Endress+Hauser Promag Bedienungsanleitung

Products Solutions Services

Installation Instructions

Alteration to Display module,

to Display module with

WirelessHART or Display

module with WLAN

Promag, Promass 300, 500, 500-digital,

Prosonic Flow 300, 500-digital

EN Installation Instructions: EA01158D →  3

DE Einbauanleitung: EA01158D →  25

EA01158D/06/A2/05.19

71440122

2019-08-02

EA01158D

Endress+Hauser 3

Retrofit of a display, a display with WirelessHART or a

display with WLAN

Promag, Promass 300, 500, 500-digital, Prosonic Flow 300, 500-digital

Table of contents

1 Overview of conversion kit ......................................................... 4

2 Personnel authorized to carry out conversion ....................................... 5

3 Safety instructions ................................................................ 6

4 Symbols used ..................................................................... 8

5 Tools list .......................................................................... 8

6 Promag, Promass, Prosonic Flow 300 .............................................. 8

7 Promag, Promass 300, 500, Prosonic Flow 300 ..................................... 9

8 Mounting the wireless antenna with cable ........................................ 12

9 Flashing the device following conversion .......................................... 13

10 Promag, Promass, Prosonic Flow 500–digital ...................................... 14

11 Mounting the wireless antenna with cable ........................................ 20

12 Flashing the device following conversion .......................................... 21

13 Operating options and characteristics of WLAN antenna ........................... 22

14 Modifications to the product roots and extended order codes in the CER database on

ENGINE ......................................................................... 24

EA01158D

4 Endress+Hauser

1 Overview of conversion kit

The conversion instructions apply to the following conversion kits:

Order structure Expansion Conversion kit (contents)

Conversion kits for Promag, Promass, Prosonic Flow 300

DKZ001–****AF*** Promag, Promass, Prosonic Flow 300

transmitter without display to Promag,

Promass, Prosonic Flow 300 transmitter

with display

1 × display with ribbon cable,

1 × display holder,

1 × cover with window,

1 × O-ring,

1 × tie-on label,

1 × conversion instructions

DKZ001–****AG*** Promag, Promass, Prosonic Flow 300

transmitter without display to Promag,

Promass, Prosonic Flow 300 transmitter

with display and WLAN interface

1 × display with ribbon cable and

WLAN interface,

1 × display holder,

1 × cover with window,

1 × O-ring,

1 × tie-on label,

1 × conversion instructions

DKZ001–AA**FG***+P8

DKZ001–GR**FG***+P8

Promag, Promass, Prosonic Flow 300

transmitter with display and WLAN

interface to Promag, Promass, Prosonic

Flow 300 transmitter with display and

WLAN interface including external

antenna

1 × display with ribbon cable and

WLAN interface including external

antenna,

1 × display holder,

1 × cover with window,

1 × O-ring,

1 × tie-on label,

1 × conversion instructions

DKZ001–AABAFH***+P8

DKZ001–GRBAFH***+P8

Promag, Promass, Prosonic Flow 300

transmitter with display and WLAN

interface to Promag, Promass, Prosonic

Flow 300 transmitter with display and

WirlelessHART interface including

external antenna

1 × display with ribbon cable and

WirelessHART interface including

external antenna,

1 × display holder,

1 × cover with window,

1 × O-ring,

1 × tie-on label,

1 × conversion instructions

Conversion kits for Promag, Promass 500

DKZ002–****FGB*** Promag, Promass 500 transmitter with

display to Promag, Promass 500

transmitter with display and WLAN

interface

1 × display with ribbon cable and

WLAN interface,

1 × tie-on label,

1 × conversion instructions

DKZ002–AA**FGB***+P8

DKZ002–GR**FGB***+P8

Promag, Promass 500 transmitter with

display to Promag, Promass 500

transmitter with display and WLAN

interface including external antenna

1 × WLAN display with ribbon cable

and WLAN interface including external

antenna,

1 × tie-on label,

1 × conversion instructions

DKZ002–AABAFHB***+P8

DKZ002–GRBAFHB***+P8

Promag, Promass 500 transmitter with

display to Promag, Promass 500

transmitter with display and

WirelessHART interface including

external antenna

1 × WirelessHART display with ribbon

cable and WirelessHART interface

including external antenna,

1 × tie-on label,

1 × conversion instructions

EA01158D

Endress+Hauser 5

Order structure Expansion Conversion kit (contents)

Conversion kits for Promag, Promass, Prosonic Flow 500-digital

DKZ002–****FGA*** Promag, Promass Prosonic Flow 500-

digital transmitter with display to

Promag, Promass Prosonic Flow 500-

digital transmitter with display and

WLAN interface

1 × WLAN display with ribbon cable

and WLAN interface,

1 × tie-on label,

1 × conversion instructions

DKZ002–AA**FGA***+P8

DKZ002–GR**FGA***+P8

Promag, Promass Prosonic Flow 500-

digital transmitter with display to

Promag, Promass Prosonic Flow 500-

digital transmitter with display and

WLAN interface including external

antenna

1 × WLAN display with ribbon cable

and WLAN interface including external

antenna,

1 × tie-on label,

1 × conversion instructions

DKZ002–AABAFHA***+P8

DKZ002–GRBAFHA***+P8

Promag, Promass Prosonic Flow 500-

digital transmitter with display to

Promag, Promass Prosonic Flow 500-

digital transmitter with display and

WirelessHART interface including

external antenna

1 × WirelessHART display with ribbon

cable and WirelessHART interface

including external antenna,

1 × tie-on label,

1 × conversion instructions

2 Personnel authorized to carry out conversion

Authorization to carry out a conversion depends on the measuring device's approval type. The

table below shows the authorized group of people in each case.

Measuring device approval Personnel authorized to carry out conversion 1)

Without approval 1, 2, 3

With approval (e.g. IECEx) 1, 2, 3

For custody transfer 4

1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,

3 = Endress+Hauser (return measuring device to manufacturer)

4 = Check with local approval center if installation/modification must be performed under supervision.

EA01158D

6 Endress+Hauser

3 Safety instructions

• Only use original parts from Endress+Hauser.

• Comply with national regulations governing mounting, electrical installation,

commissioning, maintenance and device conversion procedures.

• The specialized technical staff involved in the mounting, electrical installation,

commissioning, maintenance and modification of the measuring devices must meet the

following requirements:

• Specialized technical staff must be trained in instrument safety.

• They must be familiar with the individual operating conditions of the devices.

• In the case of Ex-certified measuring devices, they must also be trained in explosion

protection.

• The measuring device is energized! Risk of fatal injury from electric shock. Open the

measuring device only when the device is de-energized.

• When using Ex-certified measuring devices: open device only when in a de-energized state

(allow 10 minutes to elapse after switching off the power supply) or in environments which

do not have a potentially explosive atmosphere.

• For measuring devices in safety-related applications in accordance with IEC 61508 or

IEC 61511: following modification, re-commission the device in accordance with the

Operating Instructions. Document the modification.

• Before removing the device: set the process to a safe state and purge the pipe of dangerous

process substances.

• Hot surfaces! Risk of injury! Before commencing work: allow the system and measuring

device to cool down to a touchable temperature.

• In the case of devices in custody transfer, the custody transfer status no longer applies once

the seal has been removed.

• The Operating Instructions for the device must be followed.

• Risk of damaging the electronic components! Ensure you have a working environment

protected from electrostatic discharge.

• After removing the electronics compartment cover: risk of electrical shock due to missing

touch protection!

Turn the measuring device off before removing internal covers.

• Only open the housing for a brief period. Avoid the penetration of foreign bodies, moisture

or contaminants.

• Replace defective seals only with original seals from Endress+Hauser.

• If threads are damaged or defective, the measuring device must be repaired.

• Threads (e.g. of the electronics compartment cover and connection compartment cover)

must be lubricated if an abrasion-proof dry lubricant is not available. Use acid-free, non-

hardening lubricant.

EA01158D

Endress+Hauser 7

• If, during modification, spacing is reduced or the dielectric strength of the measuring device

cannot be guaranteed, perform a test on completion of the work (e.g. high-voltage test in

accordance with the manufacturer's instructions).

• Service plug:

• Do not connect in explosive atmospheres.

• Only connect to Endress+Hauser service devices.

• Observe the instructions for transporting and returning the device outlined in the Operating

Instructions.

If you have any questions, please contact your Endress+Hauser service organization.

EA01158D

8 Endress+Hauser

4 Symbols used

4.1 Symbols for certain types of information

Symbol Meaning

Permitted

Procedures, processes or actions that are permitted.

Forbidden

Procedures, processes or actions that are forbidden.

Tip

Indicates additional information.

… Series of steps

5 Tools list

3 mm T20 0.5 x 3.5 mm Crimping tool

6 Promag, Promass, Prosonic Flow 300

6.1 Converting the blind version of the transmitter to a transmitter

with a display module and cover with window

1 → 2 →

3 mm

icht unter

Spannung öffnen

Do not open when

energized

sous tension

Power

Ne pas ouvrir

I/O

2.5 Nm (1.8 lbf ft)

EA01158D

Endress+Hauser 9

3 → 4

ESC

–

2. 1.

3 mm

2.5 Nm (1.8 lbf ft)

7 Promag, Promass 300, 500, Prosonic Flow 300

7.1 Converting the transmitter with a display module to a transmit-

ter with a display module and WirelessHART interface and an

external antenna or WLAN interface and optional external

antenna

The external WLAN antenna is not suitable for use in hygienic applications.

Only 4 to 20mA HART devices with WirelessHART can be converted.

1 → 2 →

1. 3 mm

ESC

–

EA01158D

10 Endress+Hauser

3 → 4 →

5 → 6 →

30 mm

4 Nm

ESC

7 → 8 →

Andere Handbücher für Promag

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser SpectraSensors 2-Pack Analyzer System Bedienungsanleitung

Endress+Hauser

Endress+Hauser LPGmass Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot NMR81 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 300 Montageanleitung

Endress+Hauser

Endress+Hauser RIA 550 Bedienungsanleitung

Endress+Hauser

Endress+Hauser FOUNDATION Fieldbus Micropilot FMR50 Technische Daten

Endress+Hauser

Endress+Hauser Stamosens CSM750 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag W 400 HART Bedienungsanleitung

Endress+Hauser

Endress+Hauser Prosonic T FMU30 Technische Daten

Endress+Hauser

Endress+Hauser FQG60 Bedienerhandbuch

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 93 Stücklistenhandbuch

Endress+Hauser

Endress+Hauser RID14 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 92F Series Montageanleitung

Endress+Hauser

Endress+Hauser Soliwave FDR16 Technische Daten

Endress+Hauser

Endress+Hauser Liquiphant S FDL60 Gebrauchsanweisung

Endress+Hauser

Endress+Hauser Proline Promag 50 Bedienungsanleitung

Endress+Hauser

Endress+Hauser RID16 Technische Daten

Endress+Hauser

Endress+Hauser Deltapilot M FMB50 Technische Daten

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 93 Technische Daten

Endress+Hauser

Endress+Hauser FHG65 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag L 400 Technische Daten

Endress+Hauser

Endress+Hauser Teqwave H Bedienungsanleitung

Endress+Hauser

Endress+Hauser DipFit W CPA 111 Bedienungsanleitung

Endress+Hauser

Endress+Hauser analytikjena Biometra TMS Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung