Edelbrock 68003 Bedienungsanleitung

Brochure #63-68003

Rev. 5/06 - DA/mc

Catalog #68003

Cross-Over Pipe for Lowered Trucks

Vehicle Applications: See Below

Catalog #68003

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Cross-Over Pipe for lowered trucks. If you have any questions,

contact our Technical Hotline at: 1-800-416-8628 , 7am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at

[email protected]. Please fill out and mail your warranty card.

Cross-Over Pipe for Lowered Trucks: This component is designed to replace the stock cross-over pipe and give an additional

1-5/8” ground clearance on lowered Chevrolet/GMC trucks and Suburbans. This system requires no welding for installation and

retains all O.E.M. emissions equipment.

Applications: 1988-1992 Chev./GMC Pick-Up Trucks, 1500/2500 Series, 4.3L V6, 5.0L/5.7L V8 T.B.I., 2 WD, Automatic Trans.

1993 Chev./GMC Pick-Up Trucks, 2500 Series, 4.3L V6, 5.0L/5.7L V8 T.B.I., 2 WD, Automatic Trans.

1992-1993 Suburbans, 1500/2500 Series, 5.7L V8 T.B.I., 2WD, Automatic Trans.

DISASSEMBLY

1. Disconnect negative battery cable.

2. Raise vehicle and support with jackstands.

3. Use penetrating oil on all nuts and bolts to be

removed. This will prevent the possibility of broken

or stipped nuts and bolts.

4. Making sure the converter is cool, remove the

exhaust crossover pipe.

CROSS-OVER PIPE ASSEMBLY

1. Select the correct adapter tube for your catalytic

converter (small diameter for 4.3L & 5.0L and large

diameter for 5.7L engine).

INSTALLATION INSTRUCTIONS

Suggested Tools for Installation:

❑3/8” ratchet socket set with extensions and universal

13mm and 15mm swivel sockets

❑Combination set of open-end wrenches

❑Jackstands, screwdrivers, pliers, crescent wrench, etc.

❑Liquid penetrant (GM #1052627), anti-seize compound

(GM #5613695)

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may result in

poor performance and engine or vehicle damage.

2. Carefully align and tap adapter tube into converter

using a piece of wood or a mallet to protect the end

of the adapter.

NOTE: Be sure adapter goes all the way in,

approximately 2-1/2”.

3. Install crossover pipe assembly on vehicle using

OEM nuts and donut gaskets.

4. Install U-clamps and tighten all nuts.

5. Lower vehicle to ground and re-connect battery.

Start engine and bring to operating temperature,

checking for any leaks. Turn off engine and let cool,

then re-tighten all connections.

KIT CONTENTS

Qty.Description

❑1 Cross-Over Pipe Assembly

❑1 Adapter; catalytic converter (4.3L & 5.0L engine)

❑1 Adapter; catalytic converter (5.7L engine)

❑1 U-clamp; 3”

WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your cross-over

pipe. Those products can cause excessive heat and moisture buildup resulting in corrosion and early failure of the

system.

Edelbrock Corporation, 2700 California St., Torrance, CA 90503

Tech Line: (800) 416-8628

Office: (310) 781-2222

E-Mail: [email protected]

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 33505 Bedienungsanleitung

Edelbrock

Edelbrock 1926 Bedienungsanleitung

Edelbrock

Edelbrock 15004 Bedienungsanleitung

Edelbrock

Edelbrock 66013 Bedienungsanleitung

Edelbrock

Edelbrock Nitrous System 63-71940 Bedienungsanleitung

Edelbrock

Edelbrock Performer 1670 Bedienungsanleitung

Edelbrock

Edelbrock 1727 Bedienungsanleitung

Edelbrock

Edelbrock 3722 Bedienungsanleitung

Edelbrock

Edelbrock Cat-Back Exhaust System 5714 Bedienungsanleitung

Edelbrock

Edelbrock 5726 Bedienungsanleitung

Edelbrock

Edelbrock 5683 Bedienungsanleitung

Edelbrock

Edelbrock Chevrolet/GMC Trucks 454 SS Bedienungsanleitung

Edelbrock

Edelbrock 71850 Bedienungsanleitung

Edelbrock

Edelbrock 6607 Bedienungsanleitung

Edelbrock

Edelbrock Chevrolet 1500-6500 Bedienungsanleitung

Edelbrock

Edelbrock Russell R08364 Bedienungsanleitung

Edelbrock

Edelbrock 71883 Bedienungsanleitung

Edelbrock

Edelbrock 5682 Bedienungsanleitung

Edelbrock

Edelbrock 6560 Bedienungsanleitung

Edelbrock

Edelbrock Russell 641550 Bedienungsanleitung

Edelbrock

Edelbrock Ford Mustang 3381 Bedienungsanleitung

Edelbrock

Edelbrock 15002 Bedienungsanleitung

Edelbrock

Edelbrock 541583 Bedienungsanleitung

Edelbrock

Edelbrock 2281 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung