA

User’s Guide

Powerware 9140 UPS

7.5–10 kVA

User’s Guide

Class A EMC Statements

FCC Part 15

NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

ICES-003

This Class A Interference Causing Equipment meets all requirements of the Canadian Interference Causing

Equipment Regulations ICES-003.

Cet appareil numérique de la classe A respecte toutes les exigences du Reglement sur le matériel brouilleur du

Canada.

EN 50091-2

Some configurations are classified under EN 50091-2 as “Class-A UPS for Unrestricted Sales Distribution.” For

these configurations, the following applies:

WARNING This is a Class A-UPS Product. In a domestic environment, this product may cause radio interference, in

which case, the user may be required to take additional measures.

Powerware, ABM, X-Slot, LanSafe, and FERRUPS are registered trademarks and ConnectUPS is a trademark of

Eaton Electrical Inc. Greenlee is a registered trademark of Greenlee Textron. Modbus is a registered trademark of

Modicon. Microsoft and Windows are registered trademarks of Microsoft Corporation.

reproduced in any way without the express written approval of Eaton Corporation.

Requesting a Declaration of Conformity

Units that are labeled with a CE mark comply with the following harmonized standards and EU directives:

SHarmonized Standards: IEC 61000-3-12

SEU Directives: 73/23/EEC, Council Directive on equipment designed for use within certain voltage limits

93/68/EEC, Amending Directive 73/23/EEC

89/336/EEC, Council Directive relating to electromagnetic compatibility

92/31/EEC, Amending Directive 89/336/EEC relating to EMC

The EC Declaration of Conformity is available upon request for products with a CE mark. For copies of the EC

Declaration of Conformity, contact:

Eaton Power Quality Oy

Koskelontie 13

FIN-02920 Espoo

Finland

Phone: +358-9-452 661

Fax: +358-9-452 665 68

Special Symbols

The following are examples of symbols used on the UPS or accessories to alert you to important

information:

RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is present and the

associated warning should be observed.

CAUTION: REFER TO OPERATOR’S MANUAL - Refer to your operator’s manual for

additional information, such as important operating and maintenance

instructions.

This symbol indicates that you should not discard the UPS or the UPS batteries

in the trash. This product contains sealed, lead-acid batteries and must be

disposed of properly. For more information, contact your local recycling/reuse or

hazardous waste center.

This symbol indicates that you should not discard waste electrical or electronic

equipment (WEEE) in the trash. For proper disposal, contact your local

recycling/reuse or hazardous waste center.

EATON Powerware®9140 UPS (7.5–10 kVA) User’s Guide S164201622 Rev A FINAL DRAFT 14-Jul-2006 i

Table of Contents

1 Introduction 1.........................................................

2 Safety Warnings 3.....................................................

3 Installation 19..........................................................

Inspecting the Equipment 19................................................................

Unpacking the Cabinet 20..................................................................

EBM Setup 21..........................................................................

Checking the EBM Accessory Kit 21........................................................

Rack Setup for the EBM 22..............................................................

Installing the EBM Batteries 28...........................................................

UPS Setup 30..........................................................................

Checking the UPS Accessory Kit 30........................................................

Rack Setup for the UPS 31...............................................................

Installing the UPS Internal Batteries 39.....................................................

EBM Installation 40......................................................................

UPS Installation 42......................................................................

Plug-Receptacle UPS Installation 42........................................................

Hardwired UPS Installation 46............................................................

REPO and ROO Installation 54...............................................................

4 Operation 57...........................................................

Control Panel Functions 57.................................................................

Changing the Language 58..............................................................

Display Functions 59...................................................................

User Settings 60......................................................................

Operating Modes 62.....................................................................

Normal Mode 62.....................................................................

Battery Mode 62.....................................................................

Bypass Mode 63......................................................................

Standby Mode 63.....................................................................

UPS Startup and Shutdown 64..............................................................

Normal Mode Startup 64................................................................

Starting the UPS on Battery 65...........................................................

Internal Bypass Startup 65..............................................................

UPS Shutdown 66.....................................................................

TABLE OF CONTENTS

EATON Powerware®9140 UPS (7.5–10 kVA) User’s Guide S164201622 Rev A FINAL DRAFT 14-Jul-2006

Configuring the UPS for EBMs 67............................................................

Initiating the Battery Test 67................................................................

Transferring the UPS Between Modes 68.......................................................

5 Communication 69......................................................

USB Port 70............................................................................

Remote Emergency Power-off and Remote On/Off 70..............................................

DB-9 Communication Ports 72...............................................................

X-Slot Cards 73.........................................................................

Powerware LanSafe Power Management Software 74.............................................

6 UPS Maintenance 75....................................................

UPS and Battery Care 75..................................................................

Storing the UPS and Batteries 75............................................................

When to Replace Batteries 76...............................................................

Replacing Batteries 76....................................................................

How to Replace EBM Batteries 77.........................................................

How to Replace UPS Internal Batteries 79...................................................

Testing New Batteries 81..................................................................

Replacing the Electronics Module 81..........................................................

Recycling the Used Battery or UPS 84.........................................................

7 Specifications 85.......................................................

8 Troubleshooting 89......................................................

Typical Alarms and Conditions 89............................................................

Silencing the Alarm 92....................................................................

Service and Support 92...................................................................

9 Warranty 93...........................................................

Two-Year Limited Warranty (US and Canada) 93..................................................

Ten-Year Pro-Rated Limited Warranty (US and Canada) 95..........................................

Load Protection Guarantee (US and Canada) 97..................................................

EATON Powerware®9140 UPS (7.5–10 kVA) User’s Guide S164201622 Rev A FINAL DRAFT 14-Jul-2006 1

Chapter 1 Introduction

The Powerware®9140 uninterruptible power system (UPS) protects your

sensitive electronic equipment from the most common power problems

including power failures, power sags, power surges, brownouts, line

noise, high voltage spikes, frequency variations, switching transients,

and harmonic distortion.

Power outages can occur when you least expect it and power

quality can be erratic. These power problems have the potential to

corrupt critical data, destroy unsaved work sessions, and damage

hardware — causing hours of lost productivity and expensive repairs.

With the Powerware 9140, you can safely eliminate the effects of power

disturbances and guard the integrity of your equipment. Figure 1 shows

the Powerware 9140 UPS with an optional Extended Battery Module

(EBM).

UPS

EBM

Figure 1. The Powerware 9140 UPS with Optional EBM

INTRODUCTION

EATON Powerware®9140 UPS (7.5–10 kVA) User’s Guide S164201622 Rev A FINAL DRAFT 14-Jul-2006

Providing outstanding performance and reliability, the Powerware 9140’s

unique benefits include the following:

SOnline, double-conversion, high-frequency UPS design with pure sine

wave output and power-factor correction. The UPS filters and

regulates incoming AC power and provides consistent power to your

equipment without draining the battery.

SFor hardwired models, choice of operation mode between

single-phase input mode and three-phase input mode.

S6U rack height with the highest power density for a 10000 VA UPS.

SABM®technology that uses advanced battery management to

increase battery service life, optimize recharge time, and provide a

warning before the end of useful battery life.

SExtended runtime with up to four EBMs.

SStart-on-battery capability for powering up the UPS even if utility

power is not available.

SEasily replaceable electronics module and batteries that simplify

maintenance by allowing you to replace them safely without

powering down the critical load.

SEmergency shutdown control through the remote emergency

power-off (REPO) port, or the option to configure the REPO port as a

remote on/off (ROO) function.

STwo standard communication options with a USB port and two DB-9

serial ports (one DB-9 port is reserved for service use).

SOptional X-Slot®cards with enhanced communication capabilities for

increased power protection and control.

SFirmware that is service upgradable through the X-Slot or DB-9 ports.

SAdvanced power management with the Software Suite CD for

graceful shutdowns and power monitoring.

SBacked by worldwide agency approvals.

Andere Handbücher für Powerware 9140

Inhaltsverzeichnis

Andere Eaton UPS Handbücher

Eaton

Eaton 350 VA Bedienungsanleitung

Eaton

Eaton Powerware 9125 Bedienungsanleitung

Eaton

Eaton DX RT 6K UPS Bedienungsanleitung

Eaton

Eaton 5SC 500i Bedienungsanleitung

Eaton

Eaton Powerware 9125 Bedienungsanleitung

Eaton

Eaton Eaton 5PX Bedienungsanleitung

Eaton

Eaton 93PM 150 kW SIAC-B Three-Wire Bedienungsanleitung

Eaton

Eaton Power Xpert PXGX Programmierhandbuch

Eaton

Eaton Ellipse PRO 850 Bedienungsanleitung

Eaton

Eaton 700VA Betriebsanleitung

Eaton

Eaton Tripp Lite SmartPro Series Montageanleitung

Eaton

Eaton Nova AVR 500 Bedienungsanleitung

Eaton

Eaton Power Xpert 9395 Betriebsanleitung

Eaton

Eaton Power Xpert 9395P-600/600 Bedienungsanleitung

Eaton

Eaton 5E700UD-KR Montageanleitung

Eaton

Eaton 93PM IBC-L Bedienungsanleitung

Eaton

Eaton 3S Bedienungsanleitung

Eaton

Eaton 5E650iUSB-AU Bedienungsanleitung

Eaton

Eaton Powerware 5125 Bedienungsanleitung

Eaton

Eaton Powerware 5130 Bedienungsanleitung

Eaton

Eaton Powerware 9170+ Bedienungsanleitung

Eaton

Eaton 93PM IBC-L Handbuch

Eaton

Eaton 9135 Two-in-One UPS 5000/6000 VA Bedienungsanleitung

Eaton

Eaton 91PS Handbuch

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung