-07- -08-
Display Operation Instruction&Button Function Description
1. Press the key button at the bottom of the LCD display to switch and show exercise time,
speed, distance, calories, total distance，rotating speed and other parameters.
2. If stop exercising for more than 4 minutes, the display will enter sleep mode and the LCD
display will automatically turn off.
3.Press the Key button or step on the pedal for one round to reactivate the LCD display.
LCD Display
Key Button
Scan
Time
Speed
Distance
Calories
Total Distance
Rotating Speed
Two Double A
Battery 1.5V
Instruction 1 Instruction 2
Governor Handwheel
Resistance Adjustment Method：
Rotate the governor handwheel towards
the "+" direction to increase resistance,
towards the "-" direction to decrease
the resistance force.
Cushion
Plastic
Handle
Plastic
Handle
How to adjust the height of the cushion: Slightly
raise the buttocks, pull up the plastic handle
(as shown in figure 1) to raise the cushion,
release the handle to lock the cushion at
current position; Pull up the plastic handle,
lower the height of the cushion by the weight
of the human body, release the handle to lock
the cushion at current position. According to
the above method, the cushion can be adjusted
to the most comfortable position.
Instruction 3
Instruction 4
Unfolding function of rear feet: Tilt the product appropriately, and use an Allen key ① to
push the limit pin into the hole (as shown in Figure ②), at the same time, fold the rear feet
completely in the direction of the arrow as shown.
Rear Feet
Figure 2
Limit Round Pin
Note:this method is only recommended for return or exchange before entering the box.
Adjust cushion position: To adjust the installation position of the seat cushion, use an
Allen key ① to loosen the 4 screws under the seat cushion (B) for a few turns. (Refer to
Figure ③) ; after the seat cushion is adjusted to the proper position, tighten the 4 screws
with an Allen key① to fix the cushion.
Figure 3
4 Screws Cushion
Figure 1
