Extech Instruments CO10 Bedienungsanleitung

User's Guide

Carbon Monoxide Meter

Model CO10

Introduction

Congratulations on your purchase of the Extech C010 Carbon Monoxide Meter. The

CO10 detects the presence of carbon monoxide (CO) and measures and displays

concentrations between 0 and 1000 parts per million (ppm). Careful use of this meter will

provide years of reliable service.

CO10 V1.1 05/03

Safety Information

Carbon monoxide is life threatening even at relatively low

concentrations; learn and recognize the effects of CO poisoning (see

Table below). Do not use this meter as a personal safety monitoring

device.

Effects of CO poisoning

0-1 PPM Normal background levels

9 PPM Maximum indoor air quality level

35 PPM Maximum 8 hour average exposure level

200 PPM Mild headache, fatigue, nausea and dizziness

400 PPM Frontal headache, life threatening after 3 hours

800 PPM Dizziness, nausea, convulsions, DEATH WITHIN 2 TO 3 HOURS

1600 PPM Nausea within 20 minutes, DEATH WITHIN 1 HOUR

12800 PPM DEATH WITHIN 2 TO 3 MINUTES

Meter Description

1. LCD display

2. Power ON/OFF key

3. MAX key

4. Hold key

5. Backlight key

6. Sensor

7. Battery compartment

CO10 V1.1 05/03

Operation

MEASUREMENTS

IMPORTANT: Ensure that the meter is turned on in an area free of CO. If not, the

meter will read incorrectly when subsequently measuring CO.

Press the ON/OFF key once to turn the meter on. The meter will perform a short self-test.

To turn the meter off, press the ON/OFF key. If the meter is left on, the meter will

automatically power off after 15 minutes to conserve battery life.

To use the meter, trace the CO10 around the area of the suspected leak.

The meter will indicate the presence of CO (in ppm) on the LCD display. An audible beep

will sound at 35 ppm alerting the user that the threshold of dangerous CO levels has been

detected. The higher the concentration of CO, the faster the beeper will sound. Above

200PPM the beeper will sound continuously.

HOLD

Press the HOLD button to freeze the reading in the display. The hold icon will appear in the

display. Press the HOLD button again to return to normal operation.

MAX

Press the MAX button to hold the highest reading. The MAX icon will appear in the display.

When in max mode the meter only displays the highest CO level it has detected. Press the

MAX button again to return to normal operation.

BACKLIGHT

Press the backlight key to turn the display backlight on. Press the backlight button to turn

the backlight off.

Specifications

Measurement range 0-1000 ppm

Resolution 1 ppm

Sampling rate

Accuracy ±5% or ±10 ppm (whichever is greater)

Sensor Type Stabilized electrochemical Gas-specific (CO)

Sensor Life (Typical) 3 years

Warm-up Period <2 seconds

Power supply 9V Battery (NEDA 1604 or IEC6F22)

Battery life Approx. 50 hours with alkaline battery

Operating Temperature 32 to 122oF (0 to 50oC)

Storage Temperature -22 to 140oF (-30 to 60oC)

Operating Humidity 5 to 95% RH (non condensing)

Dimensions 6.3 x 2.2 x 1.57” (160 x 56 x 40mm)

Weight 6.35oz (180g)

CO10 V1.1 05/03

Support Hotline (781) 890-7440

Tech support: Ext. 200; Email: [email protected]

Repair/Returns: Ext. 210; Email: [email protected]

Website: www.extech.com

Warranty

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one

year from date of shipment (a six month limited warranty applies on sensors and cables). If it should become necessary to

return the instrument for service during or beyond the warranty period, contact the Customer Service Department at (781)

890-7440 ext. 210 for authorization or visit our website at www.extech.com (click on ‘Contact Extech’ and go to ‘Service

Department’ to request an RA number). A Return Authorization (RA) number must be issued before any product is returned

to Extech. The sender is responsible for shipping charges, freight, insurance and proper packaging to prevent damage in

transit. This warranty does not apply to defects resulting from action of the user such as misuse, improper wiring, operation

outside of specification, improper maintenance or repair, or unauthorized modification. Extech specifically disclaims any

implied warranties or merchantability or fitness for a specific purpose and will not be liable for any direct, indirect, incidental

or consequential damages. Extech's total liability is limited to repair or replacement of the product. The warranty set forth

above is inclusive and no other warranty, whether written or oral, is expressed or implied.

Calibration and Repair Services

Extech offers repair and calibration services for the products we sell. Extech also provides NIST certification for most products.

Call the Customer Service Department for information on calibration services available for this product. Extech recommends

that annual calibrations be performed to verify meter performance and accuracy.

Inhaltsverzeichnis

Andere Extech Instruments Messgerät Handbücher

Extech Instruments

Extech Instruments 45118 Bedienungsanleitung

Extech Instruments

Extech Instruments 45320 Bedienungsanleitung

Extech Instruments

Extech Instruments 480823 Bedienungsanleitung

Extech Instruments

Extech Instruments EasyView EA30 Bedienungsanleitung

Extech Instruments

Extech Instruments 461893 Bedienungsanleitung

Extech Instruments

Extech Instruments 461895 Bedienungsanleitung

Extech Instruments

Extech Instruments HD750 Bedienungsanleitung

Extech Instruments

Extech Instruments AN510 Bedienungsanleitung

Extech Instruments

Extech Instruments 407730 Bedienungsanleitung

Extech Instruments

Extech Instruments EX845 Bedienungsanleitung

Extech Instruments

Extech Instruments MO257 Bedienungsanleitung

Extech Instruments

Extech Instruments HDV-WTX2 Abmessungen

Extech Instruments

Extech Instruments MO50 Bedienungsanleitung

Extech Instruments

Extech Instruments MO53 Bedienungsanleitung

Extech Instruments

Extech Instruments PQ3450-30 Bedienungsanleitung

Extech Instruments

Extech Instruments HT200 Bedienungsanleitung

Extech Instruments

Extech Instruments GX900 Bedienungsanleitung

Extech Instruments

Extech Instruments 407850 Bedienungsanleitung

Extech Instruments

Extech Instruments 406800 Bedienungsanleitung

Extech Instruments

Extech Instruments SDL710 Bedienungsanleitung

Extech Instruments

Extech Instruments MA610 Bedienungsanleitung

Extech Instruments

Extech Instruments 407227 Bedienungsanleitung

Extech Instruments

Extech Instruments 461893 Bedienungsanleitung

Extech Instruments

Extech Instruments HD600 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung