EtherWAN EX63000 Series | Bedienungsanleitung

W70G-EX630V2Q2 Page 1

Installation Guide

EX63000 Series | Hardened Managed Switch

1Unpacking

Unpack the items. Your package should include:

One EX63000 Series hardened managed switch

If items are missing or damaged, notify your

EtherWAN representative. Keep

the carton and packing material.

The full product manual can be

downloaded from:

www.etherwan.com

2Equipment Needed

▪Appropriate cables for data ports

▪Personal computer or laptop

3Select a Location

▪Installation: DIN rail, wall mount, rack, or cabinet.

▪Identify a power source within 6 ft. (1.8m).

▪Choose a dry area with ambient temperature

between -10 and 60°C (14 and 140ºF).

▪Be sure there is adequate airflow.

▪Keep the switch at least 6 ft. (1.83m) away from

the nearest source of electromagnetic noise, such

as a photocopy machine.

▪Switch is designed for use in Pollution Degree 2

Environment.

4Connect to the Data Ports

Depending on the model, your switch can have the

following ports:

▪16 10/100Base-TX ports

▪0 or 2 Gigabit ports

10/100Base-TX Ports

These ports come in 10/100Base-TX interfaces. They

can connect to devices such as an IP surveillance

camera or a Voice over Internet Protocol (VoIP)

phone.

Gigabit Ports

Some switch models have 10/100/1000Base-TX

ports with no Gigabit fiber ports, or combo

10/100/1000Base-TX with 1000Base-SX/LX/BX

ports.

Combo ports on the bottom face operate in

“either/or” fashion. This means that attaching to a 1

Gbps combo port renders the equivalent partner

combo port unavailable.

5Apply Power

The switch has a 12-48VDC terminal block. Only one

power input is required to operate the switch.

However, redundant power supply functionality is

supported.

Terminal Block

The switch provides two power inputs on a 12-

48VDC terminal block. Only one power input is

required to operate the switch. The terminal block

has 5 terminal posts.

Combo Ports

W70G-EX630V2Q2 Page 2

Installation Guide

EX63000 Series | Hardened Managed Switch

Description

Power 2

12-48VDC

−

Power Ground

Power 1

12-48VDC

−

Power Ground

Earth Ground

Relay Output Rating

0.6A @ 30VDC

Power-Up Sequence

When you apply power, all Link/ACT LEDs will light

up, and stay lit as the device boots up. When the

boot process is finished, only LEDS next to

connected ports will stay lit.

The Power 1/2 LEDs will light up to show the

connected power inputs.

Relay Output

The switch is equipped with a 3-point relay output.

Current is 30VCD / 0.6A

Relay Status

Normally closed

Normally Open

No Power

Closed

Open

Normal

Open

Closed

Abnormal

Closed

Open

6Front Panel LEDs

LED

Color

Status

Power1

Power2

Green

ON = power on.

OFF = power off.

10/100Base-TX LEDs

Link/Act

Green

ON = valid network

connection is established.

Flashing = port sending or

receiving data.

10/100/1000Base-TX LEDs

Link/Act

Green

ON = valid network

connection is established.

Flashing = port sending or

receiving data.

1000Base-SX/LX/BXLEDs

Link/Act

Orange

ON = valid network

connection is established.

Flashing = port sending or

receiving data.

7Managing the Switch

Connect a PC to an available switch port using an

appropriate cable.

Confirm that the Link/ACT LED for the switch port

to which the PC is connected is ON. If not, choose a

different port.

Configure the PC’s TCP/IP settings to use the subnet

192.168.1.Xand subnet mask 255.255.255.0, where

Xis a number from 2 to 254 other than 10.

In a Web browser address bar, type

http://192.168.1.10 and press Enter.

username is root, no password.

Manufacturer information:

EtherWAN Systems, Inc.

33F, No. 93, Sec. 1, Xintai 5th Rd., Xizhi Dist., New

Taipei City, 221 Taiwan

The full product manual can be downloaded from:

www.etherwan.com

Andere EtherWAN Schalten Handbücher

EtherWAN

EtherWAN EX76000 Series Bedienungsanleitung

EtherWAN

EtherWAN InfraGreEn IG5 Bedienungsanleitung

EtherWAN

EtherWAN EX78900X Series Bedienungsanleitung

EtherWAN

EtherWAN EX41941F Bedienungsanleitung

EtherWAN

EtherWAN EX42000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX26262F Series Bedienungsanleitung

EtherWAN

EtherWAN EX83000 Bedienungsanleitung

EtherWAN

EtherWAN EX17016 Bedienungsanleitung

EtherWAN

EtherWAN EX73900X Series Bedienungsanleitung

EtherWAN

EtherWAN EX78162 Series Bedienungsanleitung

EtherWAN

EtherWAN TG103H Bedienungsanleitung

EtherWAN

EtherWAN EX77000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX34000 Bedienungsanleitung

EtherWAN

EtherWAN EX78000R Bedienungsanleitung

EtherWAN

EtherWAN EX41922 Bedienungsanleitung

EtherWAN

EtherWAN EG97000 Series Bedienungsanleitung

EtherWAN

EtherWAN EX78900E Series Bedienungsanleitung

EtherWAN

EtherWAN EX17162A Bedienungsanleitung

EtherWAN

EtherWAN EX27000 Series Bedienungsanleitung

EtherWAN

EtherWAN OttoE TG103 Series Bedienungsanleitung

EtherWAN

EtherWAN EX42395BT Bedienungsanleitung

EtherWAN

EtherWAN EX16908 Bedienungsanleitung

EtherWAN

EtherWAN SmartE Series Bedienungsanleitung

EtherWAN

EtherWAN EX46900A Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung