Endress+Hauser CCS120 Bedienungsanleitung

BA388C/07/en/07.06

51517372

Operating Instructions

CCS120

Sensor for total chlorine

Brief overview

Here is how to use these Operating Instructions to commission your sensor quickly and safely:

Safety instructions

→Page 4 ff.

→Page 5

General safety instructions

Explanation of the warning symbols

Installation

→Page 7

→Page 8 ff.

Here you can find installation conditions such as sensor dimensions.

Installation examples can be found here.

Wiring

→Page 11 ff. Refer to these pages for sensor wiring.

Operating

→Page 14 ff. This chapter describes how to fill in the electrolyte.

Commissioning

→Page 16 ff. Here you find how to calibrate the sensor.

Maintenance

→Page 18

→Page 19 ff.

It is absolutely essential to carry out maintenance tasks on a regular basis.

An overview of the available spare parts and accessories.

Trouble shooting

→Page 20 ff. If faults occur during operation, use the checklist to locate the cause.

Index

→Page 25 ff. You can find important terms and keywords on the individual sections

here. Use the keyword index to find the information you need quickly and

efficiently.

Endress+Hauser

CCS120

Table of contents

1 Safety instructions . . . . . . . . . . 4

1.1 Designated use . . . . . . . . . . . . . . . . . . . . . . 4

1.2 Installation, commissioning and operation . 4

1.3 Operational safety . . . . . . . . . . . . . . . . . . . 5

1.4 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.5 Notes on safety icons and symbols . . . . . . . 5

2 Identification . . . . . . . . . . . . . . 6

2.1 Product structure . . . . . . . . . . . . . . . . . . . . 6

2.2 Scope of delivery . . . . . . . . . . . . . . . . . . . . 6

3 Installation . . . . . . . . . . . . . . . . 6

3.1 Incoming acceptance, transport, storage . . . 6

3.2 Installation conditions . . . . . . . . . . . . . . . . 7

3.3 Installation instructions . . . . . . . . . . . . . . . 8

3.4 Post-installation check . . . . . . . . . . . . . . . 10

4 Wiring . . . . . . . . . . . . . . . . . . 11

4.1 Direct connection to the transmitter . . . . . 11

4.2 Connection via junction box . . . . . . . . . . 12

4.3 Post-connection check . . . . . . . . . . . . . . . 12

5 Operation . . . . . . . . . . . . . . . . 13

5.1 Sensor design . . . . . . . . . . . . . . . . . . . . . . 13

5.2 Measuring principle . . . . . . . . . . . . . . . . . 13

5.3 Electrolyte fill in . . . . . . . . . . . . . . . . . . . . 14

6 Commissioning. . . . . . . . . . . . 16

6.1 Function check . . . . . . . . . . . . . . . . . . . . 16

6.2 Polarisation . . . . . . . . . . . . . . . . . . . . . . . 16

6.3 Calibration . . . . . . . . . . . . . . . . . . . . . . . . 16

7 Maintenance. . . . . . . . . . . . . . 18

8 Accessories. . . . . . . . . . . . . . . 19

8.1 Connection accessories . . . . . . . . . . . . . . 19

8.2 Installation accessories . . . . . . . . . . . . . . . 19

8.3 Transmitter . . . . . . . . . . . . . . . . . . . . . . . 19

8.4 Maintenance/calibration . . . . . . . . . . . . . 20

9 Troubleshooting . . . . . . . . . . . 20

9.1 Troubleshooting instructions . . . . . . . . . . . 20

9.2 Return . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

9.3 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . 22

10 Technical data . . . . . . . . . . . . 23

10.1 Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

10.2 Output . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

10.3 Performance characteristics . . . . . . . . . . . . 23

10.4 Power supply . . . . . . . . . . . . . . . . . . . . . . 24

10.5 Environment . . . . . . . . . . . . . . . . . . . . . . 24

10.6 Mechanical construction . . . . . . . . . . . . . . 24

Index. . . . . . . . . . . . . . . . . . . . 25

Safety instructions CCS120

4Endress+Hauser

1 Safety instructions

1.1 Designated use

The sensor is used for continuous measurement of total chlorine in water. Within this context

the following compounds are included in the term total chlorine:

• free chlorine (Cl2(dissolved), HOCl, OCL-)

• bound chlorine (chloramines)

• organic-bound chlorine (e.g. cyanuric acid derivates)

Typical applications are:

• Controlling total chlorine content of drinking, industrial, process, cooling water and pool

sector

• Measuring total chlorine content in fresh water and sea water for process, swimming pool and

whirl pool treatment

Any other use than the one described here compromises the safety of persons and the entire

measuring system and is, therefore, not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

1.2 Installation, commissioning and operation

Please note the following items:

• Installation, commissioning, operation and maintenance of the measuring system must only

be carried out by trained technical personnel.

The technical personnel must be authorized for the specified activities by the system operator.

• Electrical connection must only be carried out by a certified electrician.

• Technical personnel must have read and understood these Operating Instructions and must

adhere to them.

• Before commissioning the entire measuring point, check all the connections for

correctness. Ensure that electrical cables and hose connections are not damaged.

• Do not operate damaged products and secure them against unintentional

commissioning. Mark the damaged product as being defective.

• Measuring point faults may only be rectified by authorized and specially trained

personnel.

• If faults can not be rectified, the products must be taken out of service and secured against

unintentional commissioning.

• Repairs not described in these Operating Instructions may only be carried out at the

manufacturer’s or by the service organisation.

CCS120 Safety instructions

Endress+Hauser 5

1.3 Operational safety

The sensor has been designed and tested according to the state of the art and left the factory in

perfect functioning order.

Relevant regulations and European standards have been met.

As the user, you are responsible for complying with the following safety conditions:

• Installation instructions

• Local prevailing standards and regulations.

1.4 Return

If the sensor has to be repaired, please return it cleaned to the sales centre responsible.

Please use the original packaging, if possible.

Please enclose the completed "Declaration of Hazardous Material and De-Contamination" (copy

the second last page of these Operating Instructions) with the packaging and the transportation

documents.

No repair without completed declaration!

1.5 Notes on safety icons and symbols

Warning!

This symbol alerts you to hazards. They can cause serious damage to the instrument or to

persons if ignored.

Caution!

This symbol alerts you to possible faults which could arise from incorrect operation. They could

cause damage to the instrument if ignored.

!Note!

This symbol indicates important items of information.

Identification CCS120

6Endress+Hauser

2 Identification

2.1 Product structure

2.2 Scope of delivery

The following items are included in the delivery:

• 1 sensor CCS120

• 1 bottle containing electrolyte (50 ml) and nozzle

• 1 membrane cap for replacement

• 1 operating instructions BA 388C/07/en

3 Installation

3.1 Incoming acceptance, transport, storage

• Make sure the packaging is undamaged!

Inform the supplier about damage to the packaging. Keep the damaged packaging until the

matter has been settled.

• Make sure the contents are undamaged!

Inform the supplier about damage to the delivery contents. Keep the damaged products until

the matter has been settled.

• Check that the scope of delivery is complete and agrees with your order and the shipping

documents.

• The packaging material used to store or to transport the product must provide shock

protection and humidity protection. The original packaging offers the best protection. Also,

keep to the approved ambient conditions (see "Technical data").

• If you have any questions, please contact your supplier or your sales center responsible.

Mesuring range

A 0.1 ... 10 mg/l

Head type

S Thread NPT 3/4"; plug TOP 68

Options

0none

CCS120- complete order code

CCS120 Installation

Endress+Hauser 7

3.2 Installation conditions

3.2.1 Dimensions

a0003082

Fig. 1: Dimensions

mm/inch

Ø 29/

1.14

Ø 36/

1.42

Ø 28.8/

1.13

Ø 25/

0.98

27/1.06

183/7.20

74/2.91

NPT 3/4

Installation CCS120

8Endress+Hauser

3.3 Installation instructions

3.3.1 Measuring system

A complete measuring system in the flow mode comprises at least:

• Chlorine sensor

• Transmitter Liquisys M CCM223/253

• Special measuring cable

• Flow assembly

a0001691

Fig. 2: Measuring system in the flow mode (example)

The measuring system described above is available as CCE-system (fully mounted on a board).

CAL REL

REL1

ALARM

REL2

mg/l

25.0 ¡C

0.42

1 Flow assembly CCA250 6 Medium outlet

2 Medium inlet 7 Sampling tap

3 Inductive proximity switch for flow monitoring 8 Measuring cable CPK9-N*A1B

4 Mounting place for pH/redox sensor 9 Transmitter

5 Chlorine sensor CCS120

CCS120 Installation

Endress+Hauser 9

A complete measuring system in the immersion mode comprises at least:

• Chlorine sensor

• Transmitter Liquisys M CCM223/253

• Special measuring cable

• Immersion assembly

a0003087

Fig. 3: Measuring system in the immersion mode (example)

3.3.2 Installing the sensor in flow assembly CCA250

The flow assembly CCA250 is designed for on-site installation of the sensor. In addition to the

chlorine sensor, a pH and redox sensor can be installed. A needle valve regulates the flow within

the range of 30 ... 100 l/h (7.92 ... 26.40 US.gal/h). If the value drops below 30 l/h (7.92

US.gal/h) or flow stops completely, this can be detected by an inductive proximity switch and

an alarm signal plus locking of the dosage pumps can be triggered.

Note the instructions and safety guidelines in the operating instructions of the flow assembly.

If the medium is fed back into a surge tank, pipeline or the like, ensure that the thus generated

back pressure on the sensor does not exceed 1 bar (14.5 psi) and remains constant.

Negative pressure at the sensor, e.g. by feedback of medium to the suction side of a pump, must

be avoided.

CAL REL

REL1

ALARM

REL2

mg/l

25.0 ¡C

0.42

1 Junction box VBM 4 Immersion assembly CYA611-0B

2 Transmitter 5 Chlorine sensor CCS120

3 Measuring cable CYK71

Installation CCS120

10 Endress+Hauser

3.3.3 Installing the sensor in immersion assembly CYA611

The immersion assembly CYA611-0B is designed for on-site installation of the sensor. Cover the

thread NPT 3/4" with a layer of Teflon tape. Screw the sensor into the assembly.

Note the instructions and safety guidelines in the operating instructions of the immersion

assembly.

3.4 Post-installation check

• Check the membrane for leak tightness und replace it if necessary.

• Is the sensor installed in an assembly and is not suspended from the cable?

Inhaltsverzeichnis

Andere Endress+Hauser Zubehör Handbücher

Endress+Hauser

Endress+Hauser Cleanfit P CPA472D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Turbimax W CUS65 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline 100 Modbus RS485 Technische Daten

Endress+Hauser

Endress+Hauser Oxymax COS22 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser OUSAF46 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow P Technische Daten

Endress+Hauser

Endress+Hauser Turbimax CUS71D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Turbimax CUS51D Handbuch

Endress+Hauser

Endress+Hauser Oxymax W COS51D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic S Series Handbuch

Endress+Hauser

Endress+Hauser Deltapilot S FMB70 Montageanleitung

Endress+Hauser

Endress+Hauser Turbimax CUS51D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Solitrend MMP42 Technische Daten

Endress+Hauser

Endress+Hauser Proline 800 Technische Daten

Endress+Hauser

Endress+Hauser Liquipoint T Series Handbuch

Endress+Hauser

Endress+Hauser Oxymax COS61 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Oxymax W COS61 Bedienungsanleitung

Endress+Hauser

Endress+Hauser CLS15D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Turbimax CUS50D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Oxymax COS22D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Memosens COS51E Bedienungsanleitung

Endress+Hauser

Endress+Hauser CCS120D Bedienungsanleitung

Endress+Hauser

Endress+Hauser Condumax CLS15 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung