EtherWAN EX42008 Series Bedienungsanleitung

W70G-EX42008Q1 Page 1

Installation Guide

EX42008 Series | Hardened Unmanaged Switch

1Unpacking

Open the carton and unpack the items. Your package

should include:

▪One EX42008 Switch

If any items are missing or damaged, notify your

EtherWAN representative. If possible, save the carton

and packing material in case you need to ship or store

the switch in the future.

2Equipment Needed

▪Category 5 or better cable for RJ-45 ports

▪Appropriate fiber cable for fiber ports

3Select a Location

▪Installation: DIN rail. Place the device on the DIN

rail from above using the slot. Push the front of

the device toward the mounting surface until it

audibly snaps into place.

▪Choose a dry area with ambient temperature

between -40 and 75°C (-40 and 167°F).

▪Keep away from heat sources, sunlight, warm air

exhausts, hot-air vents, and heaters.

▪Be sure there is adequate airflow.

4Connect to the Data Ports

Depending on the model, your switch can have the

following ports:

▪10/100Base-TX Ports

▪100Base-FX Port (Optional)

5Connect Power

Power is supplied via a 12-48VDC terminal block

connected to a DC power cord. The terminal block has

7 terminal posts. Power consumption is 2.47W Max.

State

Description

Power 1

12-48VDC

Power Ground

Power 2

12-48VDC

Power Ground

Earth Ground

Relay Output Rating

0.6A @ 30VDC

Power-Up Sequence

When the switch is powered up:

▪All Link/ACT LEDs blink momentarily.

▪The Power LED lights up and stays lit.

▪LEDs for every port connected to a device will

flash, as the switch conducts a brief Power On Self-

Test (POST).

6DIP Switch Settings

7Port Status LED Indicators

DIP

Off

1~8

Port 1~8 Alarm

Enable

Port 1~8 Alarm

Disable

W70G-EX42008Q1 Page 2

Installation Guide

EX42008 Series | Hardened Unmanaged Switch

LED

State

Description

Power 1, 2

(Green)

Switch is powered ON

correctly

Off

Switch is not receiving power

Alarm (Red)

Relay alarm on

Off

Relay alarm off

10/100TX or 100FX/BX Ports

Link/Act

(Green)

Valid network connection

established

Off

No link

Blinking

Transmitting or receiving data

8DIN Rail Installation

DIN-Rail Assembly Startup, and Dismantling

▪Assembly: Place the Switch on the DIN rail from

above using the slot. Push the front of the Switch

toward the mounting surface until it audibly snaps

into place.

▪Startup: Connect the supply voltage to start up the

Switch via the terminal block.

▪Dismantling: Pull out the lower edge and then

remove the Switch from the DIN rail.

Manufacturer information:

EtherWAN Systems, Inc.

33F, No. 93, Sec. 1, Xintai 5th Rd., Xizhi Dist., New

Taipei City, 221 Taiwan

The full product manual can be downloaded from:

www.etherwan.com

Andere Handbücher für EX42008 Series

Andere EtherWAN Schalten Handbücher

EtherWAN

EtherWAN EX19082 Bedienungsanleitung

EtherWAN

EtherWAN EX17082 Bedienungsanleitung

EtherWAN

EtherWAN EX78000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX75900 Series Bedienungsanleitung

EtherWAN

EtherWAN EX1624W Bedienungsanleitung

EtherWAN

EtherWAN EX26262F Bedienungsanleitung

EtherWAN

EtherWAN EX26484 Series Bedienungsanleitung

EtherWAN

EtherWAN EG97203 Series Bedienungsanleitung

EtherWAN

EtherWAN EX42000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX77000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX16926 Bedienungsanleitung

EtherWAN

EtherWAN EX34000 Bedienungsanleitung

EtherWAN

EtherWAN EX19164 Bedienungsanleitung

EtherWAN

EtherWAN EX70900 Bedienungsanleitung

EtherWAN

EtherWAN EX45000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX77964 Bedienungsanleitung

EtherWAN

EtherWAN EX61000A Bedienungsanleitung

EtherWAN

EtherWAN EX75000 Bedienungsanleitung

EtherWAN

EtherWAN EX43000 series Bedienungsanleitung

EtherWAN

EtherWAN EX78162 Series Bedienungsanleitung

EtherWAN

EtherWAN InfraGreEn IG5 Bedienungsanleitung

EtherWAN

EtherWAN EX76000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX17016 Bedienungsanleitung

EtherWAN

EtherWAN EX73900 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung