Enable-IT 860C Bedienungsanleitung

Ethernet Extension Experts

Enable-IT 860C

Ethernet Extender Kit

User Manual



Page 2 of 14 Ethernet Extension Experts

may be reproduced in any form or by any means or used to make any derivative work (such

as translation, transformation, or adaptation) without written permission from Enable-IT, Inc.

Enable-IT, Inc reserves the right to revise this documentation and to make changes in

content from time to time without obligation on the part of Enable-IT, Inc to provide

notification of such revision or change.

Enable-IT, Inc provides this documentation without warranty, term, or condition of any kind,

either implied or expressed, including, but not limited to, the implied warranties, terms or

conditions of merchantability, satisfactory quality, and fitness for a particular purpose.

Enable-IT, Inc may make improvements or changes in the product(s) and/or the

program(s) described in this documentation at any time.

If there is any software on removable media described in this documentation, it is furnished

under a license agreement included with the product as a separate document, in the hard

copy documentation. If you are unable to locate a copy, please contact Enable-IT, Inc and a

copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND

If you are a United States government agency, then this documentation and the software

described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at

private expense. Software is delivered as "Commercial Computer Software" as defined in

DFARS 252.227-7014 (June 1995) or as a "commercial item" as defined in FAR 2.101 (a)

and as such is provided with only such rights as are provided in Enable-IT, Inc's standard

commercial license for the Software.

Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov

1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not to remove or

deface any portion of any legend provided on any licensed program or documentation

contained in, or delivered to you in conjunction with, this User Guide.

Unless otherwise indicated, Enable-IT, Inc registered trademarks are registered in the

United States and may or may not be registered in other countries

Page 3 of 14 Ethernet Extension Experts

CONTENTS

ABOUT THIS GUIDE 4

1 INTRODUCING THE ENABLE-IT 860 ETHERNET EXTENDER KIT 5

About the 860 Rev E Ethernet Extender Kit 5

Key Benefits 6

Summary of Features 6

Typical Use Applications 7

2 INSTALLING THE ENABLE-IT 860 ETHERNET EXTENDER UNITS 8

Site Plan – Installation Design Considerations 8

Unpacking the 860 Ethernet Extender Kit 9

Perform an out of the box Test 9

Performing the On-Site Installation 9

Mounting the 860 Ethernet Extender Kit 10

Building the 860 Interlink wiring 10

Attaching cabling and devices 10

Troubleshooting & Performance Settings (DIP switch) 11

3 TECHNICAL SUPPORT

Online Technical Services 11

World Wide Web Site 11

Returning Products for Repair 11

4ENABLE-IT INC.LIMITED WARRANTY 12

5CONTACT US 14

Page 4 of 14 Ethernet Extension Experts

ABOUT THIS GUIDE

This guide provides all the information needed to install and use the Enable-IT

860 Ethernet Extender Kit. This guide is intended for use by technicians who are

responsible for installing and setting up network equipment. Consequently, it is

assumed that the installer has a basic working knowledge of LANs (Local Area

Networks) and voice telecom wiring.

If the information in the release notes that are shipped with your product differs

from the information in this guide, follow the instructions in the release notes.

Most user guides and release notes are available in Adobe Acrobat

Reader Portable Document Format (PDF) or HTML on the Enable-IT World Wide

Web site: http://www.ethernetextender.com/manuals/860C Manual.pdf

Page 5 of 14 Ethernet Extension Experts

INTRODUCING THE 860CETHERNET EXTENDER KIT

Congratulations on purchasing the Enable-IT’s 860C Ethernet Extender Kit — the

simplest method to stretch your broadband solutions for in-building deployment in

commercial office buildings, hotels, and multi-tenant residential units.

The 860C Extended Ethernet Unit offers the Lowest Cost Solution in a simple design for

rapid install using existing RG58/RG6 coaxial cable and 2-pair Category wiring or better.

This chapter contains introductory information about the 860C Extended Ethernet Unit

and how it can be used in your network. It covers the following topics:

•About the 860C Extended Ethernet Unit

•Key Benefits

•Summary of Features

•Typical Applications

About the 860C Extended Ethernet Kit

The 860C Extended Ethernet Kit solves the problem of high costs associated with

stretching your backbone with traditional fiber or a series of hubs/repeaters.

In many office buildings, preferred network access is a dedicated Ethernet line,

however Ethernet over twisted pair wiring has its distance limitations of just 328 ft. In

order to drive Ethernet signal further, one would have to add repeaters to each

segment of 328ft twisted pair cabling; this is often insufficient and to costly in multi-

story buildings. Fortunately, the Enable-IT 860C Series Extended Ethernet can push

the reach of Ethernet to more than (20) twenty times the typical Ethernet distance

over RG58/RG6 coaxial cabling and 2-pair Category wiring infrastructure or better.

A simple design methodology would be to think of the 860C extending a standard

Ethernet line up to 6,000 (1,828m) with a (4) Port 10/100 Ethernet switch and can also

include dual voice lines simultaneously.

To increase the durability and extended use of the product providing maximum future

technology protection, 860C Extended Ethernet Unit meets the challenge of modern

switched LANs and allows you to add features and capacity as your network expands.

The Enable-IT 860C Extended Ethernet has been tested to provide full duplex transport

up to 100MB/s over CAT5e cabling or BNC coaxial cabling.

Up to 1,313ft (400m) - 100Mbps

1,400ft (426m) to 2,624ft (800m) - 90Mbps

Up to 6,000ft (1,828m) - 40Mbps

* Actual data rate will vary on the quality of the copper wire, twisted pair and environmental factors

Unit Model

Wiring

LAN Data Rate

Max. Distance

860 (2) pair CAT 3 up to CAT 6 100Mbps FD 6,000ft / 1,828m

Page 6 of 14 Ethernet Extension Experts

Key Benefits

The following list identifies the 860C Extended Ethernet Unit key benefits.

•Dramatic cost reduction over any competing technology and includes a (4) Port

10/100 LAN switch on each end.

•Broadband technology that delivers in-building Ethernet access over 2 pair of

existing UTP Category 3, 4, 5, 5e or 6 wiring up to 6,000’, whether spare or

actively in use for analog or digital voice. This means no new wiring is required.

•Provides one scalable infrastructure for Internet access, POTS, VoIP, video, and

virtual private networking.

•Rapid installation with small box profile, no programming and no firmware to

upgrade.

•Low profile box with dual POTS line and Ethernet data all in a single RJ-45

Ethernet jack (Interlink port).

•Quad switched LAN RJ-45 10/100 Ethernet ports for expansion without adding a

hub or switch on each end.

Summary of Features

The Enable-IT 860C Extended Ethernet Kit has the following hardware features:

•Extended Ethernet line over existing CAT 3 up to CAT5e / CAT6 wiring

•Uses RJ-45 Interlink port for transport (Dual voice, 100Mbps data and PoE)

•BNC Coaxial Interlink port for 100Mbps data and PoE

•Rapid Telco style installation – no programming required

•Supports digital VoD channels and Maintains existing telephone (lifeline POTS)

•Drives Ethernet 100 Mbps full-duplex service delivery with quad LAN switch, dual voice

up to 6,000ft or 1,829m - can also transport PoE up to 1,500ft natively.

•Network Equipment independence – Transparent to protocols/applications/MAC

Specifications: Functionality:

Power Indicator Data Rates 100Mbps Full Duplex

100Mbps Link status/Activity Full Duplex/Half Duplex status/Collisions

VDSL2 Link Status/Activity Protocol independent

Dimensions: 860 Interlink port pins:

Height: 1.5" (38mm) Pins 1 & 2 – Voice line 1 and Data

Depth: 3.75" (95mm) Pins 3 & 6 – Voice line 2(optional)

Width: 5.75” (146mm) Pins 4 & 5 – optional support for PoE

Pins 7 & 8 – optional support for PoE

Environment

Operating temp: -49°F to 168°F (-45°to 76°C) Interfaces

Storage temp: -49°F to 168°F (-45°to 76°C) (1) 5v 2A DC Power Adapter 2.1mm

Humidity 5% to 95%, non-condensing (1) BNC Coaxial Interlink Port

(4) RJ-45 100MB LAN Auto negotiate

Page 7 of 14 Ethernet Extension Experts

Typical Use Applications

Enable-IT 860C Extended Ethernet Units are usually installed into telephone wiring

infrastructures where extension of backbone services is required and expensive fiber

options are prohibitive. The 860C Extended Ethernet Units allow a standard Ethernet

segment to be deployed quickly over existing 2-pair Category Copper Wiring in

combination with existing POTS voice signals. The 860C Interlink port (RJ-45 interface)

carries this 2-pair signaling over the RJ-45 pins (1, 2, 3, & 6) - used for transport for both

voice and data. The remaining pins 4, 5, 7, & 8 can transport native 802.3af PoE or are

unused.Quad LAN RJ-45 10/100 autosensing ports allow the use of LAN devices

without adding an Ethernet hub or switch to either end. Provided are two BNC Coaxial

Interlink ports for use with RG58/RG6 coaxial cabling.

Installers have the convenience of a 100Mbps LAN Ethernet unit for peace of mind

connectivity and no device maintenance. Rapid installation allows for minimal

interruption and the Broadband technology allows for investment protection up to 10 -15

years with no firmware or replacement issues. Bandwidth can be scaled according to

the Broadband Access Provider needs. The 860C Extended Ethernet Unit is a passive

device so interruption of Internet service does not affect POTS services. Carriers and

Access Providers can come and go, but the 860C Extended Ethernet Unit technologies

continue to provide lasting value such as the other utilities like water, gas and electricity.

The Enable-IT 860C Extended Ethernet Unit is suited for the following key environments:

•Commercial Buildings (Multi-Tenant Units)

•Business Parks (Multi-Tenant Units)

•Apartments (Multi-Residential Units)

•Hotels (Multi-Hospitality Units)

•Business Suites (Multi-Hospitality Units)

•School Campuses (University, K-12)

•College Housing (Multi-Residential Units)

•Mining Operations – Quarries, Mine shafts

•Nautical Infrastructure – Cruise ships, Marinas, dive operations, subs

•Video Surveillance/Security

•WiFi Deployment – ISP’s, RV Parks, Construction sites

•Manufacturing – Foundries, pharmaceutical, aerospace, automotive,

petroleum, concrete plants, etc.

•Retail POS – Department stores, Bars, restaurants, retail spaces

•Government – Naval ships, FEMA, Housing, USGS, National Parks, Forestry,

Research stations, NASA, utilities, etc.

•Education – outdoor camps, college campuses

•Healthcare – Hospitals, elder care, outpatient facilities

•Entertainment – Movie theaters, home entertainment, fairs, outdoor venues

Page 8 of 14 Ethernet Extension Experts

INSTALLING THE 860CEXTENDED ETHERNET KIT

The Enable-IT 860C Extended Ethernet Units have a distance restriction of 6,000ft or

1,828m over 2-pair of Category 3 up to Category 5e / CAT6 wiring from device extension

to device extension. Therefore quick, simple site surveys and installation planning are

highly recommended.

This chapter describes the recommended installation process for the Enable-IT 860C

Extended Ethernet Unit. It covers the following topics:

•Site Plan – Installation Design Considerations

•Unpacking the Enable-IT 860C Extended Ethernet Kits

•Perform an out of the box Test

•Performing the On-Site Installation

Site Plan - Installation Design Considerations

The planning process should involve a site walkthrough and discovery survey. Electrical

Cable measurement tools are the most reliable method to determine the longest run of

hidden wiring. Estimate the best locations to position the Broadband Concentrators to

adequately reach desired connectivity on each floor. Document your findings to use in

designing a network topology to support the Ethernet Switches and backbone

connectivity. Key points to remember in the Site Survey.

•Total distance limitation of 6,000ft or 1,829m from end to end.

•BNC Coaxial RG58/RG6 cabling, 2 Pair CAT-3 wiring, 4-pair Cat5e .30 Gage or

better cabling is required for the 860C Interlink transmission.

For the Interlink wiring you can use either RJ-45 or BNC Coaxial connectors. Crimp

a RJ-45 Male Head to each end of the contiguous wire run and using the following

pins (1 & 2) straight through. This will deliver 1 Voice line, Ethernet Data. If you

desire to use the second voice line, you can also use pins (3 & 6) on each end

straight through.

The 860C Interlink port (BNC Coax interface) carries this 2-pair signaling over the

RG58/RG6 pins (1, 2, 3 & 6) - used for transport for both voice and data. The

remaining pins 4, 5, 7 & 8 are can transport native PoE or are unused. BNC Coaxial

Interlink ports are provided for use with RG58/RG6 coaxial cabling.

860 CPE

860 CO

Page 9 of 14 Ethernet Extension Experts

Unpacking the Enable-IT 860C Extended Ethernet Kit

Carefully remove the Enable-IT 860C Extended Ethernet Kits all packing materials from

the box. Verify that the items listed below are present. Make sure that the equipment

supplied matches what you ordered. If any items are missing or damaged, please

contact Enable-IT or your distributor for assistance.

•(2) The Enable-IT 860C Extended Ethernet Units (CO & CPE)

o5v AC/DC Country Specific Power adapter

o10’ Black Ethernet LAN patch cables

•(1) Enable-IT 860C Extended Ethernet Kit User Manual (this manual)

Perform an out of the box Test

We highly recommend a quick test to ensure the working order of you 860C units.

To do this, please use one of the Ethernet patch cords provided and attach to the

860C Interlink port of each 860C unit. Power up both 860C units. The Green Sync

LEDs will start flickering slowly and then fast as the units talk to eachother. After

a few seconds you should see a solid Green Interlink Sync LED on each unit to

confirm a link is established. This confirms basic proper operation of the units.

Next for a more detailed test and to confirm your LAN Equipment works with the

860C, connect your Ethernet LAN and remote device to the 860C LAN ports and

test connectivity. The Green Interlink Sync LED will pulse rapidly as it detects

traffic.



LED indicators will provide visual operational status of the 860C units.

Sync - Slow to fast flicker on power up – indicates negotiation of a link.

Solid Green LED indicates link established and rapid pulse is traffic.

Pwr - Solid Green LED indicates that both units are receiving 5v power.

Mode - Solid Yellow LED on CPE unit only – No LED lit on CO

ACT - Yellow LEDs – Lit solid indicates the presence of local LAN

– Blinking indicates the presence of local LAN traffic

Performing the On-Site Installation

After removing the Enable-IT 860C Extended Ethernet Kit from the box and performing

the out of the box testing all that remains to install the unit on-site is to mount the unit,

build the interconnect wiring, add voice lines if needed and attach the LAN device

cabling with the provided Ethernet Patch cords.

Page 10 of 14 Ethernet Extension Experts

Mounting the Enable-IT 860C Extended Ethernet Units

The Enable-IT 860C Extended Ethernet Kits are designed for quick wall mounting.

Choose a location to mount each of the Enable-IT 860C’s where the maximum

distance does not exceed 6,000ft or 1,829m total between devices to be connected.

When wall-mounting the Enable-IT 860C Extended Ethernet Kit it is recommended

that you use the appropriate screw anchors for your mounting surface. If mounting

on existing plywood use wood screws; if mounting onto drywall or sheetrock, use

plastic drywall anchors to secure your installation.

Building the 860C Interlink wiring

The most important aspect of the install is the correct wiring of the Interlink cabling.

For the Interlink wiring you can use either RJ-45 or BNC Coaxial connectors. Crimp

a RJ-45 Male Head to each end of the contiguous wire run and using the following

pins (1 & 2) straight through. This will deliver 1 Voice line, Ethernet Data. If you

desire to use the second voice line, you can also use pins (3 & 6) on each end

straight through.

The 860C Interlink port (BNC Coax Interface) carries this 2-pair signaling over the

RG58/RG6 pins (1, 2, 3 & 6) - used for transport for both voice and data. The

remaining pins 4, 5, 7 & 8 are can transport native PoE or are unused. BNC Coaxial

Interlink ports are provided for use with RG58/RG6 coaxial cabling.

The 860 Interlink port (RJ-45 interface) carries this 1-pair signaling over the RJ-45

pins (1 & 2) - used for transport for both voice and data. If you use more than 1-pair

of wiring such as a CAT5 segment, the RJ-45 pins (3 & 6) are used for Voice line 2

and the remaining pins 4,5,7 & 8 are can transport native PoE or are unused.

Attaching cabling and devices to the Enable-IT 860C Extended Ethernet Kit.

Attach your remote LAN device to the 860C CPE unit LAN ports with Ethernet patch

cord provided. Attach your local LAN to the 860C CO LAN ports with Ethernet patch

cord provided. Attach the power adapters to both 860C units. Your equipment

should now be powered up and functioning.

LED indicators will provide visual operational status of the 860C units.

Sync - Slow to fast flicker on power up – indicates negotiation of a link.

Solid Green LED indicates link established and rapid pulse is traffic.

Pwr - Solid Green LED indicates that both units are receiving 5v power.

Mode - Solid Yellow LED on CPE unit only – No LED lit on CO

ACT - Yellow LEDs – Lit solid indicates the presence of local LAN

– Blinking indicates the presence of local LAN traffic

860 CPE

860 CO

Inhaltsverzeichnis

Andere Enable-IT Extender Handbücher

Enable-IT

Enable-IT 821CW Bedienungsanleitung

Enable-IT

Enable-IT 824C Bedienungsanleitung

Enable-IT

Enable-IT 860 W PRO Bedienungsanleitung

Enable-IT

Enable-IT 865QW PRO Bedienungsanleitung

Enable-IT

Enable-IT 895 Series Bedienungsanleitung

Enable-IT

Enable-IT 860XW PRO Bedienungsanleitung

Enable-IT

Enable-IT 850 CPE Bedienungsanleitung

Enable-IT

Enable-IT 8955M Bedienungsanleitung

Enable-IT

Enable-IT 828 Bedienungsanleitung

Enable-IT

Enable-IT Pro 860C Bedienungsanleitung

Enable-IT

Enable-IT 850 CPE Bedienungsanleitung

Enable-IT

Enable-IT 865XS PRO Bedienungsanleitung

Enable-IT

Enable-IT 821C Bedienungsanleitung

Enable-IT

Enable-IT 865 PRO Bedienungsanleitung

Enable-IT

Enable-IT 868 PRO Bedienungsanleitung

Enable-IT

Enable-IT 860 XS PRO Bedienungsanleitung

Enable-IT

Enable-IT 360 Bedienungsanleitung

Enable-IT

Enable-IT 865 PTZQ PRO Bedienungsanleitung

Enable-IT

Enable-IT 860X PRO Bedienungsanleitung

Enable-IT

Enable-IT 860WC PRO Bedienungsanleitung

Enable-IT

Enable-IT 821W Bedienungsanleitung

Enable-IT

Enable-IT 828W Bedienungsanleitung

Enable-IT

Enable-IT 820P Pro Bedienungsanleitung

Enable-IT

Enable-IT 828 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung