Equinox Systems LED Par 64 Bedienungsanleitung

Order codes:

EQLED016 (Black Housing)

EQLED016A (Polished Housing)

LED Par 64

User Manual

www.prolight.co.uk LED Par 64 User Manual 2

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablevoltageisbetween

100~240V,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• WARRANTY:Oneyearfromdateofpurchase.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

www.prolight.co.uk LED Par 64 User Manual 3

Product overview & technical specications

Featuringhighintensity10mmLEDs,thisparcanboastsnotonlyagreat

outputbutsuperbeyecandyeffectsaswellforperformancesofallsizes.

Theunitsoperateinseveralmodes,includingDMX,staticcolour,colour

mix,auto,soundactiveandmaster/slave.Internalprogramsguaranteea

stunningshowwhenseveralunitsarelinkedtogether.

•177x10mmLEDs(R:60,G:57,B:60)

•Beamangle:25°

•1,785Lux@2m(fullon)

•DMXchannels:3or6selectable

•Staticcolour,colourmix,auto,soundactiveandmaster/slavemodes

•0-100%dimmingandvariablestrobe

•Bracketallowsformultipleriggingandoorstandingapplications

•4pushbuttonmenuwithLEDdisplay

•IECpowerinput/output

•3-PinXLRinput/output

•Convectioncooled

LED Par 64

Specications

Powerconsumption 25W

Powersupply 100~240V,50/60Hz

Fuse F1A250V

Dimensions 350x275x300mm

Weight 1.6kg

Ordercodes EQLED016-Blackhousing

EQLED016A-Polishedhousing

350mm

275mm 300mm

0m 1m 2m 3m 4m 5m

25° - Lux

FULL ON

7160

944

4960

1300

1785

236

1240

324

796

105

551

144

25°

447

310

286

37.8

198

51.8

www.prolight.co.uk LED Par 64 User Manual 4

Technical specications

01-LEDdisplay

02-Functionbuttons

03-3-PinDMXinput

04-3-PinDMXoutput

05-IECpowerinput

06-IECpoweroutput

07-FuseF1A250V

08-Bracketknob

09-Bracket

10-Safetyeye

Inthebox:1 x xture,

1 x power cable,

& 1 x user manual

DOWNUPMENU ENTER

POWER OUTPUTPOWER INPUT

DMX

OUTPUT

SAFETY

EYE

DMX

INPUT

FUSE:

F1A 250V

100-240V~

50/60Hz

www.prolight.co.uk

POWER CONSUMPTION: 25W

LED

PAR 64

06 07

www.prolight.co.uk LED Par 64 User Manual 5

Operating instructionsOperating instructions

A u 1

A u 2

Auto

Auto modes

S o 1

S o 2

Soun

Sound modes

S P 1

S P 9

SPEE

Speed setting

d I 1

d I 9

dINN

Master dimmer

S 0 1

S 0 7

St@t

Static colour mode

S E 1

S E 9

S E n S

Sound sensitivity

o n

oFF

b L n d

Blackout

S L A V

Slave mode

C o L o

r 0 0 1

g 0 0 1

r 2 5 5

g 2 5 5

b 0 0 1 b 2 5 5

Colour mix mode

d 1

d 5 1 2

DMX settings

A d d r

6 C H

3 C H

www.prolight.co.uk LED Par 64 User Manual 6

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes

tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof

thextureandeachxtureindependently.

ToaccesstheDMXmode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonstoshow

AddrontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonsto

chooseoneofthe3or6DMXchannelmodes.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”

buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

6 channel mode:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2 000-255 Strobe(slow-fast)

CH3 000-255 Reddimmer(0-100%)

CH4 000-255 Greendimmer(0-100%)

CH5 000-255 Bluedimmer(0-100%)

CH6

000-009 Nofunction

010-069 Autoprogram1(slow-fast)

070-129 Autoprogram2(slow-fast)

130-189 Soundprogram1(low-high)

190-255 Soundprogram1(low-high)

3 channel mode:

Channel Value Function

CH1 000-255 Reddimmer(0-100%)

CH2 000-255 Greendimmer(0-100%)

CH3 000-255 Bluedimmer(0-100%)

Operating instructions

Static colour mode:

Toaccessthestaticcolourmode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttons

toshowSt@tontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”

buttonstochooseoneofthestaticcoloursbetweenS 01~S 07.

Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Auto modes:

Toaccesstheautomodes,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonstoshow

AutoontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonsto

chooseoneoftheautomodesbetweenAu 1~Au 2.

Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Colour macros:

01 Red

02 Green

03 Blue

04 Yellow

05 Cyan

06 Magenta

07 White

www.prolight.co.uk LED Par 64 User Manual 7

Sound modes:

Toaccessthesoundmodes,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonstoshow

SounontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonsto

chooseoneofthesoundmodesbetweenSo 1~So 2.

Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Speed setting:

Toaccessthespeedsettingforautoandsoundmodes,pressthe“MENU”buttonandusethe“UP”and

“DOWN”buttonstoshowSPEEontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”

and“DOWN”buttonstoselectbetweenSP 1~SP 9.

Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Sound sensitivity:

Toaccessthesoundsensitivitysetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttons

toshowSEnsontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”

buttonstoselectthesoundsensitivitybetweenSE 1~SE 9.

Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Colour mix mode:

Toaccessthecolourmixmode,pressthe“MENU”buttontoshowCoLoontheLEDdisplay.

Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooser001.

Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthebrightnessofRed

between000~255.Value: 000 - 255 (000 = low, 255 = high).

Nowpressthe“ENTER”buttonandrepeatforgGreen,andb.

Pressthe“ENTER”buttontoconrmthesetting. 

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Master dimmer:

Toaccessthemasterdimmersetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttons

toshowdINNontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”

buttonstoselectthebrightnessbetweendI 1~dI 9.

Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Pleasenote:thisoverridesthebrightnessforstaticcolour,auto,soundandcolourmixmodes.

www.prolight.co.uk LED Par 64 User Manual 8

Blackout setting:

ToaccesstheblackoutwhenDMXfailssetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”

buttonstoshowbLndontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and

“DOWN”buttonstochoosebetweenonorofF.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Master/slave mode:

Tosetthemasterunit,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonstoselectoneof

theprogrammodes.

Tosettheotherunitsinslavemode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsto

showSLAVontheLEDdisplay.Pressthe“ENTER”buttontoconrmthesetting.

Theunitwillnowruninsequencewiththemasterunit.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Operating instructions

www.prolight.co.uk LED Par 64 User Manual 9

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Also remember that DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

www.prolight.co.uk LED Par 64 User Manual 10

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterference.itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (female)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (female)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (male)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (male)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Equinox Systems Beleuchtungsausrüstung Handbücher

Equinox Systems

Equinox Systems Goboceptor Bedienungsanleitung

Equinox Systems

Equinox Systems 400W UV Cannon Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED032A Bedienungsanleitung

Equinox Systems

Equinox Systems Terminator 2 Bedienungsanleitung

Equinox Systems

Equinox Systems GEMINI Bedienungsanleitung

Equinox Systems

Equinox Systems Saturn Spot Bedienungsanleitung

Equinox Systems

Equinox Systems Axis 50W Gobo Flower Bedienungsanleitung

Equinox Systems

Equinox Systems FUSION SPOT XP Bedienungsanleitung

Equinox Systems

Equinox Systems Interceptor MKII Bedienungsanleitung

Equinox Systems

Equinox Systems NEBULA Bedienungsanleitung

Equinox Systems

Equinox Systems FUSION SPOT MAX MKII Bedienungsanleitung

Equinox Systems

Equinox Systems SF-300 Bedienungsanleitung

Equinox Systems

Equinox Systems ATRIA Bedienungsanleitung

Equinox Systems

Equinox Systems UV Mini Batten 9 Bedienungsanleitung

Equinox Systems

Equinox Systems Fusion Saber Bedienungsanleitung

Equinox Systems

Equinox Systems SCORPIO EQLA11 Bedienungsanleitung

Equinox Systems

Equinox Systems Gigabar MKII COB Bedienungsanleitung

Equinox Systems

Equinox Systems Party Par EQLED015 Bedienungsanleitung

Equinox Systems

Equinox Systems EQLED65 Giga Bar System Bedienungsanleitung

Equinox Systems

Equinox Systems Comet EQLED29 Bedienungsanleitung

Equinox Systems

Equinox Systems Eyebar Bedienungsanleitung

Equinox Systems

Equinox Systems MaxiPar Tri Bedienungsanleitung

Equinox Systems

Equinox Systems CONSTELLA Bedienungsanleitung

Equinox Systems

Equinox Systems FLAM11 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung