Exsys EX-3517R Bedienungsanleitung

Thank you for purchasing this 4-Port SATA3 RAID PCI PCIe Card. It is designed to

support up to 4 SATA3 ports with a built-in SATA3 RAID controller. It supports 4

SATA3 hard drives (or SSD) over one single PCI Express Slot and provides hardware

RAID 0, 1, 10, 3, 5 modes for your system.

Features:

✓Supports 2-lane PCIe Gen 2 up to 10Gb/s

✓Provides 4 Internal SATA3 Drives with 2 Double Deck Connectors

✓Supports Hardware RAID 0, 1, 10, 3, 5 Modes

✓Supports Low Profile Form Factor

✓Supports SATA3 transfer rate at 6.0Gb/s

✓Provides Windows RAID GUI for RAID Management

✓Co-resides with Motherboard IDE and SATA devices

✓Supports Win 2003, 2008, XP, Vista, Win 7, 8.x, 10,

Linux and Mac OS

EX-3517R

4-Port SATA3 Hardware RAID PCIe (x2) Card

1. Introduction

2. Board Layout

Low Profile

Bracket

Up: Port 2

Down: Port 1

Up: Port 4

Down: Port 3

Gen 2 PCIe (x2)

Golden Fingers

4-Port SATA3 Hardware RAID PCIe (x2) Card

1. Power down the peripherals, then the computer.

2. Remove the computer cover and save the screws.

3. Choose an unused PCI Express bus slot.

4. Unscrew and remove the slot cover. Retain the screw; you will use it when you

install the SATA3 PCIe RAID Card.

5. Place the SATA3 PCIe RAID Card into the slot. Carefully press the board into

the slot until it seats firmly.

6. Secure the SATA3 PCIe RAID Card with the slot cover screw.

7. Install the internal SATA cables from the SATA connectors of the PCIe RAID

Card to your SATA hard drives.

8. Carefully reinstall the computer cover. Insert and tighten the computer cover

screws.

9. Power up the PC and observe the monitor. The BIOS lists all Serial ATA hard

drives attached to the SATA3 PCIe RAID Card. For example:

If the information displayed on your screen is correct (the installed devices are

listed with the correct device name, etc.), congratulations! You have

successfully installed the SATA3 PCIe RAID Card in your computer.

3. Hardware Installation

Asmedia 106x SATA Controller Ver 1.50 AHCI Mode

reserved. S.M.A.R.T. Supported

Using PCIE Gen2 x2

Firmware version 150910_00_00_00

Port PMP Model

0 0 KINGSTON SHFS37A120G SATA3

4 0 KINGSTON SHFS37A120G SATA3

5 0 ST3000DM001-9YN166 SATA3

6 0 ST3000DM001-9YN166 SATA3

4-Port SATA3 Hardware RAID PCIe (x2) Card

The SATA3 PCIe RAID Card supports Advanced Host Controller Interface (AHCI)

mode which gives software developers and hardware designers a standard method

for detecting, configuring, and programming SATA/AHCI adapters. It exposes

SATA's advanced capabilities (such as hot swapping and native command queuing)

so it does not need extra drivers for the modern operating systems. The following

table lists the operation system supported:

Operating Systems

Support

Windows Server 2012

Yes

Windows Vista (x86, x64)

Yes

Windows 7 (x86, x64)

Yes

Windows 8.x (x86, x64)

Yes

Windows 10.x (x86, x64)

Yes

Mac OS

Yes

Linux Based

Yes (with Kernel 2.6.19 or later)

The PCIe RAID Card hardware has two portions, one is the PCIe to SATA3

host interface which supports AHCI mode. The other is a SATA3 hardware

RAID controller which combines the 4 SATA3 hard drives to specific RAID

mode by the RAID GUI management utility.

4. Software Installations Win2000/XP/2003/Vista/Win7

Installation

4-Port SATA3 Hardware RAID PCIe (x2) Card

Install the Hardware RAID Management Utility:

1. Insert the driver DVD, run the setup.exe file on the DVD (as

administrator), the location of the setup.exe file as follows:

\SATA_RAID\JMB390\Windows_Utility

4-Port SATA3 Hardware RAID PCIe (x2) Card

2. Follow the onscreen instructions until the installation is completed.

3. After reboot, you can run it by click its application icon in the notification tray

located at the bottom right corner of the screen or simply double-click the

short-cut icon on the desktop.

4. To make sure the HW RAID Manager to be always executed as administrator

privilege, please right-click on the “JMicron HW RAID Manager”short-cut icon

on the desktop, choose “Properties”, click “Compatibility” tab, enable the

“Run this program as an administrator” option of the privilege level then

click OK. Please see the following screen shot:

4-Port SATA3 Hardware RAID PCIe (x2) Card

Once JMB39X HW RAID Manager is launched, the JMB39X HW RAID Manager GUI

window will be opened. For the consideration of different user experiences and

achieving the ease of navigation, the main GUI is divided into two modes (“Basic

mode” and “Advance mode”).

Basic Mode: Click the following buttons to do basic RAID configuration and

browse all disks and RAID information as well as the event logs:

Advanced Mode: It provides 3 buttons for Email Notification and Event

Settings, advanced RAID Configuration and Firmware Update:

5. Using JMB39X HW RAID Manager

4-Port SATA3 Hardware RAID PCIe (x2) Card

Note: For detail operations of configuring your disk array with the RAID

Manager, please read the JMB39X Raid manager user guide.pdf file included in the

same folder as the software.

4-Port SATA3 Hardware RAID PCIe (x2) Card

Inhaltsverzeichnis

Andere Exsys PCI-Karte Handbücher

Exsys

Exsys EX-44140-2 Bedienungsanleitung

Exsys

Exsys EX-6410 Bedienungsanleitung

Exsys

Exsys EX-6450 Bedienungsanleitung

Exsys

Exsys EX-41054 Bedienungsanleitung

Exsys

Exsys EX-S91002 Bedienungsanleitung

Exsys

Exsys EX-11092-2 Bedienungsanleitung

Exsys

Exsys EX-11042 Bedienungsanleitung

Exsys

Exsys EX-6069 Bedienungsanleitung

Exsys

Exsys EX-16500E Bedienungsanleitung

Exsys

Exsys EX-44384 Bedienungsanleitung

Exsys

Exsys EX-44062 Bedienungsanleitung

Exsys

Exsys EX-44160 Bedienungsanleitung

Exsys

Exsys EX-41011 Bedienungsanleitung

Exsys

Exsys EX-41051 Bedienungsanleitung

Exsys

Exsys EX-1083 Bedienungsanleitung

Exsys

Exsys EX-11087 Bedienungsanleitung

Exsys

Exsys EX-6072-4K Bedienungsanleitung

Exsys

Exsys EX-41062 Bedienungsanleitung

Exsys

Exsys EX-45362 Bedienungsanleitung

Exsys

Exsys EX-44064 Bedienungsanleitung

Exsys

Exsys EX-41016-2WO Bedienungsanleitung

Exsys

Exsys EX-11066 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Exsys

Exsys EX-12005 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung

Alpha Networks

Alpha Networks WMP-A13V Bedienungsanleitung