Endress+Hauser Waterpilot FMX21 Montageanleitung

Products Solutions Services

Safety Instructions

Waterpilot FMX21

II 2 G Ex ia IIC T6...T4 Gb

XA02555P-A/00/EN/

01.21

71533911

2021-07-05

Waterpilot FMX21 XA02555P-A

Endress+Hauser 3

Waterpilot FMX21

Table of contents

Associated documentation ......................................... 4

Supplementary documentation ..................................... 4

Manufacturer's certificates ......................................... 4

Manufacturer address ............................................. 4

Extended order code ............................................... 4

Safety instructions: General ........................................ 6

Safety instructions: Special conditions .............................. 6

Safety instructions: Installation .................................... 7

Temperature tables ................................................ 8

Connection data ................................................... 9

XA02555P-A Waterpilot FMX21

4 Endress+Hauser

Associated

documentation

This document is an integral part of the following Operating

Instructions:

BA00380P/00

Supplementary

documentation

Explosion-protection brochure: CP00021Z/11

The Explosion-protection brochure is available:

• In the download area of the Endress+Hauser website:

www.endress.com -> Downloads -> Brochures and Catalogs ->

Text Search: CP00021Z

• On the CD for devices with CD-based documentation

Manufacturer's

certificates

UK Declaration of Conformity

Declaration Number:

UK_00250

The UK Declaration of Conformity is available:

In the download area of the Endress+Hauser website:

www.endress.com -> Downloads -> Declaration ->

Type: UKCA Declaration -> Product Code: ...

UKCA type-examination certificate

Certificate number:

CML 21UKEX2466

List of applied standards: See UK Declaration of Conformity.

Manufacturer

address

Endress+Hauser SE+Co. KG

Hauptstraße 1

79689 Maulburg, Germany

Address of the manufacturing plant: See nameplate.

Extended

order code

The extended order code is indicated on the nameplate, which is affixed

to the device in such a way that it is clearly visible. Additional

information about the nameplate is provided in the associated

Operating Instructions.

Waterpilot FMX21 XA02555P-A

Endress+Hauser 5

Structure of the extended order code

FMX21 – ************* + A*B*C*D*E*F*G*..

(Device

type)

(Basic

specifications)

(Optional

specifications)

* = Placeholder

At this position, an option (number or letter) selected from the

specification is displayed instead of the placeholders.

Basic specifications

The features that are absolutely essential for the device (mandatory

features) are specified in the basic specifications. The number of

positions depends on the number of features available.

The selected option of a feature can consist of several positions.

Optional specifications

The optional specifications describe additional features for the device

(optional features). The number of positions depends on the number of

features available. The features have a 2-digit structure to aid

identification (e.g. JA). The first digit (ID) stands for the feature group

and consists of a number or a letter (e.g. J = Test, Certificate). The

second digit constitutes the value that stands for the feature within the

group (e.g. A = 3.1 material (wetted parts), inspection certificate).

More detailed information about the device is provided in the following

tables. These tables describe the individual positions and IDs in the

extended order code which are relevant to hazardous locations.

Extended order code: Waterpilot

The following specifications reproduce an extract from the product

structure and are used to assign:

• This documentation to the device (using the extended order

code on the nameplate).

• The device options cited in the document.

Device type

FMX21

XA02555P-A Waterpilot FMX21

6 Endress+Hauser

Basic specifications

Position 1, 2 (Approval)

Selected option Description

FMX21 UE UK Ex II 2G Ex ia IIC T4...T6 Gb

Position 4 (Probe Tube)

Selected option Description

FMX21 1 316L, d=22mm/0.87in

2 316L, d=42mm/1.66in, flush mount

5 PPS/Polyolefin>316L, d=29mm/1.15in, application salt-water

Optional specifications

No options specific to hazardous locations are available.

Safety

instructions:

General

• Comply with the installation and safety instructions in the Operating

Instructions.

• Staff must meet the following conditions for mounting, electrical

installation, commissioning and maintenance of the device:

• Be suitably qualified for their role and the tasks they perform

• Be trained in explosion protection

• Be familiar with national regulations

• Install the device according to the manufacturer's instructions and

national regulations.

• Avoid electrostatic charging:

• Of plastic surfaces (e.g. enclosure, sensor element, special

varnishing, attached additional plates, ..)

