Edimax BR-6004 Bedienungsanleitung

4 Port Switch

Broadband Router

BR-6004

User’s Manual

Broadband Router

-1-

The contents of this publication may not be reproduced in any part or as a whole, stored,

transcribed in an information retrieval system, translated into any language, or transmitted

in any form or by any means, mechanical, magnetic, electronic, optical, photocopying,

manual, or otherwise, without the prior written permission.

Trademarks

All product, company, brand names are trademarks or registered trademarks of their

respective companies. They are used for identification purpose only. Specifications are

subject to be changed without prior notice.

-2-

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against radio interference in a commercial environment. This

equipment can generate, use and radiate radio frequency energy and, if not installed and

used in accordance with the instructions in this manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause

interference, in which case the user, at his own expense, will be required to take whatever

measures are necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic compatibility,

EN 55022/A1 Class B, and EN 50082-1. This meets the essential protection requirements

of the European Council Directive 89/336/EEC on the approximation of the laws of the

member states relation to electromagnetic compatibility.

-3-

Table of Contents

Chapter 1 Introduction...........................................................................4

1.1 Functions and Features................................................................4

1.2 Packing List................................................................................5

Chapter 2 Hardware Installation.............................................................6

2.1. Panel Layout ..............................................................................6

2.2. Installation Requirements...........................................................7

2.3. Procedure for Hardware Installation...........................................7

Chapter 3 Network Settings and Software Installation..........................10

3.1 Make correct network settings of your computer ....................... 10

Chapter 4 Configuring IP Sharer ..........................................................12

4.1 Start-up and Log in....................................................................12

4.2 Status ........................................................................................13

4.3 Toolbox.....................................................................................14

4.4 Primary Setup............................................................................15

4.5 DHCP Server............................................................................. 17

4.6 Virtual Server............................................................................18

4.7 Special AP.................................................................................19

4.8 Access Control.......................................................................... 20

4.9 Misc Items ................................................................................21

Appendix A Console Mode ..................................................................22

Appendix B TCP/IP Configuration for Windows 95/98........................23

B.1 Install TCP/IP protocol into your PC......................................... 23

B.2 Set TCP/IP protocol for working with IP Sharer........................ 24

-4-

Chapter 1 Introduction

Congratulations on your purchase of this outstanding Broadband Router. This product is

specifically designed for Small Office and Home Office needs. It provides a complete

SOHO solution for Internet surfing and office resources sharing, and it is easy to

configure and operate for even non-technical users. Instructions for installing and

configuring this product can be found in this manual. Before you install and use this

product, please read this manual carefully for fully exploiting the functions of this

product.

1.1 Functions and Features

??Broadband modem and IP sharing

connects multiple computers to a broadband (cable or DSL) modem or an

Ethernet router to surf the Internet.

● Auto-sensing Ethernet Switch

equipped with a 4-port auto-sensing Ethernet switch.

● VPN supported

supports multiple PPTP sessions and allows you to setup VPN server and VPN

clients.

● Firewall

all unwanted packets from outside intruders are blocked to protect your Intranet.

● DHCP server supported

all of the networked computers can retrieve TCP/IP settings automatically from

this product.

● Web-based configuring

configurable through any networked computer’s web browser using Netscape or

Internet Explorer.

-5-

● Access Control supported

allows you to assign different access right for different users.

● Virtual Server supported

enables you to expose WWW, FTP and other services on your LAN to be

accessible to Internet users.

● User-Definable Application Sensing Tunnel

user can define the attributes to support the special applications requiring

multiple connections, like Internet gaming, video conferencing, Internet

telephony and so on, then this product can sense the application type and open

multi-port tunnel for it.

● DMZ Host supported

lets a networked computer to be fully exposed to the Internet; this function is

used when special application sensing tunnel feature is insufficient to allow an

application to function correctly.

1.2 Packing List

● One broadband router unit

● One power cord and power adapter

● One user’s manual

● Two CAT-5 UTP Fast Ethernet cable

-6-

Chapter 2 Hardware Installation

2.1. Panel Layout

2.1.1. Front Panel

Figure 2-1 Front Panel

RESET When RESET is pushed, system settings will be set to factory defaults.

Readmy

&Com System status indicators, Orange. Ready is flashed once per

second to

indicate system is alive. When COM port is active, COM LED is lighted.

WAN & LAN

Ethernet port indicators, Green

. The LED flickers when LAN or WAN

port is sending or receiving data.

Link/Act. Link status indicators, Green. The LED flickers whe

n the corresponding

port is sending or receiving data

10/100 10/100 status indicators, Green

. The LED flickers when the

corresponding port is transmitting or receiving data in 10 or 100Mbps.

Port 1 -4 LAN port socket (RJ-45). These are where you will co

nnect to device on

your local area network, for example HUB and switch.

2.1.2. Rear Panel

Figure 2-2 Rear Panel

WAN WAN port socket (RJ-

45). This is where you will connect to your cable (or

DSL) modem or Ethernet router.

COM Serial port connector (9-pins D-

type male). This is where you will connect

your modem. This port is also a console port.

-7-

Power Power inlet. This is where you connect the included power adapter.

Note

that, the included power adapter is DC 5V/1A. Using wrong type of power

adapter may cause this product damage.

2.2. Installation Requirements

This product can be positioned at any convenient place in your office or house. No special

wiring or cooling requirements is needed. However, you should comply with the

following guidelines to install:

● Place this product on a flat horizontal plane.

● Keep this product away from any heating devices.

● Do not place this product in dusty or wet environment.

The recommended operational specifications of this product are:

Temperature 0 oC ~ 55 oC

Humidity 5 % ~ 90 %

In addition, remember to turn off the power, remove the power cord from the outlet, and

keep your hands dry when you try to install the hardware of this product.

2.3. Procedure for Hardware Installation

1. Setup LAN connection: connect an Ethernet cable from your computer’s Ethernet

port to one of the LAN ports of this product.

-8-

Figure 2-3Setup of LAN connections for this product.

2. Setup WAN connection: prepare an Ethernet cable for connecting this product to

your cable/xDSL modem or Ethernet backbone. Figure 2-4illustrates the WAN

connection.

Figure 2-4Setup of WAN connections for this product.

3. Power on:

Connecting the power cord to power inlet and turning the power switch on, this

product will automatically enter the self-test phase. When it is in the self-test phase,

the indicators Ready and COM will be lighted ON for about 5 seconds, and then

Ready and COM will be flashed 3 times to indicate that the self-test operation has

-9-

finished. Finally, the M1 will be continuously flashed once per second to indicate that

this product is in normal operation.

Inhaltsverzeichnis

Andere Edimax Netzwerk-Router Handbücher

Edimax

Edimax BR-6428nS V2 Installationsanleitung

Edimax

Edimax BR-6208AC Bedienungsanleitung

Edimax

Edimax BR-6424n Bedienungsanleitung

Edimax

Edimax ES-3116P Bedienungsanleitung

Edimax

Edimax AR-7167WnA Bedienungsanleitung

Edimax

Edimax GS-1008PHE Bedienungsanleitung

Edimax

Edimax BR-6208ACD Bedienungsanleitung

Edimax

Edimax AR-7286WnA Bedienungsanleitung

Edimax

Edimax AR-7084A Bedienungsanleitung

Edimax

Edimax EW-7822UAC Bedienungsanleitung

Edimax

Edimax GS-5208PLG V2 Bedienungsanleitung

Edimax

Edimax BR-6228nS V2 Bedienungsanleitung

Edimax

Edimax Wireless Multi-Homing Broadband Router Bedienungsanleitung

Edimax

Edimax BR-6476AC Bedienungsanleitung

Edimax

Edimax BR-6435nD Bedienungsanleitung

Edimax

Edimax AR-7064+ Bedienungsanleitung

Edimax

Edimax BR-6478AC Bedienungsanleitung

Edimax

Edimax HP-8501 Bedienungsanleitung

Edimax

Edimax AR-7211A V2 Bedienungsanleitung

Edimax

Edimax HP-8501 Bedienungsanleitung

Edimax

Edimax BR-6475nD Bedienungsanleitung

Edimax

Edimax BR-6258n Nano router Gebrauchsanweisung

Edimax

Edimax HP-8501 Bedienungsanleitung

Edimax

Edimax BR-6478 AC V2 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise