FeiYu Tech VLOG Pocket Installationsanleitung
FAQ • VLOG Pocket
TABLE OF CONTENTS
SET-UP & OPERATION
1) In what instances will the gimbal shut down automatically?
2) What are the dierent ways of connecting my smartphone to the gimbal?
3) How do I switch to landscape mode?
4) How do I switch to photo/video mode when connected to Wi-Fi?
TROUBLESHOOTING
1) The gimbal does not turn on after interrupting the firmware upgrade.
How do I fix this?
2) Why does the pan axis start vibrating when I manually lock the tilt axis?
3) My gimbal spins out of control when I turn it on. What should I do?
4) I cannot find any stabilizer. How do I fix it?
5) What do I do when the gimbal doesn’t stay in the horizontal position?
6) Face tracking is not working. What do I do?
7) Why is the HDR photo function not working?
FAQ • VLOG Pocket
SET UP & OPERATION
1) In what instances will the gimbal shut down automatically?
Low battery: When the battery is running low, red indicator lights will flash
three times (repeatedly)
Protection status:
- The gimbal’s handle rotates rapidly: Hold the gimbal or place it on a desk
with a tripod.
- The temperature of the motors is too high (55°): Usually, it is caused by the
smartphone not being balanced properly.
- The motors are excessively loaded: Before turning on the gimbal, please
ensure your smartphone is balanced properly, the logo on the phone adapter
is facing up, and the clamps on the three axes are unlocked.
2) What are the dierent ways of connecting my smartphone to the gimbal?
Pairing the Bluetooth directly: in your smartphone’s Bluetooth setting: You
could take pictures and record videos on your own smartphone with the
Bluetooth shutter.
Connecting the Bluetooth via the App: You could get more settings, such as
tracking function, gimbal setting and so on.
3) How do I switch to landscape mode?
Hold the gimbal, press and hold the trigger button, turn the handle to the
inverted holding position and release the trigger button after adjusting the
phone to the Appropriate angle. When in the upside-down position, the
gimbal allows you to take pictures in any angle.
Tips: Double tapping the trigger button is recommended before operating the
landscape mode.
Caution: Please do not rotate the gimbal to the upside-down position without
following the aforementioned steps
4) How do I switch to photo/video mode when connected to Wi-Fi?
Double-tap the shutter button.
FAQ • VLOG Pocket
TROUBLESHOOTING
1) The gimbal does not turn on after interrupting the firmware upgrade.
How do I fix this?
Please follow the steps outlined below:
a) Press and hold the function button, trigger button and setting button
simultaneously. Blue indicator lights will start flashing
b) Go to the App and restart the firmware upgrade
2) Why does the pan axis start vibrating when I manually lock the tilt axis?
The preferred angle to manually lock the tilt axis is +/-40°. If the angle is more
than +/-40°, that will cause the pan axis to vibrate.
3) My gimbal spins out of control when I turn it on. What should I do?
- Make sure the clamps of the 3-axis are unlocked;
- Make sure the “VLOG pocket” logo on the phone adapter is facing up
4) I cannot find any stabilizer. How do I fix it?
1 Please ensure the gimbal is not connected to another device via Bluetooth.
If it is the case, a green indicator light will flash every 5 seconds.
2 In the event the gimbal was connected to another device, turn o the
Bluetooth connection on the other device and check if a Bluetooth
connection was established between your smartphone and the gimbal.
If yes, please forget or cancel pairing. Then, turn the Bluetooth o and on
and run the App to begin the Bluetooth pairing process.
3 Go away (about 10 meters) and connect again.
5) What do I do when the gimbal doesn’t stay in the horizontal position?
Please try to initialize the gimbal first.
- When the gimbal is on, tap the function button 5 times. The motors will stop
working and the indicator light will turn solid blue.
- Place the gimbal on a flat, horizontal surface. The gimbal will automatically
reset after a few seconds of detecting no movement. Thereafter, the blue
indicator light will flash three times to indicate the end of the reset process.
- After the initialization is successful, click the function button to turn on the
gimbal
6) Face tracking is not working. What do I do?
Please make sure your smartphone and the gimbal are connected via
Bluetooth, then turn o Portrait Orientation Lock on your iPhone.
FAQ • VLOG Pocket
7) Why is the HDR photo function not working?
This function is only supported on iPhone 7 and above
If you have an iPhone 7 or above, you will need to set up the resolution to
30fps.
Inhaltsverzeichnis
Andere FeiYu Tech Kamerazubehör Handbücher
FeiYu Tech
FeiYu Tech SCORT-C F2C Bedienungsanleitung
FeiYu Tech
FeiYu Tech G4S Bedienungsanleitung
FeiYu Tech
FeiYu Tech VIMBLE 3 Bedienungsanleitung
FeiYu Tech
FeiYu Tech SCORP-C Bedienungsanleitung
FeiYu Tech
FeiYu Tech G6 Plus Installationsanleitung
FeiYu Tech
FeiYu Tech Cambox Bedienungsanleitung
FeiYu Tech
FeiYu Tech MiNi 3D Bedienungsanleitung
FeiYu Tech
FeiYu Tech SCORP Mini Bedienungsanleitung
FeiYu Tech
FeiYu Tech Double-hand foldable set Bedienungsanleitung
FeiYu Tech
FeiYu Tech G4 Plus Bedienungsanleitung
FeiYu Tech
FeiYu Tech Vimble 2A Installationsanleitung
FeiYu Tech
FeiYu Tech AK2000S Bedienungsanleitung
FeiYu Tech
FeiYu Tech G3 Steadycam Bedienungsanleitung
FeiYu Tech
FeiYu Tech VIMBLE3 Bedienungsanleitung
FeiYu Tech
FeiYu Tech SCORP 2 Bedienungsanleitung
FeiYu Tech
FeiYu Tech G5 Bedienungsanleitung
FeiYu Tech
FeiYu Tech WCP2S Bedienungsanleitung
FeiYu Tech
FeiYu Tech AK4500 Bedienungsanleitung
FeiYu Tech
FeiYu Tech G360 Kurzanleitung
FeiYu Tech
FeiYu Tech G5 Bedienungsanleitung