• Of isolated capacities (e.g. isolated metallic plates)

Safety

instructions:

Special conditions

• To avoid electrostatic charging: Do not rub surfaces with a dry cloth.

• In the event of additional or alternative special varnishing on the

enclosure or other metal parts or for adhesive plates:

• Observe the danger of electrostatic charging and discharge.

• Do not install in the vicinity of processes (≤ 0.5 m) generating

strong electrostatic charges.

• Avoid sparks caused by impact and friction.

• Anchor equipment if necessary/secure against swinging.

• Do not use in media or environments which may generate

electrostatic charges on the plastic surfaces.

Waterpilot FMX21 XA02555P-A

Endress+Hauser 7

Safety

instructions:

Installation

(+)

(–)

A0033644

 1

A Zone 1, Zone 2

B Zone 1

1 Only for Basic specification, Position 4 = 1, 2

• When the devices are connected to certified intrinsically safe circuits

of Category Ex ib, the type of protection changes to Ex ib.

• When interconnecting intrinsically safe circuits, take into account

sensor capacitance and lengthdependent cable capacitance and

inductance (see "Connection data" chapter).

• The intrinsically safe input power circuit of the device is isolated from

ground. The dielectric strength is at least 500 Vrms.

• When shortening the length of the cable: Ensure that the dielectric

strength is maintained for connection wires and earth grounded

screen.

• Connect cable screen to earth ground of the installation.

XA02555P-A Waterpilot FMX21

8 Endress+Hauser

Terminal box

A0033645

 2

1 Functional earth terminals

2 Isolation plates

3 Signal terminals

• Continuous service temperature of the connecting cable: ≥ +85 °C.

• Do not remove or move terminal blocks, isolation plates or fastening

elements.

• Do not build in additional components.

Temperature

tables

Ambient temperature range Temperature class Max. ambient temperature

–10 °C ≤ Ta ≤ +70 °C T4 +70 °C

T5 +55 °C

T6 +40 °C

Terminal box

Ambient temperature range Temperature class

–40 °C ≤ Ta ≤ +80 °C T6

Waterpilot FMX21 XA02555P-A

Endress+Hauser 9

Connection data Electrical data

Ui ≤ 30 VDC

li ≤ 133 mA

Pi ≤ 1 W

Sensor:

Ci ≤ 10.3 nF, Li = 0

Cable:

Ci ≤ 180 pF/m, Li ≤ 1 µH/m

Andere Handbücher für Waterpilot FMX21

Inhaltsverzeichnis

Andere Endress+Hauser Messgerät Handbücher

Endress+Hauser

Endress+Hauser Proline Promag 55 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cerabar S Series Bedienungsanleitung

Endress+Hauser

Endress+Hauser Gammapilot M FMG60 Bedienungsanleitung

Endress+Hauser

Endress+Hauser EngyCal RH33 Technische Daten

Endress+Hauser

Endress+Hauser Proline Prosonic Flow 91W Technische Daten

Endress+Hauser

Endress+Hauser Mycom CLM 152 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Micropilot S FMR540 Technische Daten

Endress+Hauser

Endress+Hauser Proline t-mass 65 Bedienungsanleitung

Endress+Hauser

Endress+Hauser LT5 Technische Daten

Endress+Hauser

Endress+Hauser micropilot M FMR 231 Bedienungsanleitung

Endress+Hauser

Endress+Hauser IO-Link Liquipoint FTW23 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar S FMD77 Technische Daten

Endress+Hauser

Endress+Hauser Stamolys CA71CL Bedienungsanleitung

Endress+Hauser

Endress+Hauser Raman Rxn2 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Nanomass Gas Density Bedienungsanleitung

Endress+Hauser

Endress+Hauser Liquiline System CA80AM Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex FMP53 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag H 500 Bedienungsanleitung

Endress+Hauser

Endress+Hauser HART Proline Promass 83 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD72 Handbuch

Endress+Hauser

Endress+Hauser PROline promag 53 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex M FMP41C Montageanleitung

Endress+Hauser

Endress+Hauser RIA452 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Levelflex M FMP43 Handbuch

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Uniks

Uniks C126 Bedienungsanleitung