EPOX KP6-LA Bedienungsanleitung

TRADEMARK

All products and company names are trademarks or

registered trademarks of their respective holders.

These specifications are subject to change without

notice.

Manual Revision 1.2

August 15, 1997

KP6-LAKP6-LA

KP6-LA

A PentiumA Pentium

A Pentium®®®®®II Processor basedII Processor based

II Processor basedII Processor based

II Processor based

AGP motherboard

FeaturesKP6-LA

Page 2

FEATURES

KP6-LA Features:

•KP6-LA is based on the Pentium®II Processor operating at 233 ~ 330 MHz

on Slot 1. The board is configured by an Easy-Setting-Single-Jumper (E.S.S.

J.) to match your CPU clock speed.

•Designed with Intel’s 82443 LX AGPset.

•Supports up to 1 Gigabyte of DRAM (minimum of 8 MB) on board, You can

use either 72-pin SIMM x 4 or 168-pin DIMM x 3 or both. (1 Bank is shared

between the SIMM & DIMM) It will automatically detect Extended Data

Output (EDO) DRAM or Synchronous DRAM memory (SDRAM)

•KP6-LA will support Error Checking and Correcting (ECC) when using parity

DRAM memory modules. This will detect multiple bit errors and correct 1-bit

memory errors.

•Supports (3) 16 bit ISA slots, (4) 32 bit PCI slots, (1) AGP slot and provides

(2) independent high performance PCI IDE interfaces capable of supporting

PIO Mode 3/4 and Ultra DMA 33 devices. The KP6-LA supports (4) PCI

Bus Master slots and a jumperless PCI INT# control scheme which reduces

configuration confusion when plugging in PCI card(s).

•Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE

interfaces.

•Designed with Winbond W83977 Multi I/O: (1) floppy port, (1) parallel port

(EPP, ECP), and (2) serial ports (16550 Fast UART).

Note: Japanese “Floppy 3 mode” is also supported

•Includes a PS/2 mouse connector.

•Allows use of a PS/2 or AT keyboard.

•Features Award Plug & Play BIOS. With Flash Memory you can always

upgrade to the current BIOS as they are released. (http://www.2themax.com/

please visit our Technical Support section for the latest updates)

Features KP6-LA

Page 3

•KP6-LA utilizes a Lithium battery which provides environmental protection

and longer battery life.

•Supports the Universal Serial Bus (USB) connector. The onboard PIIX4 chip

provides the means for connecting PC peripherals such as; keyboards,

joysticks, telephones, and modems.

•Built-in ATX 20-pin power supply connector.

•Software power-down when using Windows®95.

•Supports ring-in feature (remote power-on through external modem,

allows system to be turned on remotely.

•Supports CPU Hardware sleep and SMM (System Management Mode).

•Supports Desktop Management Interface (DMI) facilitating the management

of desktop computers, hardware and software components and peripherals,

whether they are stand-alone systems or linked into networks. (option)

•Supports LanDesk Client Manager (LDCM). (option)

Installation KP6-LA

Page 4

PCI Slot #1

AGP SLOT

CPU Cartridge SLOT 1

PCI Slot #2

PCI Slot #3

PCI Slot #4

ISA Slot #1

ISA Slot #2

ISA Slot #3

SIMM 1

SIMM 3

SIMM 2

SIMM 4

DIMM 2

DIMM 1

DIMM 3

FDD Connector

Primary IDE

Secondary IDE

Battery

ATX Power Input

RST

SLEEP

SPEAK

TBLED

H/D LED

PWR/ON

G/ LED

KEYLOCK

Intel

443LX

PCIset

Intel

PIIX4

PCIset

Winbond

83977

I/Oset

Flash Memory

for BIOS

LM7 9

Hardware

Monitor

COM 1

USB

COM 2

Parallel Port

USB 1

(Top)

Mouse

(Top)

USB 0

(Bottom)

PS/2

Keyboard

(Bottom)

JP2

JP3

J14

J15

JP5

Infrared

JP6

JP7

200MHz

266MHz

300MHz

330MHz

Default

233MHz JP8

JP12

JP10

JP11

JP9

DIMM

Volta ge

Ch as sis Pow er

Clear

CMOS

CP U Fa n P ow er

CP U Hea t

Sensoring Chip

Power Supply

Fan Monitoring

Bank 2

Bank 3

Bank 2

Bank 1

Bank 0

J11

J13

J12

J10

Reserve

KP6-LA

Rev. #

Figure 1

KP6-LA Detailed Layout

InstallationKP6-LA

Page 5

Easy Installation Procedure

The following must be completed before powering on your new system:

Configure Jumpers to match your hardware

Install memory chips

Device Connectors

Configure Jumpers

2theMax designs all motherboards with the fewest jumpers to make your install fast

and easy.

The following will describe all of the jumpers that you are required to set before

moving on to step 2.

Note: The jumpers as depicted as shown (Figure 1) in their correct physi-

cal orientation.

BIOS Voltage Setting

JP2,JP3: = 1-2 -+5V Flash (Default)

= 2-3 - +12V Flash

JP2:

JP3:

CMOS Clear

JP5: = 1-2 -Run Mode (Default)

= 2-3 - Clear CMOS

JP5:

JP6:

DIMM Voltage Selection

JP6: = 1-2, 3-4 - 3.3V DIMM (Default)

= 5-6, 7-8 - 5V DIMM

Installation KP6-LA

Page 6

CPU Processor Selection

JP8: = 1-2 - 200MHz

= 3-4 - 233MHz (Default)

= 5-6 - 266MHz

= 7-8 - 300MHz

= 9-10 - 330MHz

= 11-12 - Reserved

= 13-14 - Reserved

= 15-16 - Disable E.S.S.J.

1516

JP8:

JP9:

JP10:

JP11:

JP12:

Reserved CPU Processor Selections

JP9: = Reserved

JP10: = Reserved

JP11: = Reserved

JP12: = Reserved

InstallationKP6-LA

Page 7

System Memory Configuration

Memory Layout

The KP6-LA supports (3) 168-pin DIMMs (Dual In-line Memory Module) and (4)

72-pin SIMMs (Single In-line Memory Module). The DIMMs can be either EDO

(Enhanced Data Out) or SDRAM (Synchronized DRAM). The 72-pin SIMMs must

be installed in pairs, and DIMMs may be installed using just one chip.

• Same size and type EDO memory must be installed in pairs

so that memory modules are not mixed in each bank.

• DIMM SDRAM may be 83MHz (12ns), 100MHz (10ns) or

120MHz (8ns) bus speed.

• You may mix EDO & SDRAM DIMM modules.

• If you use both 50ns and 60ns memory you must configure

your BIOS to read 60ns.

• When using Synchronous DRAM we recommend using the

4 clock variety over the 2 clock.

• Fast Page Mode DRAM (FPM) is not supported by the LX

AGPset. Only EDO and SDRAM are supported.

Figure 2 and Table 1 show several possible memory configurations using both SIMM

and DIMM.

Figure 2

SIMM 1

DIMM 1

DIMM 3

DIMM 2

SIMM 3

SIMM 4

SIMM 2 Bank 2

Bank 3

Bank 2

Bank 0

Bank 1

- 5 V FP / EDO

-3.3V Synchronous

-3.3V/5V FP / EDO

Caution: DIMM BANK 2 & SIMM BANK 2 ARE

SHARED

This means that if you use SIMM 1&2 you can not use DIMM 1

or if you use DIMM 1 you can not use SIMM 1&2.

Installation KP6-LA

Page 8

* SDRAM only supports 8, 16, 32, 64, 128MB DIMM modules.

Table 1

yromeMlatoTyromeMlatoT yromeMlatoT yromeMlatoTyromeMlatoT 3MMID3MMID 3MMID 3MMID3MMID )0knaB( 2MMID2MMID 2MMID 2MMID2MMID )1knaB(

1MMID1MMID 1MMID 1MMID1MMID )2knaB( derahS

4-3MMIS4-3MMIS 4-3MMIS 4-3MMIS4-3MMIS )3knaB(

2-1MMIS2-1MMIS 2-1MMIS 2-1MMIS2-1MMIS )2knaB( derahS

BG1= mumixaM

*MARDS/ODE BM23,BM61,BM8 M652,BM821,BM46 1X

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

ODE ,BM61,BM8,BM4 BM821,BM46,BM23 2X

enoN

BG1= mumixaM

*MARDS/ODE BM23,BM61,BM8 M652,BM821,BM46

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

enoN

ODE ,BM61,BM8,BM4 BM821,BM46,BM23 2X

BM867= mumixaM

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

enoNenoN

BM867= mumixaM

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

enoN

ODE ,BM61,BM8,BM4 BM821,BM46,BM23 2X

enoN

BM867= mumixaM

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

enoNenoN

ODE ,BM61,BM8,BM4 BM821,BM46,BM23 2X

BM215= mumixaM

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

enoNenoNenoN

BM215= mumixaM

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

enoNenoN

ODE ,BM61,BM8,BM4 BM821,BM46,BM23 2X

enoN

BM215= mumixaM enoNenoNenoN

ODE ,BM61,BM8,BM4 BM821,BM46,BM23 2X

BM652= mumixaM enoNenoNenoN

ODE ,BM61,BM8,BM4 BM821,BM46,BM23 2X

enoN

BM652= mumixaM

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

enoNenoNenoNenoN

InstallationKP6-LA

Page 9

Device Connectors

Please install the motherboard into the chassis.

Now that your motherboard is installed you are ready to connect all your connections

(figure 12).

USB 1

(Top)

USB 0

(Bottom)

PS/2 Mouse

(Top)

PS/2 Keyboard

(Bottom)

Parallel Port

(Top)

Com1 Com2

(Bottom Left) (Bottom

Right)

J7: CPU Fan Power

• A plug-in for the CPU Fan Power

J8: Power Supply Fan Monitoring

• A plug-in for the Power supply so that BIOS can monitor the RPM’s

J9: ATX Power Connector

• 20-pin power connector

J10: Chassis Panel Connector

• Keylock, Speaker, Reset, Turbo, Sleep, G/LED and HDD LED

J11: Primary IDE

J12: Secondary IDE

J13: FloppyController

J14: Chassis Fan Power

• A plug-in for the chassis Fan Power

J15: Chassis open monitoring

• A plug-in to monitor the chassis

Figure 12

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456

Installation KP6-LA

Page 10

Speaker - Connect to the system's speaker for beeping

1. Speaker 3. GND

2. N/C 4. GND

Reset - Closed to restart system.

Turbo LED indicator - LED ON when higher speed is selected

Sleep/Resume switch : Closed to enter sleep mode, a keystroke or

mouse movement will instantly "wake up" the system.

Power Saving LED indicator - LED ON when system is in any power

saving mode

IDE LED indicator - LED ON when Onboard PCI IDE Hard disks is

activate

KeyLock - Keyboard lock switch & Power LED connector

1. Power LED(+) 4. Keylock

2. N/C 5. GND

3. GND

JP9

Power On/Off

JP7

Device Connectors (continued)

Andere Handbücher für KP6-LA

Inhaltsverzeichnis

Andere EPOX Hauptplatine Handbücher

EPOX

EPOX P55-BT Bedienungsanleitung

EPOX

EPOX EP-6VBA2 Bedienungsanleitung

EPOX

EPOX EP-3S1A Bedienungsanleitung

EPOX

EPOX EP-4B2AE Bedienungsanleitung

EPOX

EPOX GXA486SPM Bedienungsanleitung

EPOX

EPOX 3WXA Bedienungsanleitung

EPOX

EPOX EP-61BXC-A Bedienungsanleitung

EPOX

EPOX nVIDIA nForce3 250Gb Bedienungsanleitung

EPOX

EPOX 3XCA2 Bedienungsanleitung

EPOX

EPOX BX5 Bedienungsanleitung

EPOX

EPOX EP-3WEF2 Bedienungsanleitung

EPOX

EPOX EP-3VCA2 Bedienungsanleitung

EPOX

EPOX EP8K9A Bedienungsanleitung

EPOX

EPOX EP-BX5C Bedienungsanleitung

EPOX

EPOX EP-3VCA Bedienungsanleitung

EPOX

EPOX EP-V370Y Bedienungsanleitung

EPOX

EPOX MU-8KHA Bedienungsanleitung

EPOX

EPOX EP-5BTXA-E Bedienungsanleitung

EPOX

EPOX MVP4M Bedienungsanleitung

EPOX

EPOX F61 Bedienungsanleitung

EPOX

EPOX P2-133A Bedienungsanleitung

EPOX

EPOX MVP3G-M Bedienungsanleitung

EPOX

EPOX EP-8HDA5J Bedienungsanleitung

EPOX

EPOX 8KTA Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Epson

Epson S5U13700P00C000 Bedienungsanleitung