Emerson Rosemount 2051CF series Bedienungsanleitung

Quick Start Guide

00825-0600-4101, Rev CA

March 2020

Rosemount™ 2051 Pressure Transmitter

and Rosemount 2051CF Series Flow

Meter

with FOUNDATION™ Fieldbus Protocol

Contents

About this guide .......................................................................................................................... 3

System readiness......................................................................................................................... 5

Mount the transmitter..................................................................................................................7

Tagging......................................................................................................................................14

Housing rotation........................................................................................................................ 15

Set the switches......................................................................................................................... 16

Wire, ground, and power up.......................................................................................................18

Configure................................................................................................................................... 21

Zero trim the transmitter........................................................................................................... 28

Product certifications................................................................................................................. 29

Quick Start Guide March 2020

1 About this guide

This guide provides basic guidelines for Rosemount 2051 Pressure

Transmitters. It does not provide instructions for configuration, diagnostics,

maintenance, service, troubleshooting, Explosion-proof, Flameproof, or

intrinsically safe (I.S.) installations. Refer to Rosemount 2051 Reference

Manual for more instructions. This guide is also available electronically at

Emerson.com/Rosemount.

1.1 Safety messages

WARNING

Explosions could result in death or serious injury.

Installation of these transmitters in an explosive environment must be in

accordance with the appropriate local, national, and international standards,

codes, and practices. Review the approvals section of the Rosemount 2051

Reference Manual for any restrictions associated with a safe installation.

In an explosion-proof/flameproof installation, do not remove the transmitter

covers when power is applied to the unit.

Process leaks could result in death or serious injury.

To avoid process leaks, only use the O-ring designed to seal with the

corresponding flange adapter.

Electrical shock could cause death or serious injury.

Avoid contact with the leads and terminals. High voltage that may be

present on leads can cause electrical shock.

Conduit/cable entries

Unless marked, the conduit/cable entries in the transmitter housing use a

½–14 NPT thread form. Entries marked “M20” are M20 × 1.5 thread form.

On devices with multiple conduit entries, all entries will have the same

thread form. Only use plugs, adapters, glands, or conduit with a compatible

thread form when closing these entries.

March 2020 Quick Start Guide

Quick Start Guide 3

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to and/or

misconfiguration of end users’ equipment. This could be intentional or

unintentional and needs to be protected against.

Physical security is an important part of any security program and

fundamental to protecting your system. Restrict physical access by

unauthorized personnel to protect end users’ assets. This is true for all

systems used within the facility.

Quick Start Guide March 2020

2 System readiness

2.1 Confirm correct device driver

•Verify the correct device driver (DD/DTM™) is loaded on your systems to

ensure proper communications.

•Download the correct device driver at your host vendor download site,

Emerson.com or Fieldbus.org.

2.1.1 Device revisions and drivers

Table 2-1 provides the information necessary to ensure you have the correct

device driver and documentation for your device.

Table 2-1: Rosemount 2051 FOUNDATION Fieldbus Device Revisions and

Files

Device

revision

(1)

Host Device

driver

(DD)(2)

Obtain at Device driver

(DTM)

Reference

document

2 All DD4: DD

Rev 1

Fieldbus.org Emerson.com 00809-0200-

4101,

Rev BA or

newer

All DD5: DD

Rev 1

Fieldbus.org

Emerson AMS Device

Manager V

10.5 or

higher: DD

Rev 2

Emerson.com

Emerson AMS Device

Manager V

8 to 10.5:

DD Rev 1

Emerson.com

Emerson 375/475:

DD Rev 2

FieldCommun

icator.com

1 All DD4: DD

Rev 4

Fieldbus.org Emerson.com 00809-0200-

4101,

Rev AA

All DD5: NA N/A

Emerson AMS Device

Manager V

8 or higher:

DD Rev 2

Emerson.com

March 2020 Quick Start Guide

Quick Start Guide 5

Table 2-1: Rosemount 2051 FOUNDATION Fieldbus Device Revisions and

Files (continued)

Device

revision

(1)

Host Device

driver

(DD)(2)

Obtain at Device driver

(DTM)

Reference

document

Emerson 375/475:

DD Rev 2

FieldCommun

icator.com

(1) FOUNDATION Fieldbus device revision can be read using a FOUNDATION Fieldbus

capable configuration tool.

(2) Device driver file names use device and DD revision. To access functionality, the

correct device driver must be installed on your control and asset management

hosts, and on your configuration tools.

Figure 2-1: Installation Flowchart

Quick Start Guide March 2020

3 Mount the transmitter

3.1 Liquid applications

Procedure

1. Place taps to the side of the line.

2. Mount beside or below the taps.

3. Mount the transmitter so the drain/vent valves are oriented upward.

3.2 Gas applications

Procedure

1. Place taps in the top or side of the line.

2. Mount beside or above the taps.

March 2020 Quick Start Guide

Quick Start Guide 7

3.3 Steam applications

Procedure

1. Place taps to the side of the line.

2. Mount beside or below the taps.

3. Fill impulse lines with water.

Quick Start Guide March 2020

Figure 3-1: Panel and Pipe Mounting

Panel mount(1) Pipe mount

Coplanar flange

Traditional flange

Rosemount 2051T

(1) × 1 panel bolts are customer supplied.

March 2020 Quick Start Guide

Quick Start Guide 9

3.4 Bolting considerations

If the transmitter installation requires assembly of the process flanges,

manifolds, or flange adapters, follow the assembly guidelines to ensure a

tight seal for optimal performance characteristics of the transmitters. Use

only bolts supplied with the transmitter or sold by Emerson as spare parts.

Figure 3-2 illustrates common transmitter assemblies with the bolt length

required for proper transmitter assembly.

Figure 3-2: Common Transmitter Assemblies

4 × 1.75-in.

(44 mm)

4 × 1.75-in.

(44 mm)

4 × 2.25-in.

(57 mm)

4 ×1.75-in.

(44 mm) 4 ×1.50-in.

(38 mm)

4 × 2.88-in.

(73 mm)

A. Transmitter with coplanar flange

B. Transmitter with coplanar flange and optional flange adapters

C. Transmitter with traditional flange and optional flange adapters

D. Transmitter with coplanar flange and optional manifold and flange

adapters

Bolts are typically carbon steel (CS) or stainless steel (SST). Confirm the

material by viewing the markings on the head of the bolt and referencing

Table 3-1. If bolt material is not shown in Table 3-1, contact a local Emerson

representative for more information.

Carbon steel bolts do not require lubrication and the stainless steel bolts are

coated with a lubricant to ease installation. However, no additional lubricant

should be applied when installing either type of bolt.

Use the following bolt installation procedure:

Procedure

1. Tighten the bolts by hand.

2. Torque the bolts to the initial torque value using a crossing pattern.

See Table 3-1 for initial torque value.

Quick Start Guide March 2020

Andere Handbücher für Rosemount 2051CF series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Emerson Messgerät Handbücher

Emerson

Emerson LMS1000 Bedienungsanleitung

Emerson

Emerson Rosemount 753R Bedienungsanleitung

Emerson

Emerson Energy Meter Bedienungsanleitung

Emerson

Emerson AMS 2140 Bedienungsanleitung

Emerson

Emerson EC2-XC645CX Verdrahtungsschema

Emerson

Emerson Micro Motion SGM Kurzanleitung

Emerson

Emerson 250-5000 Bedienungsanleitung

Emerson

Emerson Micro Motion GDM Bedienungsanleitung

Emerson

Emerson Rosemount MLT 2 Kurzanleitung

Emerson

Emerson Rosemount 8800D Series Benutzerhandbuch

Emerson

Emerson Rosemount BINOS 100 F Bedienungsanleitung

Emerson

Emerson Daniel 3410 Series Bedienungsanleitung

Emerson

Emerson FB2100 Bedienungsanleitung

Emerson

Emerson Rosemount 3812 Bedienungsanleitung

Emerson

Emerson ALCO Controls AMI Series Bedienungsanleitung

Emerson

Emerson Dixell XWEB EVO Bedienungsanleitung

Emerson

Emerson Rosemount Analytical X-STREAM X2 Series Bedienungsanleitung

Emerson

Emerson Rosemount 753R Bedienungsanleitung

Emerson

Emerson Rosemount CT5400 Bedienungsanleitung

Emerson

Emerson MicroMotion HPC010 Bedienungsanleitung

Emerson

Emerson FB3000 Bedienungsanleitung

Emerson

Emerson RLDS Betriebsanleitung

Emerson

Emerson Rosemount 6888Xi Bedienungsanleitung

Emerson

Emerson Micro Motion CDM100M A Series Kurzanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung