Festo MPA-C Series Bedienungsanleitung

Pneumatics

description

Valve terminal with

MPA-C pneumatics

Type:

MPAC-VI

8023740

1407NH

[8023747]

Valve terminal

MPA-C

2 Festo – GDCV-MPAC-EN – 1407NH –

Translation of the original instructions

GDCV-MPAC-EN

IO-Link

is a registered trademark of its respective trademark holder in certain countries.

Identification of hazards and instructions on how to prevent them:

Warning

Hazards that can cause death or serious injuries.

Caution

Hazards that can cause minor injuries or serious material damage.

Other symbols:

Note

Material damage or loss of function.

Recommendations, tips, references to other documentation.

Essential or useful accessories.

Information on environmentally sound usage.

Text designations:

• Activities that may be carried out in any order.

1. Activities that should be carried out in the order stated.

– General lists.

MPA-C

Festo – GDCV-MPAC-EN – 1407NH – English 3

Table of Contents – MPA-C

1 Safety and requirements for product use 8......................................

1.1 Safety 8..................................................................

1.1.1 General safety information 8..........................................

1.1.2 Intended use 8.....................................................

1.2 Requirements for product use 9...............................................

1.2.1 Technical prerequisites 9............................................

1.2.2 Qualification of specialized personnel 9.................................

1.2.3 Range of application and certifications 9................................

2Overview 10................................................................

2.1 Valve terminal MPA-C 10......................................................

2.1.1 Purpose 10........................................................

2.1.2 Performance characteristics 10........................................

2.1.3 Equipment levels 11.................................................

2.1.4 Size of the valves 11.................................................

2.2 Valve terminal design 12......................................................

2.3 Electrical connection 13.......................................................

2.3.1 Multi-pin plug connection 13..........................................

2.3.2 I-Port interface/IO-Link 13............................................

2.4 Description of components 14..................................................

2.4.1 Manifold sub-bases and electronics modules 14...........................

2.4.2 Valves. 15.........................................................

2.4.3 Cover of the manifold sub-base 16......................................

2.4.4 Pneumatic supply 18.................................................

2.4.5 Pilot air supply 18...................................................

2.4.6 Exhaust air 19......................................................

2.4.7 Pressure compensation 19............................................

2.4.8 Pressure zone separation 20...........................................

2.4.9 Electrical connection 21..............................................

2.4.10 Display and control elements 23........................................

2.4.11 Switching status indication of the valves 24...............................

2.4.12 Manual override (MO) 24.............................................

MPA-C

4 Festo – GDCV-MPAC-EN – 1407NH – English

3 Mounting and installation 25..................................................

3.1 Mounting / dismantling 25.....................................................

3.2 Compressed air preparation 26.................................................

3.2.1 Operation with unlubricated compressed air 26...........................

3.2.2 Operation with lubricated compressed air 26.............................

3.3 General instructions on installation 28...........................................

3.4 Connecting the valve terminal 29................................................

3.4.1 Pilot control (pilot air supply) 29........................................

3.4.2 MPA-C valve terminal with pressure zone separation 30.....................

3.4.3 Vacuum / low-pressure operation: 32...................................

3.4.4 Connecting the pneumatic lines 33......................................

3.5 Installation of the tubing lines 35...............................................

3.5.1 Connecting 35......................................................

3.5.2 Removing 35.......................................................

3.5.3 Common pneumatic lines 36...........................................

3.6 Connecting the electric cables 37...............................................

3.7 Address assignment 37.......................................................

3.7.1 Addressing example 38...............................................

4 Commissioning 40...........................................................

4.1 Prior to commissioning 40.....................................................

4.1.1 Pressure build-up in the overall supply 40................................

4.2 Testing the valves and the valve/actuator combination 42............................

5 Operation and diagnostics 44..................................................

5.1 Cleaning the valve terminal MPA-C 44............................................

5.2 Diagnostics and fault clearance 46..............................................

5.2.1 Switching status indicator of the solenoid coils 46.........................

5.2.2 Impairments of function 47............................................

5.2.3 Operating statuses of the pneumatic system 48...........................

MPA-C

Festo – GDCV-MPAC-EN – 1407NH – English 5

6 General preventive action 49..................................................

6.1 Servicing the valve terminal MPA-C 49...........................................

6.1.1 Clean or replace silencer 49...........................................

6.1.2 Replace valves or cover plate 50........................................

6.2 Converting the valve terminal MPA-C 53..........................................

6.2.1 Tie rod system 53...................................................

6.2.2 Replacing or extending the manifold sub-base, supply plate

or replacing the right end plate 54......................................

6.2.3 Replacing electronics modules 57......................................

6.2.4 Conversion between internal and external pilot air supply 57.................

6.2.5 Adding pressure zones on the MPA-C valve terminal 58......................

6.2.6 modification of the outlet direction of the electrical connection 60............

A Technical appendix 62........................................................

A.1 Technical data 62............................................................

A.1.1 General 62.........................................................

A.1.2 Operating and environmental conditions 64...............................

A.1.3 Pneumatics 65......................................................

A.1.4 Electrical data 68....................................................

A.1.5 Product key 69......................................................

A.2 Accessories 69..............................................................

B Circuit symbol 70............................................................

B.1 Overview of valves 70........................................................

C Glossary 75................................................................

MPA-C

6 Festo – GDCV-MPAC-EN – 1407NH – English

Notes on this documentation

This documentation serves the purpose of ensuring safe work with the MPA-C valve terminal and con-

tains specific information on mounting, installation, commissioning, cleaning, servicing and modifying

the valve terminal. This description deals only with the pneumatic components.

Service

Please consult your regional Festo contact if you have any technical problems.

MPA-C

Festo – GDCV-MPAC-EN – 1407NH – English 7

Documentation

Information on the electrical/electronic components can be found in the following documentation:

Design of the valve terminal Documentation

Valve terminal with

– multi-pin plug connection

– I-Port interface/IO-Link

Relevant product enclosures

Tab. 1 Documentation for the valve terminal

1 Safety and requirements for product use

8 Festo – GDCV-MPAC-EN – 1407NH – English

1 Safety and requirements for product use

1.1 Safety

1.1.1 General safety information

Note

Damage to the product from incorrect handling.

• Switch off the supply voltage before mounting and installation work. Switch on

supply voltage only when mounting and installation work are completely finished.

• Never unplug or plug in a product when powered!

• Observe the handling specifications for electrostatically sensitive devices.

1.1.2 Intended use

The valve terminal MPA-C is intended for installation in machines or automated systems and may be

used only as follows:

– in excellent technical condition,

– in original status without unauthorised modifications; only the conversions or modifications

described in the documentation supplied with the product are permitted,

– within the limits of the product defined by the Technical data (Appendix A.1),

– in an industrial environment.

If used together with additional commercially available components, such as actuators, the specified

limits for pressures, temperatures, electrical data, torques etc. must be observed.

Note

In the event of damage caused by unauthorised manipulation or other than intended

use, the guarantee is invalidated and the manufacturer is not liable for damages.

1 Safety and requirements for product use

Festo – GDCV-MPAC-EN – 1407NH – English 9

1.2 Requirements for product use

• Make this documentation available to the design engineer, installer and personnel responsible for

commissioning the machine or system in which this product is used.

• Make sure that the specifications of the documentation are always complied with. Also consider the

documentation for the other components and modules.

• Take into consideration the legal regulations applicable for the destination, as well as:

– regulations and standards,

– regulations of the testing organizations and insurers,

– national specifications.

1.2.1 Technical prerequisites

General notes for the correct and safe use of the product, which must be observed at all times:

• Comply with the connection and environmental conditions of the product (Appendix A.1) and all

connected components specified in the technical data.

Only compliance with the limit values or load limits permits operation of the product in accordance

with the relevant safety regulations.

• Observe the notes and warnings in this documentation.

1.2.2 Qualification of specialized personnel

The product may be placed in operation only by a qualified electrotechnician, who is familiar with

– the installation and operation of electrical control systems,

– the applicable regulations for operating safety-engineering systems,

– the applicable regulations for accident protection and work safety, and

– the documentation for the product.

1.2.3 Range of application and certifications

Standards and test values, which the product complies with and fulfils, can be found in the “Technical

data” section (Appendix A.1). The product-relevant EU directives can be found in the declaration of

conformity.

Certificates and the declaration of conformity for this product www.festo.com/sp.

The product fulfils the requirements of EU directives and is equipped with the CE marking.

2Overview

10 Festo – GDCV-MPAC-EN – 1407NH – English

2Overview

2.1 Valve terminal MPA-C

Festo assists you in solving your automation tasks at machine level with the valve terminal MPA-C. The

modular structure of the valve terminal enables you to match it optimally in your machine or system.

The valve terminal provides the following connections:

– common ducts for supply and exhaust air

– electrical signals from all solenoid coils

The working ports (2) and (4) are provided for each valve position on the individual pneumatic manifold

sub-bases. The valves are supplied with compressed air (operating pressure and pilot pressure) via the

common channels and connections in the basic components. The exhaust air (from the valves and the

pilot exhaust air) is also exhausted via these common channels. Further components for compressed

air supply are also available, e.g. in order to supply pressure zones.

The valve terminal is equipped with current reduction. The nominal current of the solenoid coils is then

reduced after the high-current phase (switching operation). The current reduction offers the following

advantages:

– The valve terminal has a lower energy consumption,

– The power supply unit for the power supply to the valve terminal can be designed more economic-

ally, depending on the application

– The solenoid coils have lower power loss and produce less waste heat.

2.1.1 Purpose

The valve terminal from Festo is especially appropriate for the food and packaging industry. It fulfils the

requirements for the splash zone in accordance with DIN EN 1672-2:2009-07.

2.1.2 Performance characteristics

The valve terminal has the following performance characteristics:

– All external materials are safe for use with food

– Easy to clean (larger space between the valves, no sharp edges, no narrow radii, no dirty corners)

– Increased resistance to corrosion (KBK 4)

– Resistance to acid and alkaline cleaning agents

– Fulfills degree of protection IP69K

– Ease of maintenance

– Pre-mounted valves

– Central air supply

– Centrally ducted exhaust air

–Testedunit

– Modular tie rod system

– Subsequent conversion possible.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Festo Touch-Terminal Handbücher

Festo

Festo FB13 Bedienungsanleitung

Festo

Festo CPX-FB32 Bedienungsanleitung

Festo

Festo CPV..-DI01 series Bedienungsanleitung

Festo

Festo CPX Benutzerhandbuch

Festo

Festo VTSA-ASI 4E4A-Z Series Stücklistenhandbuch

Festo

Festo VTSA-ASI 4E4A-Z Series Stücklistenhandbuch

Festo

Festo VTEM Bedienungsanleitung

Festo

Festo CPV-GE-DN3-8 Series Bedienungsanleitung

Festo

Festo FB13 Bedienungsanleitung

Festo

Festo CPV...-GE-CO3-8 series Bedienungsanleitung

Festo

Festo Compact Performance CPV GE-IP-8 Series Stücklistenhandbuch

Festo

Festo CPX Bedienungsanleitung

Festo

Festo VTOP Bedienungsanleitung

Festo

Festo CPV GEASI-4E4A Series Stücklistenhandbuch

Festo

Festo VIFB8-03 Series Stücklistenhandbuch

Festo

Festo CPV E ASI-4E4A Series Stücklistenhandbuch

Festo

Festo MPA1-MP Series Bedienungsanleitung

Festo

Festo CPV GE-IL Series Bedienungs- und Montageanleitung

Festo

Festo MPA-F Series Bedienungs- und Montageanleitung

Festo

Festo CPX Series Bedienungsanleitung

Festo

Festo CPV-GE-CC-8 Series Stücklistenhandbuch

Festo

Festo CPX-FB13 Bedienungsanleitung

Festo

Festo VTEM Bedienungs- und Montageanleitung

Festo

Festo CPX-FB6 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung