Ergolet Stellar/160 Montageanleitung

Stellar/160

Stand-aid lifter

User instruction

Important information

This user instruction must be read

before the mobile lifter is used.

This user instruction is intended

for technicians, installers,

therapists and other personnel, in

connection with the use, servicing

and maintenance of the Stand-aid

lifter.

Date: 01.10.2013 - Version 02

Scan the QR-code for further information

Contents

1. Aim and use

1.1 Purpose 4

1.2 Safety instructions 4

1.3 Daily check 5

1.4 Terminology 5

1.5 Unpacking 6

1.6 Assembling instruction 6

1.7 Mounting of lifting slings 8

2. Functions

2.1 Pictograms and functions –control box 9

2.2 Pictograms and functions –hand control 10

2.3 Safety functions 11

2.4 Charging 12

2.5 Transport 12

3. Use

3.1 Adjusting the knee support 13

3.2 Using the lifting slings 13

3.3 Using the control box 15

4. Maintenance

4.1 Cleaning 16

4.2 Storage 16

4.3 Special environments 16

5. Check and trouble shooting

5.1 Annual check 16

5.2 Trouble shooting 17

6. Technical data and dimensions

6.1 Technical specifications 18

6.2 Dimensions 19

7. Environment and quality

7.1 Disposal 20

7.2 Battery 20

7.3 Quality 20

7.4 Symbols and abbreviations 21

8. Accessories 22

1. Aim and use

1.1 Purpose

Stellar/160 is a mobile stand-aid lifter designed to transfer persons in institutions such as

nursing homes, hospitals, care centres and in home care. Stellar can be used for transfer

between bed and chair/wheelchair, from chair to another chair and from wheelchair to a

toilet/commode.

Stellar is approved to transfer with a maximum load on 160 kg.

Before using the Stellar please follow these instructions:

Personnel have received qualified instruction by Ergolet in using the stand-aid lifter.

The stand-aid lifter has been assembled correctly and according to this user instruction.

NEVER use the stand-aid lifter for other purposes than described in this user instruction.

Ensure the user cannot be squeezed or restricted in the lifting situation.

The stand-aid lifter has been developed for use with Ergolet lifting slings and other sling

products authorized by Ergolet. See Ergolet’s user instruction for slings for specific

information about which models that can be used.

The stand-aid lifter is intended for indoor use under normal temperatures (+2 –+40 C°)

and relative humidity (40-90%).

1.2 Safety instructions

This user instruction must be read thoroughly before the stand-aid lifter is taken into use.

All parts must be mounted correctly according to this user instruction.

There must be no indication of wear and tear on the stand-aid lifter or the lifting sling.

NEVER begin lifting if there is suspicion of any defect (abnormal sound, loose brackets

etc.). In such cases it is important to find the cause and to take the stand-aid lifter out of

service and your dealer or Ergolet contacted.

The lifting capacity must never be exceeded. When using the stand-aid lifter in

connection with other components e.g. slings it is always the component with the

LOWEST weight capacity that decides the maximum lifting capacity.

Ensure that neither carers/helpers nor patients/users can be hurt during the lifting.

Using the lifter may not run on uneven surfaces or threshold.

Never lift higher than necessary in the actual lifting situation.

See section 5.1 (annual check) for further information.

Important –Warning!

1.3 Daily check

The carer/helper is responsible for ensuring that a daily check is carried out BEFORE the

stand-aid lifter and accessories are used, including the following:

1) Check that the stand-aid lifter is complete and no parts are missing.

2) Check that there are no signs of rust, wear and tear or other defects. If there is any sign

of a defect the stand-aid lifter must be taken out of service.

3) If any abnormal sound is heard from the stand-aid lifter, the lifter must not be used

before personnel authorised by Ergolet have carried out a safety check on the unit.

4) Check the lifting slings for any damages especially as regards to the lifting straps for

tears in the material. The slings must not be used if defects are detected.

5) If in any doubt concerning the use of stand-aid lifter or lifting slings, contact Ergolet for

advice and guidance.

1.4 Terminology

Fig. 1.4

Hand control

Actuator (lifting motor)

Mast

Handles

Lifting arms

Leg / electrical leg spreading

Control box, emergency stop

and battery

Knee support

1.5 Unpacking

Check that all the parts are present and undamaged. Any suspicion of damage or shortage

should be reported to your dealer or Ergolet. We recommend that the box packaging is kept if

the stand-aid lifter is to be used on other sites or for return shipment in case of repair or annual

check.

Content of the box:

1. Leg with base for leg spreading

2. Mast and lifting arm

3. Actuator

4. Hand control with battery

5. Control box

6. Handles

7. Knee support

8. Tools (Allen key, spanner)

9. User instruction

1.6 Assembling instruction

Following step by step the assembly guidance:

1. Place the leg part on the floor and brake the

wheels. Fig. 1.6A

2. Assembly the mast/lifting arm with the leg part

and tighten the hand screw. (Fig 1.6B + 1.6C)

Fig. 1.6C

Fig. 1.6B

Fig. 1.6A

Fig. 1.6F

3. Mount the foot plate into the corresponding

holes on the leg base.(Fig. 1.6D)

4. Fit the actuator piston rod to the lifting arm.

Use the Allen key and the spanner to tighten

the bolt/nut. (Fig. 1.6E). Put the cap on the

nut.

5. Fit the handle on the mast with a screw and

tighten with the Allen key. (Fig 1.6F)

6. The hand control, lifting arm and electrical leg

spreader are connected to the control box.

(Fig 1.6G)

(See section 2.1 –functions / connection).

Fig. 1.6D

Fig. 1.6G

Fig. 1.6E

(a)

( 1 )

Fig. 1.7A

1.7 Mounting of lifting slings

The stand-aid lifter is equipped with lifting arms where there in the end is a hook, which is

designed for use with Ergolet lifting slings. Ergolets lifting slings have 4-6 lifting straps and are

designed for lifting hooks larger than ø8mm.

If using non-authorized slings Ergolet will have no responsibility for faults and accidents.

Ergolet can assist in choosing slings and their correct use.

Fitting slings on the Ergolet lifting hook

Ergolet accepts no responsibility if slings are placed incorrectly, it is always the onus of the

carer/helper to ensure that the sling is correct for the situation needs and is correctly fitted.

(1) The sling strap is placed over the hook in its open position.

(Fig. 1.7A)

(2) The strap is pulled downwards so that the hook closes.

(Fig. 1.7B)

The design of the lifting hook is such that the weight of the

patient/user will help close the hook.

To release the strap after lifting simply pull upwards to open

the hook.

Note: Risk of finger entrapment - ensure that patients’ fingers cannot get trapped.

(2)

Fig. 1.7B

2. Functions

2.1 Pictograms and functions –control-box

(1) Connecting plug - hand control

(2) Connecting plug - lifting actuator

(3) Connecting plug - electrical leg spreading

(4) Connecting plug - power supply

(5) Battery

(6) Emergency stop –See section 2.3

(7) Lift up/down –Press and the lifting arm

is lifted up. Press and the lifting arm is

lowered. Stop movement by releasing the

button.

(8) Leg spreading in/out –Press and the

leg spreading move together. Press and the

leg spreading will spread. Stop movement by

releasing the button.

(9) Charge –indicates charging on the battery

(see section 2.4).

(10) ON –indicates that main supply is on.

(11) Display –(See section 3.3)

(5)

(6)

(7)

(8)

(9)

(10)

(1)

(2)

(3)

(4)

(11)

2.2 Pictograms and functions –hand control

(1) Turtle –This function operates the lifting arm

up/down in a low speed.

(2) Max Kg –indicates an overload (see section

3.3)

(3) Hare –This function operates the lifting arm

up/down in a high speed.

(4) Leg spreading –Press and the leg

spreading move together. Press and the leg

spreading will spread.

(5) Service –See section 3.3

(6) Battery –indicates the state of the battery

(see section 2.4)

(1)

(2)

(3)

(4)

(5)

(6)

Inhaltsverzeichnis

Andere ergolet Fitnessgeräte Handbücher

ergolet

ergolet Pallas 2000 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

ergolet Stellar/160 Montageanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken