Elcometer 319 Standard Bedienungsanleitung

English

Elcometer 319

Dewpoint Meter

Operating Instructions

English

The Elcometer 319 Dewmeter has

been tested in accordance with EU

regulations governing electro-

magnetic compliance and meets the required

directives.

Note: Gauge readings may be affected if the unit

is operated within a radio frequency

electromagnetic strength of greater than3 V/m.

is a registered trademark of

Elcometer Instruments Ltd.

All other trademarks acknowledged.

2001 - 2006.

be reproduced, transmitted, transcribed, stored

(in a retrieval system or otherwise) or translated

into any language, in any form or by any means

(electronic, mechanical, magnetic, optical,

manual or otherwise) without the prior written

permission of Elcometer Instruments Ltd.

Doc No. TMA-0245 Issue 06

Text with Cover No. 16468

CONTENTS

Section Page

1 About your gauge ....................................2

1.1 Climatic conditions . . . . . . . . . . . . . . . . . . 3

1.2 Standards . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 What the box contains . . . . . . . . . . . . . . . 3

2 Quick start ................................................5

3 Getting started .........................................6

3.1 Fitting batteries . . . . . . . . . . . . . . . . . . . . . 6

3.2 Switching the gauge on and off . . . . . . . . . 6

3.3 What the buttons do . . . . . . . . . . . . . . . . . 7

3.4 What the symbols mean . . . . . . . . . . . . . . 8

4 The sensors ............................................10

5 ∆T Alarm .................................................10

6 Taking a reading ....................................11

7 Using your gauge memory ....................11

7.1 Switching memory on . . . . . . . . . . . . . . . 12

7.2 Storing a reading . . . . . . . . . . . . . . . . . . . 12

7.3 Recalling (viewing) readings . . . . . . . . . . 12

7.4 Printing readings . . . . . . . . . . . . . . . . . . . 13

7.5 Exporting readings . . . . . . . . . . . . . . . . . 14

7.6 Clearing (deleting) readings . . . . . . . . . . 15

8 Gauge set up ..........................................16

9 Data transfer software (EDTS+) ............18

10 Maintenance ...........................................19

11 Surface temperature probes .................20

12 Spare parts and accessories ................20

13 Technical specifications .......................21

14 Related equipment .................................22

hank you for your purchase of this Elcometer

319 Dewmeter. Welcome to Elcometer.

Elcometer are world leaders in the design,

manufacture and supply of inspection equipment

for coatings and concrete. Our products cover all

aspects of coating inspection, from development

through application to post application inspection.

Your Elcometer 319 Dewmeter is a world beating

product. With the purchase of this product you

now have access to the worldwide service and

support network of Elcometer. For more

information visit our website at

www.elcometer.com

1 ABOUT YOUR GAUGE

The Elcometer 319 Dewmeter gauge is used to

check climatic conditions in the surface treatment

industry.

Your Elcometer 319 measures:

• Air temperature

• Relative humidity

• Surface temperature

From these measured values, your gauge then

calculates:

• Dewpoint temperature

• Delta T (∆T)

The Elcometer 319 Dewmeter has readings

memory and an internal clock. This allows

measurements and a date/time stamp to be

stored as they are taken.

The stored data can be viewed on the display,

printed via an infra-red link or downloaded to a

PC using an optional interface cable.

1.1 Climatic conditions

The risk of condensation

forming on surfaces about to

be coated is always present

and is difficult to assess

without suitable instruments.

In particular, it is difficult to

detect condensation on blast

cleaned surfaces.

Surfaces with a temperature

at or below this dewpoint

temperature will be covered

with condensation/moisture.

It is important to take

measurements at regular

intervals and at different

points on the surface.

Factors like sun, shadow,

shape and mass of the

object to be coated can

create unexpected thermal

behaviour on the surface.

The memory in your Elcometer 319 will record

climatic conditions during a coating job.

1.2 Standards

Your Elcometer 319 Dewmeter can be used in

accordance with the following National and

International standards:

BS 7079-B4 ISO 8502-4

NACE RP propo 97

1.3 What the box contains

• Elcometer 319 Dewmeter

• Carrying case

• Operating instructions

HOLD

OFF

319 Dewmeter

The Elcometer 319 Dewmeter is packed in a

cardboard and foam package. Please ensure

that this packaging is disposed of in an

environmentally sensitive manner. Please

consult your local Environmental Authority for

further guidance.

To maximise the benefits of your new

Elcometer 319 Dewmeter please take some

time to read these Operating Instructions. Do

not hesitate to contact Elcometer or your

Elcometer supplier if you have any questions.

2 QUICK START

1. Fit batteries (see page 6).

2. Press to switch on.

3. Humidity and Temperature are shown on the

display.

4. If required, press or to change the

type of temperature displayed:

To learn how to store readings in memory, see

“Using your gauge memory” on page 11.

To learn how to set up your gauge, see “Gauge

set up” on page 16.

Ambient Surface Dewpoint Delta T

%Rh

menu alarm link

Temperature

Humidity

Temperature type

3 GETTING STARTED

3.1 Fitting batteries

Alkaline batteries must be disposed of carefully to

avoid environmental contamination. Please

consult your local Environmental Authority for

information on disposal in your region.

Do not dispose of any battery in fire.

The condition of the batteries is indicated by a

symbol on the display - see “What the symbols

mean” on page 8.

To retain time and date, fit new batteries within 30

seconds of removal of the exhausted batteries.

Always check the time and date after battery

replacement. Data in the memory is not affected

by removal of the batteries.

3.2 Switching the gauge on and off

To switch the gauge on, press .

To switch the gauge off, press . The guage

can be set to switch off automatically 2 minutes

after the last key press - see “Gauge set up” on

page 16.

3 x LR6 (AA)

batteries

OFF

3.3 What the buttons do

Scrolls left through

items on the display.

Scrolls right through

items on the display.

Press both arrow

buttons together to access

memory and gauge

configuration.

Freezes the measurements on the display.

If the memory is switched on, press this button

twice to store the measurements in memory.

The function of this button changes when

accessing memory and gauge set up.

Switches the gauge on.

Once the instrument is on, this button switches

on or off the illuminationaof the LCD and the

keyboard.

Switches the gauge off.

While navigating menus, this button escapes

from a menu-option or cancels a choice without

storing data.

a. Illumination switches off automatically after

approximately 40 seconds.

HOLD

OFF

319 Dewmeter

HOLD

OFF

3.4 What the symbols mean

Menu Indicates that the

display is showing

menu information,

not readings.

Alarm Indicates that ∆T is

less than 3°C.

When ∆T rises

above 3.5°C, the

alarm switches off.

Link Indicates that

memory is on.

Press twice

to store a reading

while memory is

on.

Battery

status

4 segments: Full

1 segment: Empty

Flashing: Change

battery now

Relative

humidity

Time

%Rh

alarm linkmenu

%Rh

menu alarm link

%Rh

menu alarm link

HOLD

%Rh

menu alarm link

%Rh

menu alarm link

Andere Handbücher für 319 Standard

Inhaltsverzeichnis

Andere Elcometer Messgerät Handbücher

Elcometer

Elcometer Zahn 2210 Bedienungsanleitung

Elcometer

Elcometer 320 Bedienungsanleitung

Elcometer

Elcometer SAGOLA Classic S1 Bedienungsanleitung

Elcometer

Elcometer 121/2 Bedienungsanleitung

Elcometer

Elcometer 308 Bedienungsanleitung

Elcometer

Elcometer 207 Bedienungsanleitung

Elcometer

Elcometer 456 Bedienungsanleitung

Elcometer

Elcometer 205 Bedienungsanleitung

Elcometer

Elcometer Novo-Gloss 402 Bedienungsanleitung

Elcometer

Elcometer Novo-Gloss 401 Bedienungsanleitung

Elcometer

Elcometer 345 Bedienungsanleitung

Elcometer

Elcometer CG70ABDL Bedienungsanleitung

Elcometer

Elcometer 456 Bedienungsanleitung

Elcometer

Elcometer 204 Bedienungsanleitung

Elcometer

Elcometer 456 IPC Bedienungsanleitung

Elcometer

Elcometer 319/2 Bedienungsanleitung

Elcometer

Elcometer 224 Bedienungsanleitung

Elcometer

Elcometer 331 H Bedienungsanleitung

Elcometer

Elcometer 116c Bedienungsanleitung

Elcometer

Elcometer 223 Bedienungsanleitung

Elcometer

Elcometer Protovale 331 Bedienungsanleitung

Elcometer

Elcometer PTG6 Bedienungsanleitung

Elcometer

Elcometer 456 Model E Bedienungsanleitung

Elcometer

Elcometer Novo-Gloss 406 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung