Enable-IT 850 CPE Bedienungsanleitung

Ethernet Extension Experts

Enable-IT 850 CPE

Ethernet Extender

User Manual



Page 2 of 13 Ethernet Extension Experts

may be reproduced in any form or by any means or used to make any derivative work (such

as translation, transformation, or adaptation) without written permission from Enable-IT, Inc.

Enable-IT, Inc reserves the right to revise this documentation and to make changes in

content from time to time without obligation on the part of Enable-IT, Inc to provide

notification of such revision or change.

Enable-IT, Inc provides this documentation without warranty, term, or condition of any kind,

either implied or expressed, including, but not limited to, the implied warranties, terms or

conditions of merchantability, satisfactory quality, and fitness for a particular purpose.

Enable-IT, Inc may make improvements or changes in the product(s) and/or the

program(s) described in this documentation at any time.

If there is any software on removable media described in this documentation, it is furnished

under a license agreement included with the product as a separate document, in the hard

copy documentation. If you are unable to locate a copy, please contact Enable-IT, Inc and a

copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the software

described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at

private expense. Software is delivered as "Commercial Computer Software" as defined in

DFARS 252.227-7014 (June 1995) or as a "commercial item" as defined in FAR 2.101 (a)

and as such is provided with only such rights as are provided in Enable-IT, Inc's standard

commercial license for the Software.

Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov

1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or

deface any portion of any legend provided on any licensed program or documentation

contained in, or delivered to you in conjunction with, this User Guide.

Unless otherwise indicated, Enable-IT, Inc registered trademarks are registered in the

United States and may or may not be registered in other countries

Page 3 of 13 Ethernet Extension Experts

CONTENTS

ABOUT THIS GUIDE 4

1 INTRODUCING THE ENABLE-IT 850 CPE ETHERNET EXTENDER 5

About the 850 CPE Ethernet Extender 5

Key Benefits 6

Summary of Features 6

Typical Use Applications 7

2 INSTALLING THE ENABLE-IT 850 CPE ETHERNET EXTENDER 8

Site Plan – Installation Design Considerations 8

Unpacking the 850 CPE Ethernet Extender 8

Perform an out of the box Test 9

Performing the On-Site Installation 9

Building the 850 CPE Interlink wiring 10

Attaching cabling and devices 10

Troubleshooting & Performance Settings (DIP switch) 10

3 TECHNICAL SUPPORT

Online Technical Services 10

World Wide Web Site 11

Returning Products for Repair 11

4ENABLE-IT INC.LIMITED WARRANTY 11

5CONTACT US 13

Page 4 of 13 Ethernet Extension Experts

ABOUT THIS GUIDE

This guide provides all the information needed to install and use the Enable-IT

850 CPE Ethernet Extender Kit. This guide is intended for use by technicians

who are responsible for installing and setting up network equipment.

Consequently, it is assumed that the installer has a basic working knowledge of

LANs (Local Area Networks) and voice telecom wiring.

If the information in the release notes that are shipped with your product differs

from the information in this guide, follow the instructions in the release notes.

Most user guides and release notes are available in Adobe Acrobat

Reader Portable Document Format (PDF) or HTML on the Enable-IT World Wide

Web site: http://www.ethernetextender.com/manuals/850 CPEManual.pdf

Page 5 of 13 Ethernet Extension Experts

INTRODUCING THE 850 CPE ETHERNET EXTENDER

Congratulations on purchasing the Enable-IT’s 850 CPE Ethernet Extender — the

simplest method to stretch your broadband solutions for in-building deployment in

commercial office buildings, hotels, and multi-tenant residential units.

The 850 CPE Extended Ethernet Unit offers the Lowest Cost Solution in a simple design

for rapid install using existing 1 pair Telco wiring.

This chapter contains introductory information about The 850 CPE Extended Ethernet

Unit and how it can be used in your network. It covers the following topics:

•About the 850 CPE Extended Ethernet Unit

•Key Benefits

•Summary of Features

•Typical Applications

About the 850 CPE Extended Ethernet

The 850 CPE Extended Ethernet Kit solves the problem of high costs associated with

stretching your backbone with traditional fiber or a series of hubs/repeaters.

In many office buildings, preferred network access is a dedicated Ethernet line,

however Ethernet over twisted pair wiring has its distance limitations of just 328 ft. In

order to drive Ethernet signal further, one would have to add repeaters to each

segment of 328ft twisted pair cabling; this is often insufficient and to costly in multi-

story buildings. Fortunately, the Enable-IT 850 CPE Series Extended Ethernet can

push the reach of Ethernet to more than (20) twenty times the typical Ethernet

distance over a 1-pair Telco wiring infrastructure or better.

A simple design methodology would be to think of the 850 CPE extending a standard

Ethernet line up to 8,000 (2,440m) with a (4) Port 10/100 Ethernet switch and can also

include dual voice lines simultaneously.

To increase the durability and extended use of the product providing maximum future

technology protection, 850 CPE Extended Ethernet Unit meets the challenge of modern

switched LANs and allows you to add features and capacity as your network expands.

The Enable-IT 850 CPE Extended Ethernet has been tested to provide full duplex

transport up to 90MB/s over CAT2, and up to 100MB/s over CAT5e cabling.

Up to 700ft (200m) -100Mbps

700ft (200m) to 1,350ft (400m) - 90Mbps

1,350ft (400m) to 1,970ft (600m) - 70Mbps

1,970ft (600m) to 2,625ft (800m) - 52Mbps

2,625ft (800m) to 3,280ft (1000m) - 42Mbps

3,300ft (1005m) to 6,000(1,828m) - 30Mbps

6,000ft(1,828m) to 8,000(2,440m) -15Mbps

* Actual data rate will vary on the quality of the copper wire, twisted pair and environmental factors

Unit Model

Wiring

LAN Data Rate

Max. Distance

850 CPE (1) pair CAT 2 up to CAT5e 100Mbps FD 8,000ft / 2,440m

Page 6 of 13 Ethernet Extension Experts

Key Benefits

The following list identifies the 850 CPE Extended Ethernet Unit key benefits.

•Dramatic cost reduction over any competing technology and includes a (4) Port

10/100 LAN switch on each end.

•Broadband technology that delivers in-building Ethernet access over 1 pair of

existing Category 2 up to Category 5e wiring up to 8,000’, whether spare or

actively in use for analog or digital voice. This means no new wiring is required.

•Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and

virtual private networking.

•Rapid installation with small box profile, no programming and no firmware to

upgrade.

•Low profile box with dual POTS line and Ethernet data all in a single RJ-11

Ethernet jack (Interlink port).

•Quad switched LAN RJ-45 10/100 Ethernet ports for expansion without adding a

hub or switch on each end.

Summary of Features

The Enable-850 CPE Extended Ethernet has the following hardware features:

•Extended Ethernet line over existing CAT 2 up to CAT5e / CAT6 wiring

•Uses RJ-11 Interlink port for transport (Dual voice, 100Mbps data and native PoE)

•Rapid Telco style installation – no programming required

•Supports digital VoD channels and Maintains existing telephone (lifeline POTS)

•Drives Ethernet 100 Mbps full-duplex service delivery with quad LAN switch, dual voice

up to 8,000ft or 2,440m - can also transport PoE up to 1,500ft natively.

•Network Equipment independence – Transparent to protocols/applications/MAC

Specifications: Functionality:

Power Indicator Data Rates 100Mbps Full Duplex

100Mbps Link status/Activity Full Duplex/Half Duplex status/Collisions

VDSL2 Link Status/Activity Protocol independent

Dimensions: 850 CPE Interlink port pins:

Height: 1” (25mm) Pins 1 & 2 – Voice line 1 and Data

Depth: 3.5” (90mm) Pins 3 & 4 – Voice line 2 and Data

Width: 6” (152.4mm)

Environment

Operating temp: -49°F to 168°F (-45°to 76°C) Interfaces

Storage temp: -49°F to 168°F (-45°to 76°C) (1) 5v 2A DC Power Adapter 2.5mm

Humidity 5% to 95%, non-condensing (1) RJ-11 Interlink Port

(1) RJ-11 Phone Port

(4) RJ-45 100MB LAN Auto negotiate

Page 7 of 13 Ethernet Extension Experts

Typical Use Applications

Enable-IT 850 CPE Extended Ethernet Units are usually installed into telephone wiring

infrastructures where extension of backbone services is required and expensive fiber

options are prohibitive. The 850 CPE Extended Ethernet Units allow a standard

Ethernet segment to be deployed quickly over existing 1 pair Telco Copper Wiring in

combination with existing POTS voice signals. The 850 CPE Interlink port (RJ-11

interface) carries this 1-pair signaling over the RJ-11 pins (1 & 2) - used for transport for

both voice and data. If you use more than 1-pair of wiring such as a CAT5 segment, the

RJ-45 pins (3 & 6) are used for Voice line 2 and the remaining pins 4,5,7 & 8 can

transport native 802.3af PoE or are unused.Quad LAN RJ-45 10/100 autosensing ports

allow the use of LAN devices without adding an Ethernet hub or switch to either end.

Installers have the convenience of a 100Mbps LAN Ethernet unit for peace of mind

connectivity and no device maintenance. Rapid installation allows for minimal

interruption and the Broadband technology allows for investment protection up to 10 -15

years with no firmware or replacement issues. Bandwidth can be scaled according to

the Broadband Access Provider needs. The 850 CPE Extended Ethernet Unit is a

passive device so interruption of Internet service does not affect POTS services.

Carriers and Access Providers can came and go, but the 850 CPE Extended Ethernet

Unit technologies continue to provide lasting value such as the other utilities like Water,

gas and electricity.

The Enable-IT 850 CPE Extended Ethernet Unit is suited for the following key environments:

•Commercial Buildings (Multi-Tenant Units)

•Business Parks (Multi-Tenant Units)

•Apartments (Multi-Residential Units)

•Hotels (Multi-Hospitality Units)

•Business Suites (Multi-Hospitality Units)

•School Campuses (University, K-12)

•College Housing (Multi-Residential Units)

•Mining Operations – Quarries, Mine shafts

•Nautical Infrastructure – Cruise ships, Marinas, dive operations, subs

•Video Surveillance/Security

•WiFi Deployment – ISP’s, RV Parks, Construction sites

•Manufacturing – Foundries, pharmaceutical, aerospace, automotive,

petroleum, concrete plants, etc.

•Retail POS – Department stores, Bars, restaurants, retail spaces

•Government – Naval ships, FEMA, Housing, USGS, National Parks, Forestry,

Research stations, NASA, utilities, etc.

•Education – outdoor camps, college campuses

•Healthcare – Hospitals, elder care, outpatient facilities

•Entertainment – Movie theaters, home entertainment, fairs, outdoor venues

Page 8 of 13 Ethernet Extension Experts

INSTALLING THE 850 CPE EXTENDED ETHERNET

The Enable-IT 850 CPE Extended Ethernet Units have a distance restriction of 8,000ft or

2,440m over 1-pair of Category 2 up to Category 5e / CAT6 wiring from device extension

to device extension. Therefore quick, simple site surveys and installation planning are

highly recommended.

This chapter describes the recommended installation process for the Enable-IT 850 CPE

Extended Ethernet Unit. It covers the following topics:

•Site Plan – Installation Design Considerations

•Unpacking the Enable-IT 850 CPE Ethernet Extender

•Perform an out of the box Test

•Performing the On-Site Installation

Site Plan - Installation Design Considerations

The planning process should involve a site walkthrough and discovery survey. Electrical

Cable measurement tools are the most reliable method to determine the longest run of

hidden wiring. Estimate the best locations to position the Broadband Concentrators to

adequately reach desired connectivity on each floor. Document your findings to use in

designing a network topology to support the Ethernet Switches and backbone

connectivity. Key points to remember in the Site Survey.

•Total distance limitation of 8,000ft or 2,440m from end to end.

•1 Pair CAT-2 wiring or better cabling is required for the 850 CPE Interlink

transmission.

The 850 CPE Interlink port (RJ-11 interface) carries this 1-pair signaling over the RJ-

11 pins (1 & 2) - used for transport for both voice and data. If you use more than 1-

pair of wiring such as a CAT5 segment, the RJ-45 pins (3 & 6) are used for Voice

line 2 and the remaining pins 4,5,7 & 8 are can transport native PoE or are unused.

Unpacking the Enable-IT 850 CPE Extended Ethernet

Carefully remove the Enable-IT 850 CPE Extended Ethernet units all packing materials

from the box. Verify that the items listed below are present. Make sure that the

equipment supplied matches what you ordered. If any items are missing or damaged,

please contact Enable-IT or your distributor for assistance.

•(1) The Enable-IT 850 CPE Extended Ethernet Units

o5v AC/DC Country Specific Power adapter

oTelephone patch cord

•(1) Enable-IT 850 CPE Extended Ethernet User Manual (this manual)

850 CPE

850 CO

Page 9 of 13 Ethernet Extension Experts

Perform an out of the box Test

We highly recommend a quick test to ensure the working order of you 850 CPE

units. To do this, please use one of the Telephone patch cords provided and

attach to the 850 CPE Interlink port and then to the 8950 DSLAM Interlink port.

Power up both 850 CPE units and the 8950 DSLAM Concentrator. The Green Sync

LEDs will start flickering slowly and then fast as the units talk to eachother. After

a few seconds you should see a solid Green Interlink Sync LED on each 850 CPE

unit to confirm a link is established. The 8950 DSLAM will take about 30 seconds

to startup then link will be established with the 850 CPE. This confirms basic

proper operation of the units. Next for a more detailed test and to confirm your

LAN Equipment works with the 850 CPE, connect your Ethernet LAN to the 8950

DSLAM and remote device to the 850 CPE LAN ports and test connectivity. The

Green Interlink Sync LED will pulse rapidly as it detects traffic.



LED indicators will provide visual operational status of the 850 CPEunits.

Sync - Slow to fast flicker on power up – indicates negotiation of a link.

Solid Green LED indicates link established and rapid pulse is traffic.

Pwr - Solid Green LED indicates that both units are receiving 5v power.

Mode - Solid Yellow LED on CPE unit only – No LED lit on CO

ACT - Yellow LEDs – Lit solid indicates the presence of local LAN

– Blinking indicates the presence of local LAN traffic

Performing the On-Site Installation

After removing the Enable-IT 850 CPE Extended Ethernet from the box and performing

the out of the box testing all that remains to install the unit on-site is to mount the unit,

build the interconnect wiring, add voice lines if needed and attach the LAN device

cabling with the provided Ethernet Patch cords.

Building the 850 CPE Interlink wiring

The most important aspect of the install is the correct wiring of the Interlink cabling.

You have the option of using RJ-11 blank male heads for this cabling.

For all wiring you will need to crimp a RJ-11 to each end of the contiguous wire run

and using the following pins (1 & 2) straight through. This will deliver 1 Voice line,

Ethernet Data. Insert the completed RJ-11 ends into the 850 CPE Interlink port on

each 850 CPE unit and to the 8950 DSLAM Concentrator.

The 850 CPE Interlink port (RJ-11 interface) carries this 1-pair signaling over the RJ-

11 pins (1 & 2) - used for transport for both voice and data. If you use more than 1-

pair of wiring such as a CAT5 segment, the RJ-45 pins (3 & 6) are used for Voice

Page 10 of 13 Ethernet Extension Experts

line 2 and the remaining pins 4,5,7 & 8 are can transport native PoE or are unused.

Attaching cabling and devices to the Enable-IT 850 CPE Extended Ethernet.

Attach your remote LAN device to the 850 CPE unit LAN ports with Ethernet patch

cord provided. Attach your local LAN to the 8950 DSLAM LAN ports with Ethernet

patch cord provided. Attach the power adapter to the 850 CPE units and power

supply to the 8950 DSLAM. Your equipment should now be powered up and

functioning.

LED indicators will provide visual operational status of the 850 CPE units.

Sync - Slow to fast flicker on power up – indicates negotiation of a link.

Solid Green LED indicates link established and rapid pulse is traffic.

Pwr - Solid Green LED indicates that both units are receiving 5v power.

Mode - Solid Yellow LED on CPE unit only – No LED lit on CO

ACT - Yellow LEDs – Lit solid indicates the presence of local LAN

– Blinking indicates the presence of local LAN traffic

For troubleshooting, first examine the backbone wiring pair and make sure you have solid

connections. The Interlink Sync LED will be lit solid Green with rapid pulsing on each 850

CPE unit to show proper connection and pairing. If the Interlink Sync LED Link is flashing

slow to fast and never goes solid …. Then follow the steps below:

1) Make sure your wiring is straight through and not connected to any Telco punch

down block; If so remove from the block and use Telco butt clips to bridge wire.

2) Check for a firm connection of the RJ-11 connections in each 850 CPE

unit and 8950 DSLAM, and power is applied to both the DSLAM and CPE units.

3) You can easily isolate any issue by performing an out of the box test confirm either the 850 CPE

or your wiring. It is possible an outside interference has been introduced into your wiring.

Performance Settings

A DIP Switch is provided on the left side of each unit for setting line

performance attributes.

If the Interlink cabling is more than

1,900ft / 580m – Set DIP Switch 3 up

For 17a mode. This optimizes

faster symmetrical throughput at higher

distances.

If the Interlink cabling is less than 1,900ft

580m - the DIP switch 3 must be down For 30a mode

(set to ON) position for the unit to work properly.

Technical Support

Enable-IT OEM Technical Support is available directly to customers and distributors. All

support requests are processed through the online support portal. This allows us to provide

assigned support ticket numbers in order to bring closure to any technical issues.

Default DIP settings

850 CPE – All down set in the ON position

850 CO – DIP position 1 up (OFF)

DIPs 2-4 down (ON)

DIP 1 – CO/CPE mode

DIP 2 – Fast/Interleave mode

DIP 3 – 30a/17a mode – short distance or

long distance mode

DIP 4 – 6dB/9dB – 9dB mode cleans up the

signal noise ratio on the telephone wiring

Andere Handbücher für 850 CPE

Inhaltsverzeichnis

Andere Enable-IT Extender Handbücher

Enable-IT

Enable-IT 828W Bedienungsanleitung

Enable-IT

Enable-IT 860 Pro Rev B Bedienungsanleitung

Enable-IT

Enable-IT 865Q PRO Bedienungsanleitung

Enable-IT

Enable-IT 860C Bedienungsanleitung

Enable-IT

Enable-IT 860W PRO Bedienungsanleitung

Enable-IT

Enable-IT 821W Bedienungsanleitung

Enable-IT

Enable-IT 860 Series Bedienungsanleitung

Enable-IT

Enable-IT 821C Bedienungsanleitung

Enable-IT

Enable-IT 850 CPE Bedienungsanleitung

Enable-IT

Enable-IT 821WP Bedienungsanleitung

Enable-IT

Enable-IT 865Q PRO Bedienungsanleitung

Enable-IT

Enable-IT 865XC PRO Bedienungsanleitung

Enable-IT

Enable-IT 865 PTZQ PRO Bedienungsanleitung

Enable-IT

Enable-IT 865XS PRO Bedienungsanleitung

Enable-IT

Enable-IT 868 Bedienungsanleitung

Enable-IT

Enable-IT 860WC PRO Bedienungsanleitung

Enable-IT

Enable-IT 850 Bedienungsanleitung

Enable-IT

Enable-IT 865W PRO Bedienungsanleitung

Enable-IT

Enable-IT 865 Q PRO Bedienungsanleitung

Enable-IT

Enable-IT 870 CPE Bedienungsanleitung

Enable-IT

Enable-IT 868 PRO Bedienungsanleitung

Enable-IT

Enable-IT 865QW PRO Bedienungsanleitung

Enable-IT

Enable-IT 850 CPE Bedienungsanleitung

Enable-IT

Enable-IT 865XSC PRO Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung