Elcometer Zahn 2210 Bedienungsanleitung
English
Elcometer
2210 • 2215 • 2310
2434 • 2435 • 2436 • 2437
Viscosity Dip Cup
Operating Instructions
2210_TMA_0317_00_05.fm Page -1 Thursday, July 15, 2010 9:38 AM
English
R
is a registered trademark of Elcometer Limited.
All other trademarks acknowledged.
© Copyright Elcometer Limited. 2009./2010.
All rights reserved. No part of this Document may be reproduced, transmitted, transcribed, stored (in a
retrieval system or otherwise) or translated into any language, in any form or by any means (electronic,
mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
A copy of this Instruction Manual is available for download on our Website via www.elcometer.com.
Doc.No. TMA-0317 Issue 05
Text with Cover No: 19333
2210_TMA_0317_00_05.fm Page 0 Thursday, July 15, 2010 9:38 AM
R
1
CONTENTS
Section Page
1 About your viscosity cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Taking a reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4 Technical specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
7 Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8 Related equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
9 Viscosity standard oils. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
10 Elcometer viscosity cups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2210_TMA_0317_00_05.fm Page 1 Thursday, July 15, 2010 9:38 AM
R
2
Thank you for your purchase of this Elcometer Viscosity Dip Cup. Welcome to Elcometer.
Elcometer are world leaders in the design, manufacture and supply of inspection equipment for coatings
and concrete. Our products cover all aspects of coating inspection, from development through application
to post application inspection.
This Elcometer Viscosity Dip Cup is a world beating product. With the purchase of this Viscosity Dip Cup
you now have access to the worldwide service and support network of Elcometer. For more information visit
our website at www.elcometer.com
1 ABOUT YOUR VISCOSITY DIP CUP
Elcometer Viscosity Dip Cups are easy-to-use gauges for rapid measurement of viscosity of liquids.
The cup is held by its handle and is dipped into the liquid to be measured. The cup is removed from the
liquid and the time taken for the liquid to drain through an orifice in the bottom of the cup is measured.
The measured kinematic viscosity is generally expressed in seconds (s) flow time, which can be converted
to Centistokes (cSt). A wide range of cups with different orifices is available for measurements between
2 cSt and 1840 cSt.
1.1 THESE INSTRUCTIONS
These instructions describe the operation of the following Elcometer Viscosity Dip Cups:
Elcometer 2210: Zahn
Elcometer 2215: Lory LCH
Elcometer 2310: Shell
Elcometer 2434/5/6/7: Frikmar
2210_TMA_0317_00_05.fm Page 2 Thursday, July 15, 2010 9:38 AM
R
3
1.2 STANDARDS
The Elcometer Viscosity Dip Cups can be used in accordance with a wide range of National and
International Standards.
For full details of which standards are appropriate see “Elcometer viscosity dip cups” on page 10.
1.3 WHAT THE BOX CONTAINS
• Elcometer Viscosity Dip Cup with handle
• Operating instructions
• Storage case
The Elcometer Viscosity Dip Cup is packed in a cardboard and foam package. Please ensure that this
packaging is disposed of in an environmentally sensitive manner. Consult your local Environmental
Authority for further guidance.
1.4 CAUTION
Take care to avoid damaging your viscosity dip cup. Damage to the orifice, scratches on the internal
surface or deformation of the cup will affect the readings and the gauge may have to be replaced.
2 TAKING A READING
2.1 BEFORE YOU START
• Select a cup which gives a flow time of between 30 seconds and 100 seconds.
• Ensure the handle, the cup and the orifice are clean and free of debris, etc.
• The liquid being tested must be homogeneous and must not contain any bubbles.
• Measure and record the temperature of the liquid.
2210_TMA_0317_00_05.fm Page 3 Thursday, July 15, 2010 9:38 AM
R
4
2.2 PROCEDURE
1. Immerse the cup completely into the liquid and twist several times to
dislodge any bubbles which may be clinging to the internal surface of
the cup (Figure 1, A).
2. Stir the liquid gently to ensure uniform temperature and density.
3. Leave the cup in the liquid for 1 to 5 minutes: For a Zahn cup (which
has a low mass) 1 minute will be sufficient; for cups with higher mass,
5 minutes will be better.
4. Lift the cup vertically out of the liquid (Figure 1, B) and start the
stopwatch the moment the top of the cup breaks the surface of the
liquid.
5. Watch the flow of liquid from the orifice and stop the stopwatch the
moment the flow breaks.
When using a Lory LCH Viscosity Dip Cup (Elcometer 2215),
observe the surface of the liquid and stop the stopwatch the moment the top of the
spindle appears.
AB
Figure 1. Using the
Viscosity Dip Cup
Lory LCH
Cup
2210_TMA_0317_00_05.fm Page 4 Thursday, July 15, 2010 9:38 AM
R
5
2.3 AFTER THE TEST
Clean the gauge and all equipment.
After cleaning, ensure that all materials are removed and that the instrument is dry.
3 CONVERTING TO VISCOSITY
The measured kinematic viscosity is expressed generally in seconds (s) flow time, which can be converted
to Centistokes (cSt).
To convert from flow time (s) to kinematic viscosity (cSt), use the Elcometer 2400 Viscosity
Disc - see “Related equipment” on page 12.
Alternatively, use the following formula:
V = K(t - c)
where
V = kinematic viscosity in cSt (mm²/s)
t = flow time in seconds
Do not use wire brushes, metal scrapers,
metal files or other metallic tools for
cleaning.
Clean the gauge and all equipment using a
suitable solvent only.
Viscosity
Disc
2210_TMA_0317_00_05.fm Page 5 Thursday, July 15, 2010 9:38 AM
R
6
K and c are constants given in the following table:
Please note:
• The formula treats the cups as linear, which they are not.
• The formula is effective for flow times between 20 seconds and 80 secondsa.
Cup K c Cup K c
Zahn Cup 1a
a. The constants are given in Patton, T. C., Paint Flow and Pigment Dispersion, second edition, John Wiley & Sons,
New York, 1979, page 82.
1.1 29 Shell Cup 1 0.226 13
Zahn Cup 2a3.5 14 Shell Cup 2 0.576 5
Zahn Cup 3a11.7 7.5 Shell Cup 2½ 0.925 3
Zahn Cup 4a14.8 5 Shell Cup 3 1.51 2
Zahn Cup 5a23 0 Shell Cup 3½ 2.17 1.5
Shell Cup 4 3.45 1
Shell Cup 5 6.5 1
Shell Cup 6 16.2 0.5
a. Zahn Cup 1 - formula is effective between 35 seconds and 80 seconds.
2210_TMA_0317_00_05.fm Page 6 Thursday, July 15, 2010 9:38 AM
R
7
4 STORAGE
Always store the gauge in its case when it is not being used.
5 MAINTENANCE
Elcometer Viscosity Dip Cups are designed to give many years reliable service under normal operating and
storage conditions.
Regular calibration checks over the life of the gauge are a requirement of quality management procedures
e.g. ISO 9000 and other standards.
To check for wear, use Elcometer 2410 Viscosity Standard Oilsband measure the drain time. If wear is
detected, contact Elcometer or your local Elcometer supplier.
Details of Elcometer offices around the world are given on the outside cover of these Operating Instructions.
Alternatively visit the Elcometer website, www.elcometer.com
b. See “Elcometer 2434/5/6/7 Frikmar: Anodised Aluminium” on page 8 for ordering information.
2210_TMA_0317_00_05.fm Page 7 Thursday, July 15, 2010 9:38 AM
R
8
6 ACCESSORIES
Calibration certificate
Elcometer Viscosity Dip Cups are supplied with a Batch Calibration Certificatecas standard. Individual
Calibration Certificates are availablecbut must be requested at the time of order as they can not be issued
retrospectively.
7 TECHNICAL SPECIFICATION
Elcometer 2210 Zahn, 2215 Lory LCH and 2310 Shell: Stainless steel
Elcometer 2434/5/6/7 Frikmar: Anodised Aluminium
c. Certificates are not available for the Elcometer 2215.
Accuracy 2210 Zahn
2310 Shell 2434 DIN4
2437 ISO 2435 ASTM
15% 3% 10%
2210_TMA_0317_00_05.fm Page 8 Thursday, July 15, 2010 9:38 AM
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere Elcometer Messgerät Handbücher
Elcometer
Elcometer 456 Bedienungsanleitung
Elcometer
Elcometer SCM400 Bedienungsanleitung
Elcometer
Elcometer Novo-Gloss 406 Bedienungsanleitung
Elcometer
Elcometer 415 Bedienungsanleitung
Elcometer
Elcometer 2250 Bedienungsanleitung
Elcometer
Elcometer 308 Bedienungsanleitung
Elcometer
Elcometer Protovale 331 Bedienungsanleitung
Elcometer
Elcometer 456 Model E Bedienungsanleitung
Elcometer
Elcometer 204 Bedienungsanleitung
Elcometer
Elcometer 103 Bedienungsanleitung
Elcometer
Elcometer 355 Bedienungsanleitung
Elcometer
Elcometer PG70 Bedienungsanleitung
Elcometer
Elcometer Protovale CoverMaster CM52 Bedienungsanleitung
Elcometer
Elcometer 204 Bedienungsanleitung
Elcometer
Elcometer 224 Bedienungsanleitung
Elcometer
Elcometer Novo-Gloss 401 Bedienungsanleitung
Elcometer
Elcometer 550 Bedienungsanleitung
Elcometer
Elcometer PTG6 Bedienungsanleitung
Elcometer
Elcometer E130-S Bedienungsanleitung
Elcometer
Elcometer 407L Bedienungsanleitung
