EtherWAN EX45900 series Bedienungsanleitung
EX45900 series www.etherwan.com
Quick Start Guide
This quick start guide describes how to install and use the
Hardened PoE Gigabit Ethernet Switch. Capable of operating
at temperature extremes of -40°C to +75°C, this is the switch
of choice for harsh environments constrained by space.
Physical Description
The Port Status LEDs
1
EX45900 series www.etherwan.com
LED State Indication
Steady Power on.
Power (Green) Off Power off.
Steady Relay starts alarm.
Fault (Red) Off Relay non-alarm.
Gigabit Ports
Steady A valid network connection established.
10/100Mbps: Green, 1000Mbps: Amber.
Blinking Transmitting or receiving data.
Act stands for Activity.
Link/Act
Off No link.
Steady Powered Device is connected.
Off Powered Device is disconnected.
PoE (Amber)
Blinking While Powered Device over 30W.
The Terminal Block and Power Inputs
Power Input Assignment
＋24/48VDC
Power1
－Power Ground
＋24/48VDC
Power2
－Power Ground
Earth Ground
Terminal Block
Relay Output Rating 1A @ 250VAC
DC Terminal Block Power Input: The DC Terminal Block
power input can be used to power up this Switch.
2
EX45900 series www.etherwan.com
DIP Switch Settings
On OffDIP No.
1 Port 1 Alarm Enable. 1 Alarm Disable.Port
2 Port 2 Alarm Enable. Port 2 Alarm Disable.
3 Port 3 Alarm Enable. Port 3 Alarm Disable.
4 Port 4 Alarm Enable. Port 4 Alarm Disable.
5 Port 5 Alarm Enable. Port 5 Alarm Disable.
6
(Only for EX45915) Port 6 Alarm Enable. Port 6 Alarm Disable.
7 Broadcast Storm Enable. le.Broadcast Storm Disab
8 Jumbo Frame Enable. Jumbo Frame Disable.
he 1000Base-TX (PoE) and Gigabit Ethernet
se-TX Connections Base-TX ports.
T
Connectors
1. The 1000Ba
The following lists the pinouts of 1000
3
EX45900 series www.etherwan.com
Pin Signal Name Signal Definition
1 TP0＋Transmit and Receive Data 0 ＋
2 TP0－Transmit and Receive Data 0 －
3 TP1＋Transmit and Receive Data 1 ＋
4 TP2＋Transmit and Receive Data 2 ＋
5 TP2－Transmit and Receive Data 2 －
6 TP1－Transmit and Receive Data 1 －
7 TP3＋Transmit and Receive Data 3 ＋
8 TP3－Transmit and Receive Data 3 －
2. The SFP Socket Connections
The SFP socket for Gigabit fiber optic expansion.
3. The 1000Base-SX/LX Connections
The fiber port pinouts: The Tx (transmit) port of device I is
connected to the Rx (receive) port of device II, and the Rx
(receive) port of device I to the Tx (transmit) port of device II.
4. The WDM 1000Base-BX Connections
The fiber port pinouts: Only one optical fiber is required to
transmit and receive data.
4
EX45900 series www.etherwan.com
Functional Description
Complies with EN61000-6-2 & EN61000-6-4 EMC
Generic standard immunity for industrial environment.
Supports 802.3/802.3u/802.3ab/802.3z/802.3x.
Auto-negotiation: 10/100/1000Mbps, Full/Half-duplex.
Auto MDI/MDIX.
1000Base-SX/LX: Multi mode SC or ST type, Single
mode SC type. 1000Base-BX: WDM Single mode SC
type.
Supports 8192 MAC addresses, 1M bits buffer memory.
Supports IEEE802.3az Energy Efficient Ethernet
(EEE).
High speed, non-blocking four traffic class QoS switch
fabric.
Supports Jumbo frame up to 10K Bytes.
Enable Broadcast Storm Protection by DIP Switch No.
7 to limit 15,000 packets per second.
Port 1~4 support IEEE802.3at Power over Ethernet
(PoE) Power Sourcing Equipment (PSE) and provide
power up to 30W.
Power consumption: 7W Max (Device only, without
PoE).
PoE power budget: 120W.
Power Supply: Redundant 24/48VDC Terminal Block
power inputs.
Operating temperature ranges from -40°C to 75°C
(-40°F to 167°F).
Slim design with DIN-Rail mount installation.
5
EX45900 series www.etherwan.com
Assembly, Startup, and Dismantling
Assembly: Place the switch on the DIN rail from above
using the slot. Push the front of the switch toward the
mounting surface until it audibly snaps into place.
Startup: Connect the supply voltage to start up the
switch via the terminal block.
Dismantling: Pull out the lower edge and then remove
the switch from the DIN rail.
6
EX45900 series www.etherwan.com
7
Preface
This manual describes how to install and use the Hardened
PoE Gigabit Ethernet Switch. This switch introduced here is
capable of operating at temperature extremes of -40°C to
+75°C, this is the switch of choice for harsh environments
constrained by space.
Port 1 to port 4 on this switch supports IEEE802.3at Power
over Ethernet (PoE) Power Sourcing Equipment (PSE) and
can detect an IEEE802.3at compliant Powered Device (PD).
Using external 48VDC power inputs through Terminal Block,
data and power can be transmitted to a Powered Device (PD)
over the same twisted-pair Ethernet cable through port 1 to
port 4 on the switch.
To get the most out of this manual, you should have an
understanding of Ethernet networking concepts.
In this manual, you will find:
Features on the switch
Illustrative LED functions
Installation instructions
Specifications
EX45900 series www.etherwan.com
8
Table of Contents
QUICK START GUIDE 1
PHYSICAL DESCRIPTION 1
The Port Status LEDs 1
The Terminal Block and Power Inputs 2
DIP Switch Settings 3
The 1000Base-TX (PoE) and Gigabit Ethernet Connectors 3
FUNCTIONAL DESCRIPTION 5
ASSEMBLY,STARTUP,AND DISMANTLING 6
PREFACE 7
TABLE OF CONTENTS 8
PRODUCT OVERVIEW 9
HARDENED POEGIGABIT ETHERNET SWITCH 9
PACKAGE CONTENTS 9
PRODUCT HIGHLIGHTS 10
Basic Features 10
FRONT PANEL DISPLAY 11
PHYSICAL PORTS 12
INSTALLATION 13
SELECTING A SITE FOR THE SWITCH 13
DIN RAIL MOUNTING 14
CONNECTING TO POWER 15
DC Terminal Block Power Inputs 15
CONNECTING TO YOUR NETWORK 16
Cable Type & Length 16
Cabling 17
SPECIFICATIONS 18
EX45900 series www.etherwan.com
Product Overview
Hardened PoE Gigabit Ethernet Switch
Package Contents
When you unpack the product package, you shall find the
items listed below. Please inspect the contents, and report
any apparent damage or missing items immediately to your
authorized reseller.
This Switch
User’s Manual
9
EX45900 series www.etherwan.com
10
Product Highlights
Basic Features
Complies with EN61000-6-2 & EN61000-6-4 EMC
Generic standard immunity for industrial environment.
Supports 802.3/802.3u/802.3ab/802.3z/802.3x.
Auto-negotiation: 10/100/1000Mbps, Full/Half-duplex.
Auto MDI/MDIX.
1000Base-SX/LX: Multi mode SC or ST type, Single
mode SC type. 1000Base-BX: WDM Single mode SC
type.
Supports 8192 MAC addresses, 1M bits buffer memory.
Supports IEEE802.3az Energy Efficient Ethernet
(EEE).
High speed, non-blocking four traffic class QoS switch
fabric.
802.1Q VLAN Tag Based Priority, Class of Service.
Output Queue Schedule Mode: Weighted Round Robin
(WRR) with 4 priority queues.
The configurations of QoS are as below:
CoS Field Value Packet Count Priority
0 or 1 1 Lowest
2 or 3 2 Low
4 or 5 4 High
6 or 7 8 Highest
Supports Jumbo frame up to 10K Bytes.
Enable Broadcast Storm Protection by DIP Switch No.
7 to limit 15,000 packets per second.
Port 1~4 support IEEE802.3at Power over Ethernet
(PoE) Power Sourcing Equipment (PSE) and provide
power up to 30W.
Power consumption: 7W Max (Device only, without
PoE).
PoE power budget: 120W.
Inhaltsverzeichnis
Andere EtherWAN Schalten Handbücher
EtherWAN
EtherWAN EX43000 series Bedienungsanleitung
EtherWAN
EtherWAN EX45000 Series Bedienungsanleitung
EtherWAN
EtherWAN InfraGreEn IG5 Bedienungsanleitung
EtherWAN
EtherWAN EX32008 Series Bedienungsanleitung
EtherWAN
EtherWAN EX1624W Bedienungsanleitung
EtherWAN
EtherWAN L-EX17008A Bedienungsanleitung
EtherWAN
EtherWAN EX32008 Series Bedienungsanleitung
EtherWAN
EtherWAN EX19082 Bedienungsanleitung
EtherWAN
EtherWAN OttoE TG103 Series Bedienungsanleitung
EtherWAN
EtherWAN EX46900A Series Bedienungsanleitung
EtherWAN
EtherWAN EX34000 Bedienungsanleitung
EtherWAN
EtherWAN EX41941 Bedienungsanleitung
EtherWAN
EtherWAN EG99000 Series Bedienungsanleitung
EtherWAN
EtherWAN EX87000 Series Bedienungsanleitung
EtherWAN
EtherWAN EX16908 Bedienungsanleitung
EtherWAN
EtherWAN EX78900X Series Bedienungsanleitung
EtherWAN
EtherWAN EX38000 Series Bedienungsanleitung
EtherWAN
EtherWAN EX93000 Bedienungsanleitung
EtherWAN
EtherWAN EX19164 Bedienungsanleitung
EtherWAN
EtherWAN EX89000 Bedienungsanleitung
