FlightScope X3 Bedienungsanleitung
E19-D2154-4
NOTICES
The following notices and general precautions must be observed during the opera-
tion, service and repair of this equipment. Failure to comply with these precautions or
with warnings elsewhere in the manual violates standards of the design, manufacture
and intended use of the equipment. FlightScope accepts no liability for failure to com-
ply with these notices.
Operation of the device in any country may require approval in accordance with local
telecommunications and safety regulations.
The equipment has been designed for sheltered or clear weather use.
Copyright: ©2017 FlightScope(Pty)Ltd. All rights reserved.
The information presented in this document may not be copied or reproduced in any
form whatsoever without prior written consent of FlightScope®. FlightScope®
reserves all the rights to information published in this document. Titles of information
and any copies thereof shall remain the property of FlightScope®.
FlightScope® is a registered trademark.
Patents and patents pending.
Japanese caution: for Indoors use only.
++++++本機器の使用に係る注意事項++++++ 本機器の使用周波数帯（10.5GHz
を超え10.55GHz 以下の周波数）では、
免許を受けて屋外で利用されている無線局があります。これらとの干渉が懸
念される為、本機器の使用は、屋内での使用、即ち住宅、マンション、ビル
等の建築物内のみと限定されています。 万一、10.5GHz
帯の周波数を使用する移動体検知センサーを屋外で使用し
た場合には、その使用に支障が生じるばかりでなく、電波法令に違反し罰則
の適用を受けることとなりますので、十分注意してください。
FCC Statement
Changes or modifications not expressly approved by FlightScope (Pty) Ltd could void
the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in an office or residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to other electronic equipment,
which can be determined by turning this equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment causing and experiencing the inter-
ference. Install a radio frequency shield between the equipment causing and experi-
encing the interference. Consult your dealer for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Déclaration IC
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This guide will help you set up and use the
FlightScope X3
FlightScope X3 is battery operated, and
connects by Ethernet or USB cable to your
computer device.
Battery Safety and Care
Ethernet Port
USB Ports
Normal Play Modes
Set units, distances, height & altitude
Units
Sensor to Tee Distance
Tee Surface Height
Altitude
Basic care
Damage
Cleaning
Storage & Transportation
Congratulations on purchasing the FlightScope X3, featuring brand
new Fusion Tracking technology.
The X3 can be used for equipment or player testing, from tee drives
to chipping and putting, and operates indoors and outdoors.
Use it to train, teach, test, fit and choose clubs and balls. Typical
applications include:
Teaching
Club fitting
Practice and self-assessment
Equipment testing
Equipment retail
Golf game simulation
FlightScope will fully support you in your use and enjoyment of the
system. FlightScope’s ongoing R&D commitment also means that
new features and levels of performance will be readily available to
you when new developments are made. We look forward to being
your technology partner as you and your customers Master your
Passion®
Inhaltsverzeichnis
Andere FlightScope Fitnessgeräte Handbücher
