EnGenius ECB1200 Bedienungsanleitung

Quick Installation Guide

EnGenius Europe | Veldzigt 28, 3454 PW De Meern,

Netherlands | 0900-WIFIABC | www.wiabc.com Disclaimer: Information may be subject to changes without prior notication. Follow us

https://www.linkedin.com/company/engeniuseurope

https://plus.google.com/+EngeniusEuropeBVDeMeern

https://www.youtube.com/user/engeniuseuropebv

https://twitter.com/engeniuseu

ECB1200

Package content

Unpack the box and verify the content:

- ECB1200

- RJ-45 Ethernet-cable

- 12V/1A 100V~240V Power adaptor

- 2* 2.4GHz detachable antenne

- 2* 5GHz detachable antenne

- Quick Installation Guide

- CD with instruction manual and EZ controller

Minimum requirements

- Broadband Internet Service (Cable or DSL modem)

- Internet browser (Internet Explorer, Safari, Firefox, Chrome)

Setting up the ECB1200

After verifying the contents of the box, continue on to setting up the ECB1200.

Hardware installation

1. Please install the antennas as shown below.

2. Connect one end of the Ethernet cable into the LAN port of the ECB1200

and the other end to the computer that will use the ECB1200. Ensure that the

cable is securely connected to both the ECB1200 and the computer.

3. Connect the power adaptor DC inlet to the DC-IN port of the ECB1200 and

the power adapter in to the electrical outlet.

Note: The ECB1200 supports both

IEEE802.3at PoE (Power-over-Ethernet) and

regular power adapter. You should use either

one as the power source. Please do not apply

both at the same time.

Computer setup

1. After ensuring the EnGenius device is powered on and plugged in, ensure

that your computer is on.

2. For the next steps, refer to your operating system user manual.

3. Once your computer is on, ensure that your TCP/IP is set to ‘ON’ or

‘ENABLED’. In the control panel, double click network connections and then

double click on the connection of your Network Interface Card (NIC). Select

Internet Protocol (TCP/IP) and then click on the properties button.

4. If your PC is already on a computer network, ensure that you have set it to

a Static IP adress on the interface (or Ethernet card that will use the ECB1200).

Set as 192.168.1.21 and the subnet mask address as 255.255.255.0.

Select ‘Use the following IP address’-radio button. Once the computer has been

prepared, proceed to setting up the ECB1200.

EAP1200 setup

1. To configure ECB1200, open a web browser (example: Microsoft Internet

Explorer, Mozilla Firefox, Google Chrome, etc.)

2. In the adress bar of the web browser, enter: 192.168.1.1 (the default IP

address of the ECB1200) and hit ENTER.

3. A login screen will appear. By default, the username of the ECB1200 is

admin and the password is admin. Enter the current username and password

of the ECB1200 and then click ‘Login’. Refer to the ECB1200 user manual on

how to change the username and password.

4. After clicking ‘Login’ with the correct username an password, the ECB1200

main menu will appear. If you are successful, proceed to setting up the wireless

connection.

Quick Installation Guide

EnGenius Europe | Veldzigt 28, 3454 PW De Meern,

Netherlands | 0900-WIFIABC | www.wiabc.com Disclaimer: Information may be subject to changes without prior notication. Follow us

https://www.linkedin.com/company/engeniuseurope

https://plus.google.com/+EngeniusEuropeBVDeMeern

https://www.youtube.com/user/engeniuseuropebv

https://twitter.com/engeniuseu

ECB1200

Switching between operating modes

This device can operate in the following modes: Access point, Client bridge,

WDS AP, WDS bridge and WDS station.

A. Click on the operation mode link under the system navigation drop-down

menu.

B. Operating mode: Select an operating mode from the list (Access point, Client

bridge, WDS AP, WDS bridge or WDS station) and then click on the

‘Apply’-button.

C. All basic setup is completed. Note: The wireless connection is not secure. To

setup security on the ECB1200, refer to the ECB1200 user manual.

Andere Handbücher für ECB1200

Inhaltsverzeichnis

Andere EnGenius Drahtloser Zugangspunkt Handbücher

EnGenius

EnGenius ECB300 Bedienungsanleitung

EnGenius

EnGenius ENH200 Bedienungsanleitung

EnGenius

EnGenius EAP-3660 Bedienungsanleitung

EnGenius

EnGenius EAP600 Leitfaden

EnGenius

EnGenius EOC1650 Bedienungsanleitung

EnGenius

EnGenius EWS377AP Bedienungsanleitung

EnGenius

EnGenius EAP-3660 Bedienungsanleitung

EnGenius

EnGenius EAP1750H Bedienungsanleitung

EnGenius

EnGenius EAP600 Bedienungsanleitung

EnGenius

EnGenius Turbo Engine Series Bedienungsanleitung

EnGenius

EnGenius M36 Bedienungsanleitung

EnGenius

EnGenius EWS385AP Bedienungsanleitung

EnGenius

EnGenius EAP9550 Bedienungsanleitung

EnGenius

EnGenius ECB600 Bedienungsanleitung

EnGenius

EnGenius ENH710EXT Bedienungsanleitung

EnGenius

EnGenius EWS660AP Bedienungsanleitung

EnGenius

EnGenius ESR-1221N Bedienungsanleitung

EnGenius

EnGenius ECB3500 Bedienungsanleitung

EnGenius

EnGenius EOC5510 Bedienungsanleitung

EnGenius

EnGenius M5000 Bedienungsanleitung

EnGenius

EnGenius ENH210EXT Bedienungsanleitung

EnGenius

EnGenius ENS202EXT Bedienungsanleitung

EnGenius

EnGenius EAP1200H Bedienungsanleitung

EnGenius

EnGenius EAP600 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung