Edelbrock 2 & 4 W/D Bedienungsanleitung

Brochure #63-0368

Rev. 11/05 - DA/mc

Page 1of 2

Catalog #5710

Edelbrock Cat-back Exhaust System

Catalog #5710

Applications: 1999-2006 1500/2500 Standard Cab,

Short Bed Pick-Up, 4.8L & 5.3L V8, 2 & 4 W/D

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Cat-back Exhaust System. If you have any questions,

contact our Technical Hotline at: 1-800-416-8628, 7am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at

[email protected].

Suggested Tools for Installation:

❑3/8" ratchet set with SAE and metric sockets

❑9/16” & 15mm wrench

❑Jackstands and jack

❑Liquid penetrant and rubber lubricant

DISASSEMBLY

1. Raise vehicle and support with proper jackstands for

the weight, leaving the suspension hanging.

2. Use caution around hot exhaust systems to avoid

burns.

3. Use penetrating oil on all nuts and bolts.

Note: Some 2001 and newer GM Trucks have a

brace bar attached to the left and right side frame

rails. Remove bolt and swing bar out of the way

during installation.

4. Remove the bolts and clamps from the system and

lubricate the rubber hangers.

5. Use a long pry bar to pull the rubber hangers off of

the pipe hangers.

6. Remove the old system. In some cases, you will find

it easier to cut the overaxle pipe to remove it.

ASSEMBLY

1. Bolt I-Pipe to factory outlet flange (behind catalytic

converters). Make sure that you have engaged the

stock rubber hanger with the wire hanger welded to

the pipe.

Note: Do not tighten flange bolts at this time,(snug

only).

2. Slip the muffler onto the intermediate pipe with a

3-1/2" band clamp on the front. Note: Inlet end of

muffler is marked. Snug the clamp so you can adjust

the system later.

3. Install a 3-1/2" band clamp on the front of the

overaxle pipe and engage it into the stock rubber

hanger as you slip it into the muffler. Snug the

clamps.

4. Provided in the installation kit are 2 hanger clamp

assemblies. Using the correct one for the year of

your vehicle, slip the clamp over the outlet of the

overaxle pipe and engage into the rubber hanger

#23-4041 for 1999-2002, and #23-4042 for 2003-

2006 model year.

5. Slip tailpipe onto overaxle pipe, and snug the hanger

clamp.

6. Working from the front of the system, align and

tighten each pipe from the cat-back.

7. Check for clearance to body, frame, and driveline as

you tighten the system from front to rear.

8. Re-attach the brace bar to frame rail (if equipped).

9. Check for leaks and correct, if any is found.

WARNING!!!

Exhaust gas contains carbon monoxide, a deadly invisible gas. Correct any leaks before driving!

Brochure #63-0368

Rev. 11/05 - DA/mc

Page 2of 2

Catalog #5710

KIT CONTENTS

Catalog #5710

Qty. Part # Description

125-3171 I-Pipe

125-3166 Overaxle Pipe

125-3157 Tail Pipe

125-55726 Muffler

246-6613 3-1/2” Band Clamps

123-4041 Hanger/Clamp (1999-2002)

123-4042 Hanger/Clamp (2003-2006)

WARNING: Support your vehicle with proper

jackstands or ramps rated for the total vehicle weight.

Place stands so that the rear axle is allowed to hang

free for easy system removal.

WARNING: These cat-back systems are engineered

to fit stock catalytic converters or equivalent

replacements. If you original system has been

modified, Edelbrock will not warranty fit or

performance.

Intermediate Pipe Assembly

Overaxle Pipe Assembly

Tailpipe Assembly

Edelbrock Corporation

2700 California St.

Torrance, CA 90503

Tech Line: (800) 416-8628

Tech Fax: (310) 972-2730

E-Mail: [email protected]

Hanger Clamp

Band Clamp Band Clamp

Dieses Handbuch passt für folgende Modelle

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock Quiet-Flo 1790 Bedienungsanleitung

Edelbrock

Edelbrock 5262 Bedienungsanleitung

Edelbrock

Edelbrock 71852 Bedienungsanleitung

Edelbrock

Edelbrock 72700 Bedienungsanleitung

Edelbrock

Edelbrock 2832 Bedienungsanleitung

Edelbrock

Edelbrock 65272 Bedienungsanleitung

Edelbrock

Edelbrock 6601 Bedienungsanleitung

Edelbrock

Edelbrock Russell 694300 Bedienungsanleitung

Edelbrock

Edelbrock 70028 Bedienungsanleitung

Edelbrock

Edelbrock Russell 694540 Bedienungsanleitung

Edelbrock

Edelbrock 72961 Bedienungsanleitung

Edelbrock

Edelbrock Performer RPM 1967 Bedienungsanleitung

Edelbrock

Edelbrock 5752 Bedienungsanleitung

Edelbrock

Edelbrock 2001 PT Cruiser Bedienungsanleitung

Edelbrock

Edelbrock Russell DOT R08463S Bedienungsanleitung

Edelbrock

Edelbrock 66182 Bedienungsanleitung

Edelbrock

Edelbrock 68832 (Ceramic-Coated) Bedienungsanleitung

Edelbrock

Edelbrock Victor 77459 Bedienungsanleitung

Edelbrock

Edelbrock 66042 Bedienungsanleitung

Edelbrock

Edelbrock 33505 Bedienungsanleitung

Edelbrock

Edelbrock 3864 Bedienungsanleitung

Edelbrock

Edelbrock 73827 Bedienungsanleitung

Edelbrock

Edelbrock Honda TRX300EX Betriebsanleitung

Edelbrock

Edelbrock 72279 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung