Endress+Hauser Liquiline Mobile CML18 Bedienungsanleitung

Products Solutions Services

Operating Instructions

Liquiline Mobile CML18

Multiparameter mobile device

BA02002C/07/EN/05.22-00

71558219

2022-01-26

Liquiline Mobile CML18 Table of contents

Endress+Hauser 3

Table of contents

1 About this document ........... 4

1.1 Warnings ........................... 4

1.2 Symbols ............................ 4

1.3 Symbols on the device ................ 5

2 Basic safety instructions ....... 6

2.1 Requirements for the personnel ........ 6

2.2 Intended use ........................ 6

2.3 Workplace safety .................... 6

2.4 Operational safety ................... 7

2.5 Product safety ....................... 7

3 Product description ............. 8

3.1 Product design ....................... 8

4 Incoming acceptance and

product identification ......... 10

4.1 Incoming acceptance ................ 10

4.2 Product identification ................ 10

4.3 Scope of delivery .................... 11

5 Electrical connection .......... 12

5.1 Connecting the sensor ............... 12

5.2 Charging the device ................. 13

5.3 Ensuring the degree of protection ..... 15

6 Operation options ............. 16

6.1 Overview of operation options ........ 16

6.2 Internal operating menu with keys .....16

6.3 Operation via SmartBlue app ..........20

7 Commissioning ................ 25

7.1 Preliminaries ....................... 25

7.2 Function check ..................... 25

7.3 Switching on the device .............. 25

7.4 Setting the display language .......... 26

7.5 Configuring the measuring device ..... 26

7.6 Advanced settings .................. 26

8 Operation ...................... 32

8.1 Calibration ......................... 32

8.2 Reading measured values ............ 32

9 Firmware update .............. 40

10 Diagnostics and

troubleshooting ............... 42

10.1 Diagnostics information via the local

display ............................ 42

11 Maintenance .................. 43

11.1 Maintenance tasks .................. 43

11.2 Measuring and test equipment ........ 43

12 Repair .......................... 44

12.1 Return ............................ 44

12.2 Disposal ........................... 44

13 Accessories .................... 44

13.1 M12 USB data + charging cable ....... 45

13.2 Protective cover .....................45

14 Technical data ................. 46

14.1 Input .............................. 46

14.2 Output ............................ 46

14.3 Power supply ....................... 47

14.4 Environment ....................... 47

14.5 Mechanical construction ............. 48

Index ................................. 50

About this document Liquiline Mobile CML18

4 Endress+Hauser

1 About this document

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of non-

compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

Liquiline Mobile CML18 About this document

Endress+Hauser 5

1.3 Symbols on the device

Symbol Meaning

Reference to device documentation

Basic safety instructions Liquiline Mobile CML18

6 Endress+Hauser

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance of the measuring system may be

carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

The battery may only be changed directly at the manufacturer's premises or by the

service organization.

2.2 Intended use

The Liquiline Mobile CML18 is a multiparameter mobile device for the connection of digital

sensors with Memosens technology and optional operation by smartphone or other mobile

devices via Bluetooth.

The device is designed for use in the following industries:

• Life science

• Chemical industry

• Water and wastewater

• Food and beverages

• Power stations

• Other industrial applications

The device contains a lithium ion battery. For this reason, the device may only be

exposed to the operating and storage temperatures indicated.

The device may not be exposed to mechanical shocks of any kind.

The device may not be operated under water.

2.3 Workplace safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

• Regulations for explosion protection

Liquiline Mobile CML18 Basic safety instructions

Endress+Hauser 7

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

2.5 Product safety

2.5.1 State-of-the-art technology

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

international standards have been observed.

Product description Liquiline Mobile CML18

8 Endress+Hauser

3 Product description

3.1 Product design

A0040968

 1 CML18

1 Protection cap

2 Display screen with automatic screen rotation

3 "Select" button

4 "Next" button

5 Memosens connection

6 Area for wireless charging

7 Status LED

8 M12 connection

Liquiline Mobile CML18 Product description

Endress+Hauser 9

3.1.1 Measuring parameters

The mobile device is designed for digital Memosens sensors with an inductive plug-in head

and fixed cable sensors with the Memosens protocol and no external power supply:

• pH

• ORP

• pH/ORP combination sensors

• Conductive conductivity

• Inductive conductivity

• Dissolved oxygen (optical/amperometric)

In addition to measuring the main parameters, Memosens sensors can be used to measure

temperature.

The measuring range is adapted to the individual sensor type.

Incoming acceptance and product identification Liquiline Mobile CML18

10 Endress+Hauser

4 Incoming acceptance and product identification

4.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

4.2 Product identification

4.2.1 Nameplate

The nameplate contains the following information:

• Manufacturer identification

• Device designation

• Order code

• Serial number

• Protection class

• Ambient and process conditions

• Input and output values

‣Compare the information on the nameplate with the order.

4.2.2 Product identification

Product page

www.endress.com/CML18

Interpreting the order code

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Go to www.endress.com.

Andere Handbücher für Liquiline Mobile CML18

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Levelflex FMP53 Handbuch

Endress+Hauser

Endress+Hauser iTEMP TMT162 Bedienungsanleitung

Endress+Hauser

Endress+Hauser gammapilot FTG 671 Handbuch

Endress+Hauser

Endress+Hauser Proline Promass 84 MODBUS RS485 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Flowfit CYA27 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex M FMP4 Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser dosimass Bedienungsanleitung

Endress+Hauser

Endress+Hauser FOUNDATION Proline 500 digital Technische Daten

Endress+Hauser

Endress+Hauser Liquicap M FMI52 Technische Daten

Endress+Hauser

Endress+Hauser Liquicap M FMI51 Montageanleitung

Endress+Hauser

Endress+Hauser RID16 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Memosens Wave CKI50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser RID14 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Gammapilot M FMG60 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Levelflex FMP55 Technische Daten

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 93 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Promag 300 Bedienungsanleitung

Endress+Hauser

Endress+Hauser CLA 111 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar M PMC51? Cerabar M PMP51 Handbuch

Endress+Hauser

Endress+Hauser Thermocouples TH51 Handbuch

Endress+Hauser

Endress+Hauser Proline Promass 300 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Cerabar PMC11 Handbuch

Endress+Hauser

Endress+Hauser Micropilot FMR10 Handbuch

Endress+Hauser

Endress+Hauser Proline Promass E 300 HART Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung