EPOX KP6-LS Bedienungsanleitung

TRADEMARK

All products and company names are trademarks or

registered trademarks of their respective holders.

These specifications are subject to change without

notice.

Manual Revision 1.2

Feburary 10, 1997

KP6-LS (SMP)

A Dual Pentium®II Processor based

AGPmainboard

KP6-LS

Technical Support Services

If you need additional information, help during installation or normal use of this

product, please contact your retailer. If your retailer can not help, you may E-Mail us

with any questions at the following address [email protected].

Record your serial number before installing your KP6-LS mainboard. (the serial

number is located near the ISA slots at the edge of the board)

EPoX KP6-LS serial number:

__________________________

BIOS Upgrades

Please use either our Web Site or BBS for current BIOS Upgrades.

Internet Access

http://www.epox.com

[email protected]

Modem Access

886-2-247-2724 (Taiwan)

31-182-618451 (The Netherlands)

You can access this number via a Hayes-compatible modem with a 2,400 to

28,800 baud rate. The following setup format is required:

8 Data Bits, No Parity, 1 Stop Bit.

If your modem is unable to connect at higher baud rates, try connecting at

2,400 baud before contacting Technical Support.

Thank you for using EPoX mainboards!

KP6-LS

User Notice

No part of this product, including the product and software may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language

in any form by any means without the express written permission of EPoX Computer

Company (hereinafter referred to as EPoX) except documentation kept by the

purchaser for backup purposes.

EPoX provides this manual “as is” without warranty of any kind, either express or

implied, including but not limited to the implied warranties or conditions of merchant-

ability or fitness for a particular purpose. In no event shall EPoX be liable for any

loss or profits, loss of business, loss of use or data, interruption of business or for

indirect, special incidental, or consequential damages of any kind, even if EPoX has

been advised of the possibility of such damages arising from any defect or error in

the manual or product. EPoX may review this manual from time to time without

notice. For updated BIOS, drivers, or product release information you may visit

EPoX’s home page at: http://www.epox.com

Products mentioned in this manual are mentioned for identification purposes only.

Product names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies.

The product name and revision number are both printed on the mainboard

itself.

Handling Procedures

Static electricity can severely damage your equipment. Handle the KP6-LS

and any other device in your system with care and avoid unneccessary contact with

system components on the mainboard.

Always work on an antistatic surface to avoid possible damage to the motherboard

from static discharge.

We assume no responsibility for any damage to the KP6-LS mainboard that results

from failure to follow installation instructions or failure to observe safety precautions.

CAUTION

TheKP6-LSmainboardissubjectto

damageby staticelectricity. Always

observethehandlingprocedures.

KP6-LS

Table of Contents

Section 1 Introduction

ComponentsChecklist .................................... 1-1

Overview

PentiumII....................................................... 1-2

S.E.C.CartridgeTerminology ......................... 1-3

SMP .............................................................. 1-4

AcceleratedGraphicsPort .............................. 1-5

HardwareMonitoring ..................................... 1-5

DesktopManagementInterface ...................... 1-5

KP6-LS Form-Factor .................................... 1-6

I/OShieldConnector...................................... 1-7

Power-On/Off(Remote)................................. 1-7

SystemBlockDiagram ................................... 1-8

Section 2 Features

KP6-LS Features ........................................... 2-1

Section 3 Installation

KP6-LSDetailed Layout ................................ 3-2

Easy Installation Procedure

ConfigureJumpers .......................................... 3-3

SystemMemoryConfiguration ........................ 3-5

InstallingaPentium®IIProcessor .................... 3-8

DeviceConnectors ......................................... 3-10

Section 4 Award BIOS Setup

BIOSInstructions ........................................... 4-1

Standard CMOS Setup .................................. 4-2

BIOS Features Setup ..................................... 4-3

ChipsetFeatures Setup ................................... 4-8

KP6-LS

PowerManagementSetup .............................. 4-13

PNP/PCIConfiguration .................................. 4-17

IntegratedPeripherals ..................................... 4-19

Change Supervisor or User Password ............. 4-24

IDEHDDAutoDetection............................... 4-24

HDDLowLevelFormat................................. 4-27

Save&Exit Setup .......................................... 4-27

ExitWithoutSaving......................................... 4-27

Section 5 DMI

DMI Access................................................... 5-1

Section 6 Appendix

Appendix A

MemoryMap ................................................. A-1

I/O Map......................................................... A-1

Timer&DMAChannelsMap......................... A-2

InterruptMap ................................................. A-2

RTC & CMOS RAM Map ............................ A-3

Appendix B

POST Codes ................................................. A-5

UnexpectedErrors ......................................... A-8

Appendix C

LoadSetupDefaults ....................................... A-9

IntroductionKP6-LS

Page 1-1

Section 1

INTRODUCTION

Components Checklist

üü

üA. (1) KP6-LS mainboard

üü

üB. (1) KP6-LS user’s manual

üü

üC. (1) Floppy ribbon cable

üü

üD. (2) Hard drive ribbon cables

üü

üE. (2) Retention Module

üü

üF. (2) Heatsink Support Unit (option)

üü

üG. (1) PS/2 to AT keyboard connector adapter (option)

üü

üH. (1) Bus master drivers

(1) DMI (option)

USERS

MANUAL

KP6-LS

Top Half

Bottom Half H

COM 1COM 2

PS/2

KP6-LS

Rev. #

USB

Parallel Port

Introduction KP6-LS

Page 1-2

Overview

Pentium II

The Pentium®II Processor is the follow-on to the Pentium®Processor. The

Pentium®II Processor, like the Pentium®Pro processor, implements a Dynamic

Execution micro-architecture -- a unique combination of multiple branch prediction,

data flow analysis, and speculative execution. This enables the Pentium®II Proces-

sor to deliver higher performance than the Pentium®processor, while maintaining

binary compatibility with all previous Intel architecture processors.

A significant feature of the Pentium®II Processor, from a system perspective, is the

built-in direct multiprocessing support. In order to achieve multiprocessing, and

maintain the memory and I/O bandwidth to support it, new system designs are

needed. For systems with dual processors, it is important to consider the additional

power burdens and signal integrity issues of supporting multiple loads on a high speed

bus. The Pentium®II Processor card supports both uni-processor and dual processor

implementations.

The Pentium®II Processor utilizes Single Edge Contact (S.E.C.) (Figure 1) cartridge

packaging technology. The S.E.C. cartridge allows the L2 cache to remain tightly

coupled to the processor, while maintaining flexibility when implementing high perfor-

mance processors into OEM systems. The second level cache is performance

optimized and tested at the cartridge level. The S.E.C. cartridge utilizes surface

mounted core components and a printed circuit board with an edge finger

connection. The S.E.C. cartridge package introduced on the Pentium®II Processor

will also be used in future Slot 1 processors.

The S.E.C. cartridge has the following features: a thermal plate, a cover and a PCB

with an edge finger connection. The thermal plate allows standardized heatsink

attachment or customized thermal solutions. The thermal plate enables a reusable

heatsink to minimize fit issues for serviceability, upgradeability and replacement. The

full enclosure also protects the surface mount components. The edge finger connec-

tion maintains socketabilty for system configuration. The edge finger connector is

denoted as ‘Slot 1 connector’ in this and other documentation.

The entire enclosed product is called the Pentium®II Processor. The packaging

technology and each of the physical elements of the product are referred to using

accurate technical descriptions. This allows clear reference to the products as just a

processor. This is the model used in past packaging technologies like PGA, TCP,

PQFP, DIP, etc.

IntroductionKP6-LS

Page 1-3

S.E.C. Cartridge Terminology

• Pentium®II Processor

The new enclosed card packaging technology is called a “Single

Edge Contact cartridge.” This is similar to previous names for

packaging technology such as PGA or TCP.

• Processor card

The green PCB (with or without components on it)

• Processor core

The silicon on the PLGA package on the PCB

• Cover

The plastic cover on the opposite side from the thermal plate.

• Slot 1

The slot that the S.E.C. cartridge plugs into, just as the Pentium®

Pro processor uses Socket 8.

• Retention mechanism

Formerly ‘retention module’ the dual posts, etc. that holds the

cartridge in place.

• Thermal plate

The heatsink attachment plate.

• Heat sink supports

The support pieces that are mounted on the mainboard to provide

added support for heatsinks.

The L2 cache (TagRAM, PBSRAM) components keep standard industry names.

The Pentium®II Processor is the first product to utilize the S.E.C. cartridge technol-

ogy and Slot 1 connector. Unless otherwise noted, any references to “Pentium®II

Figure 1: Pentium®II Processor CPU

with S.E.C. Cartridge

Processor

Printed Circuit Board

Thermal Plate

Cover

Processor,” “Pentium®II Processor/Slot

1 processor” or Processor” will apply to

both the Pentium®II Processor desktop

processors.

Introduction KP6-LS

Page 1-4

Enterprise Symmetrical

Multi-Processing (SMP)

At last an Enterprise-Class solution for your Bandwidth Critical applications server at

PC prices. This mainboard features the latest Intel Pentium® II Processor horse-

power in a Symmetrical Multi-Processing (SMP) configuration previously only

available on RISC and Mainframe systems.

In SMP Operating Systems such as Unix®and Windows®NT the two main tasks of

I/O and Application thread can be most efficiently done if split evenly over two

CPU’s. The core benefit to you is not only the reduced outlay in infrastructure, but

also the PC-architecture that you need for security of investment and future

compatibility.

This mainboard is also an excellent single-user Workstation solutions for Mission-

Critical 32-bit applications such as Adobe®Photoshop for Windows®NT, where

double floating-point power can really smooth out your work-load. Also provided are

the latest PC Workstation technologies including A.G.P., USB, and PC2.1 Expansion

Slots.

Operating Systems that

support Dual Processing

emaNmetsySgnitarepOnoisiveRCIPAAA39028S

TNswodniW noitatskroW/revreS evobaro15.3seY

PMSerawteNxx.4noisivererutufanidetroppuseblliw,oN

XPMxinUOCS0.3detroppusebotdennalpton,oN

revresnepOxinUOCS0.5seY

siraloS5.2/4.2noisivererutufanidetroppuseblliw,oN

erawxinU1.2/x0.2seY/oN

PMS2/SO11.2noisivererutufanidetroppuseblliw,oN

Andere Handbücher für KP6-LS

Inhaltsverzeichnis

Andere EPOX Hauptplatine Handbücher

EPOX

EPOX MU-4PEA800 Bedienungsanleitung

EPOX

EPOX EP-8NPAJ Bedienungsanleitung

EPOX

EPOX EP-7KXA Bedienungsanleitung

EPOX

EPOX EP-5P945-J3 Bedienungsanleitung

EPOX

EPOX EP-61BXC-A Bedienungsanleitung

EPOX

EPOX EP-3C1A Bedienungsanleitung

EPOX

EPOX mu-3vsa Bedienungsanleitung

EPOX

EPOX P2-133A Bedienungsanleitung

EPOX

EPOX EP-68LXR Bedienungsanleitung

EPOX

EPOX BX6 Bedienungsanleitung

EPOX

EPOX BX5 Bedienungsanleitung

EPOX

EPOX EP-3VCA2 Bedienungsanleitung

EPOX

EPOX IP-4PCI2E Series Bedienungsanleitung

EPOX

EPOX AMD Socket et A Processor based AGP (8X)... Bedienungsanleitung

EPOX

EPOX EP-58MVP3C-M Bedienungsanleitung

EPOX

EPOX EP-4BDM Bedienungsanleitung

EPOX

EPOX EP-BX3 Bedienungsanleitung

EPOX

EPOX ADE-9040 Bedienungsanleitung

EPOX

EPOX P2-112A Bedienungsanleitung

EPOX

EPOX EP-BX5C Bedienungsanleitung

EPOX

EPOX P2-133A Bedienungsanleitung

EPOX

EPOX EP-61EXA-A Bedienungsanleitung

EPOX

EPOX BXA-M Bedienungsanleitung

EPOX

EPOX EP-5BTXA-E Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung