ESAB Aristo 500ix Bedienungsanleitung

Aristo® 500ix

Instruction manual

0463 696 201  GB  20221122

Valid for: Serial number: 105-, 243-,

941-xxx-xxxx

TABLE OF CONTENTS

0463 696 201 -4- © ESAB AB 2022

1 SAFETY ...................................................................................................................................... 5

1.1 Meaning of symbols .................................................................................................... 5

1.2 Safety precautions ...................................................................................................... 5

2 INTRODUCTION ......................................................................................................................... 8

2.1 Equipment.................................................................................................................... 8

3 TECHNICAL DATA ..................................................................................................................... 9

4 INSTALLATION........................................................................................................................... 11

4.1 Location........................................................................................................................ 11

4.2 Lifting instructions ...................................................................................................... 12

4.3 Mains supply................................................................................................................ 13

5 OPERATION ............................................................................................................................... 16

5.1 Connections and control devices .............................................................................. 16

5.2 Symbols ....................................................................................................................... 17

5.3 Connection of welding and return cable ................................................................... 17

5.4 Turning the power source on/off................................................................................ 17

5.5 Fan control................................................................................................................... 18

5.6 Thermal protection ...................................................................................................... 18

5.7 VRD (Voltage Reducing Device)................................................................................. 18

5.8 Remote control unit..................................................................................................... 18

5.9 Arc voltage feedback .................................................................................................. 18

6 MAINTENANCE.......................................................................................................................... 19

6.1 Routine maintenance .................................................................................................. 19

6.2 Power source............................................................................................................... 20

7 TROUBLESHOOTING ................................................................................................................ 21

8 ORDERING SPARE PARTS ....................................................................................................... 22

ORDERING NUMBERS ......................................................................................................................... 23

BLOCK DIAGRAM................................................................................................................................. 24

ACCESSORIES ..................................................................................................................................... 25

1  SAFETY

0463 696 201 -5- © ESAB AB 2022

1 SAFETY

1.1 Meaning of symbols

As used throughout this manual: Means Attention! Be Alert!

DANGER!

Means immediate hazards which, if not avoided, will result in immediate, serious

personal injury or loss of life.

WARNING!

Means potential hazards which could result in personal injury or loss of life.

CAUTION!

Means hazards which could result in minor personal injury.

WARNING!

Before use, read and understand the instruction manual and follow

all labels, employer´s safety practices and Safety Data Sheets

(SDSs).

1.2 Safety precautions

Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who works on or

near the equipment observes all the relevant safety precautions. Safety precautions must meet the

requirements that apply to this type of equipment. The following recommendations should be observed

in addition to the standard regulations that apply to the workplace.

All work must be carried out by trained personnel well-acquainted with the operation of the equipment.

Incorrect operation of the equipment may lead to hazardous situations which can result in injury to the

operator and damage to the equipment.

1. Anyone who uses the equipment must be familiar with:

• its operation

• location of emergency stops

• its function

• relevant safety precautions

• welding and cutting or other applicable operation of the equipment

2. The operator must ensure that:

• no unauthorised person is stationed within the working area of the

equipment when it is started up

• no-one is unprotected when the arc is struck or work is started with the

equipment

3. The workplace must:

• be suitable for the purpose

• be free from drafts

1  SAFETY

0463 696 201 -6- © ESAB AB 2022

4. Personal safety equipment:

• Always wear recommended personal safety equipment, such as safety

glasses, flame-proof clothing, safety gloves

• Do not wear loose-fitting items, such as scarves, bracelets, rings, etc.,

which could become trapped or cause burns

5. General precautions:

• Make sure the return cable is connected securely

• Work on high voltage equipment may only be carried out by a

qualified electrician

• Appropriate fire extinguishing equipment must be clearly marked and

close at hand

• Lubrication and maintenance must not be carried out on the equipment

during operation

WARNING!

Arc welding and cutting can be injurious to yourself and others. Take precautions when

welding and cutting.

ELECTRIC SHOCK - Can kill

• Do not touch live electrical parts or electrodes with bare skin, wet gloves

or wet clothing

• Insulate yourself from work and ground.

• Ensure your working position is safe

ELECTRIC AND MAGNETIC FIELDS - Can be dangerous to health

• Welders having pacemakers should consult their physician before welding.

EMF may interfere with some pacemakers.

• Exposure to EMF may have other health effects which are unknown.

• Welders should use the following procedures to minimize exposure to

EMF:

○ Route the electrode and work cables together on the same side

of your body. Secure them with tape when possible. Do not

place your body between the torch and work cables. Never coil

the torch or work cable around your body. Keep welding power

source and cables as far away from your body as possible.

○ Connect the work cable to the workpiece as close as possible

to the area being welded.

FUMES AND GASES - Can be dangerous to health

• Keep your head out of the fumes

• Use ventilation, extraction at the arc, or both, to take fumes and gases

away from your breathing zone and the general area

ARC RAYS - Can injure eyes and burn skin

• Protect your eyes and body. Use the correct welding screen and filter lens

and wear protective clothing

• Protect bystanders with suitable screens or curtains

NOISE - Excessive noise can damage hearing

Protect your ears. Use earmuffs or other hearing protection.

1  SAFETY

0463 696 201 -7- © ESAB AB 2022

MOVING PARTS - Can cause injuries

• Keep all doors, panels and covers closed and securely in place. Have only

qualified people remove covers for maintenance and troubleshooting as

necessary. Reinstall panels or covers and close doors when service is

finished and before starting engine.

• Stop engine before installing or connecting unit.

• Keep hands, hair, loose clothing and tools away from moving parts.

FIRE HAZARD

• Sparks (spatter) can cause fire. Make sure therefore that there are no

inflammable materials nearby

• Do not use on closed containers.

HOT SURFACE - Parts can burn

• Do not touch parts bare handed.

• Allow cooling period before working on equipment.

• To handle hot parts, use proper tools and/or insulated welding gloves to

prevent burns.

MALFUNCTION - Call for expert assistance in the event of malfunction.

PROTECT YOURSELF AND OTHERS!

CAUTION!

This product is solely intended for arc welding.

WARNING!

Do not use the power source for thawing frozen pipes.

CAUTION!

Class A equipment is not intended for use in residential locations

where the electrical power is provided by the public low-voltage

supply system. There may be potential difficulties in ensuring

electromagnetic compatibility of class A equipment in those

locations, due to conducted as well as radiated disturbances.

NOTE!

Dispose of electronic equipment at the recycling facility!

In observance of European Directive 2012/19/EC on Waste

Electrical and Electronic Equipment and its implementation in

accordance with national law, electrical and/or electronic equipment

that has reached the end of its life must be disposed of at a

recycling facility.

As the person responsible for the equipment, it is your

responsibility to obtain information on approved collection stations.

For further information contact the nearest ESAB dealer.

ESAB has an assortment of welding accessories and personal protection equipment for

purchase. For ordering information contact your local ESAB dealer or visit us on our website.

2  INTRODUCTION

0463 696 201 -8- © ESAB AB 2022

2 INTRODUCTION

The power source Aristo®500ix combined with U6, U82or MA25 Pulse panels offer a complete

multi-process package supporting MIG, pulse MIG, TIG and gouging, depending on which feeder it is

used with.

The power source is intended for use with the wire feed unit RobustFeed U6, RobustFeed U82,

RobustFeed Pulse, Feed 3004/4804 or YardFeed 2000 and the cooling unit COOL2. For more

information about the feed units and the cooling unit, refer to the Instruction information for the specific

product.

ESAB accessories for the product can be found in the "ACCESSORIES" chapter of this manual.

2.1 Equipment

The power source is supplied with:

• 5m (16ft) return cable with earth clamp

• 5m (16ft) mains cable

• Instruction manual

• Safety instruction manual

• Quick start quide

3  TECHNICAL DATA

0463 696 201 -9- © ESAB AB 2022

3 TECHNICAL DATA

Aristo®500ix

Mains voltage 380-460V, ±10%, 3~ 50/60Hz

Mains supply Sscmin 7.2 MVA

Primary current Imax 380V 400V 460V

MIG/MAG 38A 35A 30A

MMA 40A 35A 31A

TIG 30A 27A 24A

Idle power 24W 25W 27W

Setting range (DC)

MIG/MAG 16A / 14.8V - 500A / 39V

MMA 16A / 20.6V - 500A / 40V

TIG 5A / 10.2V - 500A / 30V

Permissible load at MIG/MAG

60 % duty cycle 500A / 39.0V

100% duty cycle 400A / 34.0V

Permissible load at MMA

60 % duty cycle 500A / 40.0V

100% duty cycle 400A / 36.0V

Permissible load at TIG

60 % duty cycle 500A / 30.0V

100% duty cycle 400A / 26.0V

Power factor at maximum current 0.91

Efficiency at maximum current 88 %

Open circuit voltage 58V

Operating temperature -20 to 40°C (-4 to 104°F)

Transport temperature -20 to 55°C (-4 to 131°F)

Constant sound pressure when

idling

<70dB (A)

Dimensions l×w×h 712 × 325 × 470mm (28.0 × 12.8 × 18.5in.)

Weight 58.5kg (128.9lb)

Insulation class H

Enclosure class IP23

Application classification

Mains supply, Ssc min

Minimum short circuit power on the network in accordance with IEC 61000-3-12.

Duty cycle

The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or cut at a

certain load without overloading. The duty cycle is valid for 40°C/104°F, or below.

3  TECHNICAL DATA

0463 696 201 - 10 - © ESAB AB 2022

Enclosure class

The IP code indicates the enclosure class, i.e. the degree of protection against penetration by solid

objects or water.

Equipment marked IP23 is intended for indoor and outdoor use.

Application class

The symbol indicates that the power source is designed for use in areas with increased electrical

hazard.

Class-H insulations can withstands a temperature of up to 180°C. It is made of inorganic material

glued with silicone resin or adhesives of equivalent performance.

Inhaltsverzeichnis

Andere ESAB Schweißsystem Handbücher

ESAB

ESAB Origo Tig 4300iw AC/DC Bedienungsanleitung

ESAB

ESAB Caddy Tig 1500i VRD Bedienungsanleitung

ESAB

ESAB Rustler EM 201C Bedienungsanleitung

ESAB

ESAB Caddy Arc 201i Bedienungsanleitung

ESAB

ESAB PT-26 Bedienungsanleitung

ESAB

ESAB A6 TFD1 Gebrauchsanweisung

ESAB

ESAB LTR 160 Bedienungsanleitung

ESAB

ESAB Origo Arc 458T Leitfaden

ESAB

ESAB PKB 250 Bedienungsanleitung

ESAB

ESAB EMP 205ic AC/DC Bedienungsanleitung

ESAB

ESAB LAF 1001 Bedienungsanleitung

ESAB

ESAB Rogue EMP 210 PRO Bedienungsanleitung

ESAB

ESAB Aristo MechTig 3000i Bedienungsanleitung

ESAB

ESAB Warrior 750i CC/CV Bedienungsanleitung

ESAB

ESAB CIGWELD WeldSkill 205AC/DC Bedienungsanleitung

ESAB

ESAB ES 180i Bedienungsanleitung

ESAB

ESAB Caddy Arc 151i Bedienungsanleitung

ESAB

ESAB Caddy Tig 2200i AC/DC Bedienungsanleitung

ESAB

ESAB Aristo Mig WeldCloud U5000i Bedienungsanleitung

ESAB

ESAB Cutmaster 100 Bedienungsanleitung

ESAB

ESAB Miniarc 150 Bedienungsanleitung

ESAB

ESAB Feed L302 Origo M08 Bedienungsanleitung

ESAB

ESAB Aristo WeldCloud Mig U5000i Bedienungsanleitung

ESAB

ESAB PLASMAWELD 202 Bedienungsanleitung

Beliebte Schweißsystem Handbücher anderer Marken

Berner

Berner PLASMACUT 54 Bedienungsanleitung

Pro Spot

Pro Spot PR-155 Bedienungsanleitung

Forney

Forney 210 Bedienungsanleitung

Thermal Arc

Thermal Arc 400S Bedienungsanleitung

Lincoln Electric

Lincoln Electric HANDYMIG 170I Bedienungsanleitung

GYS

GYS PROTIG 201 AC/DC Bedienungsanleitung

TAFA

TAFA 30*8B35 Bedienungsanleitung

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung

CIGWELD

CIGWELD 636804 Kurzanleitung

Red-D-Arc

Red-D-Arc DC-400 Bedienungsanleitung

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung

Elettro

Elettro HI-MIG 3000 SYNERGIC Bedienungsanleitung

WIA

WIA Weldmatic 270 CP132-2 Bedienungsanleitung

Sonics

Sonics H520T Bedienungsanleitung

Miller

Miller Big Blue 400D Bedienungsanleitung

NewArc

NewArc RT2000 Kurzanleitung

Hypertherm

Hypertherm powermax1000 Bedienungsanleitung

Lincoln Electric

Lincoln Electric POWER WAVE I400 Bedienungsanleitung