EP-USB66
User Notice
No part of this product, including the product and software may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form
without the express written permission of EPoX Computer Company (hereinafter referred
to as EPoX) except for documentation kept by the purchaser for backup purposes.
We provide this manual “as is” without warranty of any kind, either expressed or implied,
including but not limited to the implied warranties or conditions of merchantability or
fitness for a particular purpose. In no event shall EPoX be liable for any loss of profits,
loss of business, loss of use or data, interruption of business or for indirect, special
incidental, or consequential damages of any kind, even if EPoX has been advised of the
possibility of such damages arising from any defect or error in the manual or product.
EPoX may revise this manual from time to time without notice. For updated product
release information you may visit our websites at
http://www.epox.com, http://www.epox.com.tw or http://www.epox.nl.
Products mentioned in this manual are mentioned for identification purposes only.
Product names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies. The product name and revision number are
both printed on the diagnostic card itself.
Handling Procedures
Static electricity can severely damage your equipment. Handle the EP-USB66 and any
other device in your system with extreme care and avoid unnecessary contact with system
components on the motherboard or converter card. Always work on an antistatic surface
to avoid possible damage to the motherboard from static discharge. Always have the
power supply unplugged and powered off when inserting and removing devices within the
computer chassis. EPoX assumes no responsibility for any damage to the EP-USB66
that results from failure to follow instruction or failure to observe safety precautions.
CAUTION
The EP-USB66 card is subject to
damage by static electricity. Always
observethehandlingprocedures.
