Encore ENUTV-2 Series Bedienungsanleitung
Personal
V
ideo
Recorder
ENUTV-2
(USB TV Capture Box)
ENUTV-2
Series
User
’
s
Guide
2
ENUT
V
-
2
Use
r
’
s
Guide
-
User
’s
Notice
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in
any form or by any means, except documentation kept by the purchaser for backup purposes,
without the express written permission of us.
WE PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS
OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL US, ITS DIRECTORS,
OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS, LOSS
OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS),
EVEN IF WE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by us; or (2) the serial
number of the product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’benefit, without intent infringe.
Windows, MS-DOS, and DirectX are registered trademarks of Microsoft Corporation.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
The product name and revision number are both printed on the product itself. Manual revisions are
released for each product design represented by the digit before and after the period of the manual
revision number. Manual updates are represented by the third digit in the manual revision number.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS
MANUAL ARE FURNISHED FOR INFORMATION USE ONLY, AND ARE SUBJECT TO
CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A
COMMITMENT BY US. WE ASSUME NO RESPONSIBILITY OR
LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright Encore Electronics © 2007 .All Rights Reserved.
3
ENUT
V
-
2
Use
r
’
s
Guide
-
Chapter 1: Introduction …………………………………………………………………………….4
1.1 Package Contents................................................................................................................. 4
1.2 System Requirements........................................................................................................... 4
Chapter 2: Getting Started ................................................................................................................. 5
2.1 Connect USB ENUTV-2...................................................................................................... 5
2.2 Device Driver Installation.................................................................................................... 5
2.3 Install the DirectX®............................................................................................................. 7
2.4 Install the ENUTV-2 Utility Software................................................................................. 9
Chapter 3: Launch the ENUTV-2 Program...................................................................................... 11
3.1 Running the ENUTV-2 for the first time........................................................................... 11
3.2 Watch TV programs or movies from DVD/VCR/Camcorder............................................ 12
3.3 Record Video ..................................................................................................................... 13
3.4 Snapshot Image.................................................................................................................. 14
3.5 Playback Video .................................................................................................................. 14
3.6 Browse Image .................................................................................................................... 16
Chapter 4: Using the Remote Control.............................................................................................. 17
Chapter 5: Technical Support:.......................................................................................................... 18
4
ENUT
V
-
2
Use
r
’
s
Guide
-
Chapter
1:
Introduction
1.1 Package Contents
Upon receiving your ENUTV-2, please make sure the following items are included in the
package.
•ENUTV-2
•Driver CD
•Remote Control
•USB Cable
•Quick Guide
1.2 System Requirements
•IBM PC or compatible
•P4 1.6 (for Preview); P4 2.4 or above(Mpeg 4 need 2.8) (for Record)
•Minimum 128 MB memory (256MB is better)
•Minimum 100 MB hard disk space available
•VGA and with DirectDraw driver supporting 16 bit color or higher
•One free USB2.0 slot
•Microsoft Windows
®
7 / XP / Windows Vista
TM
•CD-ROM drive
5
ENUT
V
-
2
Use
r
’
s
Guide
-
Chapter
2: Getting St
arted
2.1 Connect USB ENUTV-2
To install the ENUTV-2 into your computer, follow the steps below:
1.
Connect the antenna cable to the “TV”
connector.
2.
Connect the Device to PC USB Hub.
2.2 Device Driver Installation
1. Once you connect ENUTV-2 to the USB
port, you can just follow the system’s
prompted messages to finish the driver
installation.
2. When you insert ENUTV-2, system will
show the “Found New Hardware”
dialogue box.
3. Insert “Driver & Utilities” CD into
CD-ROM(or DVD-ROM), and click
“Setup Driver” button to setup the driver.
6
ENUT
V
-
2
Use
r
’
s
Guide
-
4. Click “Next” button.
5. Click “Install” button.
6. Click “Next” button.
7. Wait Installation Wizard copying
necessary driver files onto your
system.
7
ENUT
V
-
2
Use
r
’
s
Guide
-
8. Click “Continue Anyway” button.
9. Click “Finish” button.
10.Click “Finish” button again to complete
installation.
2.3 Install the DirectX®
Microsoft DirectX® allows 3D hardware acceleration support in Windows® 98, 2000,
Windows® XP. For software MPEG support in Windows 98, you must first install Microsoft
DirectX®, and then an MPEG compliant video player. Follow the installation steps below to
install Microsoft DirectX®.
8
ENUT
V
-
2
Use
r
’
s
Guide
-
1. Insert the installation CD into the
CD-ROM drive. The setup screen will
automatically appear.
2. Click the “DirectX” button.
3. Click “Accept the agreement” radio button
then click “Next”
4. Click “Next” to confirm the installation of
DirectX
5. Click “Finish”
NOTE:
The computer will automatically restart.
Please close all programs if any and save
files if needed before hitting the “Finish”
button.
9
ENUT
V
-
2
Use
r
’
s
Guide
-
2.4 Install the ENUTV-2 Utility Software.
1. Click “Setup Utility” to begin installing TV
application.
2. Click “Next” button to start installing.
3. Please read the License Agreement and
click “Next” to begin copying files.
10
ENUT
V
-
2
Use
r
’
s
Guide
-
4. Click “Next” or choose setup folder for
installation.
5. Then click “Finish” to complete the
installation of ENUTV-2.
6. Select the “Yes, I want to restart my
computer now” and click the “OK” to
restart your computer.
Andere Handbücher für ENUTV-2 Series
1
Inhaltsverzeichnis
Andere Encore DVR Handbücher
