Edimax N-9210TX-64 Bedienungsanleitung

64/32bit 66/33MHz PCI

Gigabit Adapter

Gigabit Ethernet Adapter

EN-9210TX-64

User’s Manual

FCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply

with the limits of a Class B computing devices,

pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

If you suspect this product is causing interference, turn

your computer on and off while your radio or TV is

showing interference. If the interference disappears

then when you turn the computer off and reappears then

you turn the computer on, something in the computer is

causing interference.

You can try to correct the interference by one or more

of the following measures :

1. Reorient/Relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

difference from that to which the receiver is

connected.

4. Ensure that all expansion slots (on the back or side

of the computer) are covered. Also ensure that all

metal retaining brackets are tightly attached to the

computer.

1Introduction

Thanks you for purchasing our Gigabit Fast Ethernet

Adapter. This guide is to provide the installation and

usage of this adapter for network installers and users.

The Gigabit network adapter complies to 32/64 bit PCI

specification and supports half/full duplex feature which

can double network speed.

This adapter supports 1000Mbps(Gigabit), 100Mbps and

10Mbps network speed, 1000BaseT operates on all four

pairs of category 5 UTP cable, 100BaseTX operates on

two pairs of category 5 UTP cable and 10BaseT operates

on Category 3,4,5 UTP cable.

With the Auto-Negotiation technology, network speed is

auto detected. When you connect the adapter to Gigabit

Switch or another Gigabit NIC, the speed will be doubled

to 2000Mbps (1000Mbps Transmit and 1000Mbps

Receive). If you connect the adapter to 100BaseTX hub,

the network speed is 100Mbps. Similarly, if the hub is a

switching hub which supports full duplex function, then

the speed will be doubled to 200Mbps.

This adapter supplies many drivers including NDIS 4,5

driver for Microsoft Windows 95, 98, Me, NT, 2000, XP,

Novell Netware ODI for DOS, Netware Server 4.x/5.x,

Unix and Linux. Whatever your requirements are ease of

installation, superior performance or responsive support

backed up by unlimited technical support, this adapter is

the superior choice.

2Features & Specifications

(1) Features & Benefits

ySupports 64/32-bit, 66/33MHz PCI Bus Master for high

performance and low processor utilization.

yComplies with the IEEE 802.3 CSMA/CD,

1000BaseT, 100BaseTX and 10BaseT standard.

yFull duplex design to double the performance to

20Mbps/200Mbps/2000Mbps.

yOne RJ-45 connector for 1000Mbps, 100Mbps or

10Mbps network speed.

ySupport Auto-negotiation function.

• Auto-setups IRQ and I/O address.

• NDIS 4,5 driver for Microsoft Windows 95, 98, Me, NT,

2000, XP, Unix, Linux, Novell Netware ODI for DOS

and Novell Netware Server 4.x/5.x

yProvide three LEDs to indicate network link/activity and

10/100/1000Mbps selection.

(2) Technical Specification

yTopology : Star

yConnector : RJ-45

yStandard : IEEE 802.3 10BaseT

IEEE 802.3u 100BaseTX

IEEE 802.3ab 1000BaseT

yTransmission Rate : 10Mbps or 20Mbps

100Mbps or 200Mbps

1000Mbps or 2000Mbps

yHardware Required : IBM compatible PC with

available PCI slot

( PCI 2.1/2.2 ),66/33MHz,

32bit & 64bit

yIRQ Line : Assigned by system

yI/O Address : Assigned by system

yDrivers : NDIS 4,5 driver for Microsoft

Windows 95/98/Me/NT/2000/

XP, Novell Netware ODI for

DOS, Netware Server 4.x/5.x,

Unix, Linux

yLEDs : 10Mbps Link/Activity

100Mbps Link/Activity

1000Mbps Link/Activity

yTemperature : 0°C to 55°C (Operating)

yHumidity : 10% to 90% (Non-condensing)

yCertification : FCC Class B, CE Mark, C-tick

yDimension : 163 x 63 mm

yWeight : 100g (Max.)

3Installation

(1) Hardware Installation

To insert the network adapter into your PC, follow the

steps bellow :

1. Turn off the computer and remove its cover.

2. Insert the adapter into a PCI slot.

3. Secure this adapter to the rear of the computer

chassis and put back the computer cover.

4. Connect the adapter to the network using twisted-

pair cable.

(2) Driver Installation

Use the drivers supplied by the diskette included in this

product. For detail description, please execute the

readme.exe in the root directory of the diskette

provided by this product.

4Trouble-shooting

If you experience any problems with the adapter, first

make sure the appropriate driver is loaded, the proper

cable is connected to the adapter port and the

hub/switch complies with the adapter specification,

such as 10Mbps 10BaseT, 100Mbps 100BaseTX and

1000Mbps 1000BaseT, then check the LED.

The adapter provides three LEDs to indicate network

status.

10 Link/Activity

The LED indicates if the 10Mbps UTP has been LINK

ok or not. When the light is OFF, it indicates that the

10Mbps UTP port has not been connected or LINK not

ok. When the light is ON, it indicates that the 10Mbps

UTP port LINK ok. When the light is BLINKING, it

indicates that there is traffic flow on the network which

the adapter is connected to.

100 Link/Activity

The LED indicates if the 100Mbps UTP has been

LINK ok or not. When the light is OFF, it indicates

that the 100Mbps UTP port has not been connected or

LINK not ok. When the light is ON, it indicates that

the 100Mbps UTP port LINK ok. When the light is

BLINKING, it indicates that there is traffic flow on the

network which the adapter is connected to.

1000 Link/Activity

The LED indicates if the 1000Mbps (Gigabit) UTP has

been LINK ok or not. When the light is OFF, it

indicates that the 1000Mbps UTP port has not been

connected or LINK not ok. When the light is ON, it

indicates that the 1000Mbps UTP port LINK ok. When

the light is BLINKING, it indicates that there is traffic

flow on the network which the adapter is connected to.

TRADEMARKS

product. No part of this manual may be reproduced,

transcribed, stored in a retrieval system, translated into

any language or computer language without the prior

written consent of the manufacturer.

All brand and product names are trademarks and/or

registered trademarks of their respective companies.

Inhaltsverzeichnis

Andere Edimax PCI-Karte Handbücher

Edimax

Edimax EW-7128Gn Bedienungsanleitung

Edimax

Edimax EW-7126 Bedienungsanleitung

Edimax

Edimax EW-7326Ig Bedienungsanleitung

Edimax

Edimax EW-7128g Bedienungsanleitung

Edimax

Edimax EN-9250TX-E Bedienungsanleitung

Edimax

Edimax EW-7157Mg Bedienungsanleitung

Edimax

Edimax EW-7325Ig Bedienungsanleitung

Edimax

Edimax EN-9250TX-E Bedienungsanleitung

Edimax

Edimax EW-7326Ig Bedienungsanleitung

Edimax

Edimax EW-7727In Bedienungsanleitung

Edimax

Edimax EN-9260TX-E Bedienungsanleitung

Edimax

Edimax EN-9130TX Bedienungsanleitung

Edimax

Edimax EN-9235TX-32 Bedienungsanleitung

Edimax

Edimax EW-7326Ig Bedienungsanleitung

Edimax

Edimax EW-7728In Bedienungsanleitung

Edimax

Edimax EW-7326Ig Bedienungsanleitung

Edimax

Edimax EN-9130TX Bedienungsanleitung

Edimax

Edimax EN-9235TX-32 Bedienungsanleitung

Edimax

Edimax 802.11g Wireless LAN Cardbus Adapter Bedienungsanleitung

Edimax

Edimax Draft 2.0-N Bedienungsanleitung

Edimax

Edimax EW-7628Ig Bedienungsanleitung

Edimax

Edimax EW-7628Ig Bedienungsanleitung

Edimax

Edimax EU-CV4N Bedienungsanleitung

Edimax

Edimax EN-9230TX-32 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung