FLORABEST FHE 710 A1 Betriebsanleitung

IAN 93501

ElEctric PrunEr FHE 710 A1

ElEctric PrunEr

Translation of original operation manual

ElEktrycznA okrzEsywArkA

Tłumaczenie oryginalnej instrukcji obsługi

ElEktro-HocHEntAstEr

Originalbetriebsanleitung

ElEktrický odvEtvovAč

Preklad originálneho návodu na obsluhu

tElEskoPická PilA

Překlad originálního provozního návodu

ElEktrični rEzAlnik vEj

Prevod originalnega navodila za uporabo

93501_flo_Hochentaster_cover_PL_SI_CZ_SK.indd 2 18.09.13 08:55

GB Translation of original operation manual Page 4

PL Tłumaczenie oryginalnej instrukcji obsługi Strona 24

SI Prevod originalnega navodila za uporabo Stran 46

CZ Překlad originálního provozního návodu Strana 66

SK Preklad originálneho návodu na obsluhu Strana 86

DE / AT / CH Originalbetriebsanleitung Seite 106

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the

device.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi

funkcjami urządzenia.

Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

93501_flo_Hochentaster_cover_PL_SI_CZ_SK.indd 3 18.09.13 08:55

15a

2223

17a

17b

14 18

Contents

Introduction .................................5

Intended purpose.........................5

General description......................5

Enclosed parts................................5

Overview ......................................6

Technical Data..............................6

Notes on safety............................7

Symbols used in the instructions........7

Symbols used on the device.............7

General Safety Directions for Power

Tools ............................................8

Chain saw safety warnings............10

Causes and operator prevention of

kickback......................................11

Further safety directions.................12

Fitting ........................................13

Assembling the Round Handle........13

Attaching/setting the shoulder

strap...........................................14

Installing the sawing chain and

blade .........................................14

Tensioning the saw chain...............14

Chain lubrication..........................15

Operation startup ......................15

Before starting, check....................15

Switching On and Off...................16

Checking the oil automation ..........16

Adjusting the Telescopic Handle .....16

Adjusting the handle.....................16

Transport ..................................16

Sawing techniques.....................17

Sawing Off Small Branches ...........17

Sawing Off Larger Branches ..........17

Sawing Off Parts ..........................17

Working Safely..........................18

Cleaning/Maintenance/Storage..18

Cleaning .....................................18

Resharpening of the saw chain.......18

Storage.......................................18

Waste disposal and environ-

mental protection.......................19

Spare parts/Accessories.............19

Maintenance Interval Table ........20

Trouble shooting ........................21

Guarantee .................................22

Repair Service............................23

Service-Center............................23

Importer ....................................23

Translation of the original EC

declaration of conformity.........128

Exploded Drawing ...................131

Introduction

Congratulations on the purchase of your

new device. With it, you have chosen a

high quality product.

During production, this equipment has

been checked for quality and subjected

to a nal inspection. The functionality of

your equipment is therefore guaranteed. It

cannot be ruled out that residual quantities

of water or lubricants will remain on or in

the equipment/hose lines in isolated cases.

This is not a fault or defect and it repre-

sents no cause for concern.

The operating instructions constitute

part of this product. They contain

important information on safety, use

and disposal.

Before using the product, familiarise

yourself with all of the operating

and safety instructions. Use the

product only as described and for

the applications specied.

Keep this manual safely and in the

event that the product is passed on,

hand over all documents to the third

party.

Intended purpose

The electric pruner is intended for pruning

work on tree branches. It is not designed

for extensive sawing work, tree felling and

cutting materials such as masonry, plastic

or food.

The device is designed for use by adults.

Young people over 16 years old may use

the electric pruner under supervision only.

The equipment is not intended for use by

people of restricted physical, sensory or

mental ability. This is also fundamentally

applicable for children.

The electric pruner is designed for employ-

ment in the do-it-yourselfer sector.

National regulations may restrict the use of

the equipment.

The manufacturer is not liable for dam-

ages, which were caused through use in

applications for which it was not designed,

or incorrect operation.

General description

The illustration of the principal

functioning parts can be found

on the front and back foldout

pages.

Enclosed parts

Carefully unpack the appliance and check

that it is complete. Dispose of the packag-

ing material correctly.

- Electric pruner

- Chain bar

- Saw chain

- Sprocket chain wheel covering

- Blade cover

- Shoulder strap

- Round handle with brake arm

- 60 ml Bio chain oil

- Allen Key

- Instruction Manual

Overview

Device

1 Saw chain

2 Chain bar

3 Bumber

4 Blade xing screw

5 Chain tensioner

6 Sprocket chain wheel covering

7 Brake arm

8 Pivotal centre to adjust the handle

9 Adjustable handle

10 On/off switch

11 Strain relief

12 Mains cable

13 Safety lock (not visible)

14 Shoulder strap

15 Eye (for shoulder strap)

15a Hex socket head screw for ad-

justing the carrying eye

16 Round handle

17 Quick release (for telescopic

handle)

17a Lever

17b Allen screw

Accessories Enclosed

14 Shoulder strap

18 Blade cover

19 60 ml Bio chain oil

20 Allen Key

21 Blade guide

22 Oil outlet channel

23 Chain wheel

24 Thread

25 Hole in the chain bar

26 Chain tensioning pin

27 Oil level inspection window on

oil tank

28 Oil ller cap

Technical Data

Electric pruner ........................ FHE 710 A1

Rated input voltage .......... 230 V~, 50 Hz

Input power.................................710 W

Max. spindle rotation speed.....6000 min-1

Safety class ...................................... II

Protection category ..........................IP20

Chain speed.....................max. 11.2 m/s

Weight

without guide rail and

chain............................approx. 3.9 kg

with guide rail and chain approx. 4.4 kg

Oiltank .......................................70 cm3

Chain bar .......10“ Oregon Double Guard

100SDEA041 (518693)

Chain .........................Oregon 91 P040X

Chain pitch............................3/8“ (9.5 mm)

Number of chain drive links .................... 40

Chain width ............................... 1.3 mm

Teeth of the sprocket chain wheel ........... 6

Sawing length (max.)......... approx. 26 cm

Acoustic pressure level

(LpA).................86 dB(A);KpA=3.0 dB(A)

Sound power level (LWA)

guaranteed ......................... 104 dB(A)

measured ..101.7 dB(A); KwA=2.0 dB(A)

Vibration (an) .........3.0 m/s2; K=1.5 m/s2

Noise and vibration values were deter-

mined according to the standards and

stipulations mentioned in the declaration of

conformity.

Technical and optical changes can be

carried out in the course of further devel-

opment without notice. All dimensions, ref-

erences and information of this instruction

manual are therefore without guarantee.

Legal claims, which are made on the basis

of the instruction manual, cannot thus be

considered as valid.

The stated vibration emission value was

measured in accordance with a standard

testing procedure and may be used to com-

pare one power tool to another. The stated

vibration emission value may also be used

for a preliminary exposure assessment.

Warning: The vibration emission

value may differ during actual use

of the power tool from the stated

value depending on the manner in

which the power tool is used.

Safety precautions aimed at pro-

tecting the user should be based on

estimated exposure under actual

usage conditions (all parts of the

operating cycle are to be consid-

ered, including, for example, times

during which the power tool is

turned off and times when the tool

is turned on but is running idle).

Notes on safety

This section deals with the basic safety

regulations while working with the electric

pruner.

An electric pruner is a dangerous

device, which can cause serious

or even fatal injuries with incorrect

or careless use. Thus, for your own

safety and the safety of others, you

should always take note of the in-

structions on safety and, in case of

difculties, consult a specialist for

advice.

Symbols used in the

instructions

Hazard symbols with in-

formation on prevention of

personal injury and property

damage.

Precaution symbol (explanation of

precaution instead of exclamation

mark) with information on preven-

tion of harm / damage.

Notice symbol with information on

how to handle the device properly.

Symbols used on the device

Make yourself familiar with all

control elements before any work.

Practice handling the saw and have

explained the functions, operating

methods and sawing techniques by

a practiced user or specialist.

Read and take note of the operat-

ing manual belonging to the ma-

chine!

Do not expose the machine to the

rain. Do not allow the equipment

to become damp or operate it in a

damp environment.

Danger due to materials blown out

of machine!

Keep the equipment away from

nearby people.

Caution! Remove the plug immedi-

ately from the plug socket in case

of damage or cutting through of the

mains cable.

Wear personal protective equip-

ment. Basically, wear protective

goggles or, even better, face protec-

tion, safety helmet and ear protec-

tion.

Wear cut-protection gloves.

Wear cut-protection safety boots

with anti-slip soles.

10 m

Danger of death by electrocution!

Keep at least 10m away from pow-

er lines.

Information of the guaranteed

acoustic power level LWA in dB.

Safety class II

Machines do not belong with do-

mestic waste.

A full tank will last for approx.

10minutes of continuous operation.

General Safety Directions for

Power Tools

Before you do any work with the

electric pruner, make yourself famil-

iar with all operating parts. Practise

using the saw (sawing logs on a

sawhorse) and get an experienced

user or a specialist to explain to

you the function of the saw, the

way of working, the techniques of

sawing and the personal protection

equipment.

RESIDUAL RISKS

Even if properly operating and handling this

electric tool, some residual risks will remain.

Due to its construction and build, this elec-

tric tool may present the following hazards:

a) Cuts

b) Ear damage if working without ear pro-

tection.

c) Damage to your health caused by

swinging your hands and arms when

operating the appliance for longer pe-

riods of time or if the unit is not held or

maintained properly.

WARNING! Read all safety di-

rections and instructions. Omis-

sions in the compliance with safety

directions and instructions can cause

electrical shock, re and/or severe

injuries.

Retain all safety directions and in-

structions for future use.

The term „power tool“ in the warnings re-

fers to your mains-operated (corded) power

tool or battery-operated (cordless) power

tool.

Work area safety

• Keep work area clean and well

lit. Cluttered or dark areas invite acci-

dents.

• Do not operate power tools in

explosive atmospheres, such as

in the presence of ammable

Iiquids, gases or dust. Power tools

create sparks which may ignite the dust

or fumes.

• Keep children and bystanders

away while operating a power

tool. Distractions can cause you to lose

control.

Electrical safety

• Power tool plugs must match

the outlet. Never modify the

plug in any way. Do not use

any adapter plugs with earthed

(grounded) power tools. Unmod-

ied plugs and matching outlets will

reduce risk of electric shock

• Avoid body contact with

earthed or grounded surfaces,

such as pipes, radiators, rang-

es and refrigerators. There is an

increased risk of electric shock if your

body is earthed or grounded.

• Do not expose power tools to

rain or wet conditions. Water

entering a power tool will increase the

risk of electric shock.

• Do not abuse the cord. Never

use the cord for carrying, pulling

or unplugging the power tool.

Keep cord away from heat, oil,

sharp edges or moving parts.

Damaged or entangled cords increase

the risk of electric shock.

• When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a

cord suitable for outdoor use reduces

the risk of electric shock.

• If operating a power tool in a

damp location is unavoidable,

use a residual current device

(RCD) protected supply. Use of an

RCD reduces the risk of electric shock.

• Connect the appliance to a power

socket with a residual current circuit

breaker of rated residual current no

more than 30 mA.

• If the replacement of the supply cord is

necessary, this has to be done by the

manufacturer or his agent in order to

avoid a safety hazard.

Personal safety

• Stay alert, watch what you are

doing and use common sense

when operating a power tool.

Do not use a power tool while

you are tired or under the inu-

ence of drugs, alcohol or medi-

cation. A moment of inattention while

operating power tools may result in

serious personal injury.

• Use personal protective equip-

ment. Always wear eye pro-

tection. Protective equipment such

as dust mask, non-skid safety shoes,

hard hat, or hearing protection used

for appropriate conditions will reduce

personal injuries.

• Prevent unintentional start-

ing. Ensure the switch is in the

off-position before connecting

to power source and/or battery

pack, picking up or carrying the

tool. Carrying power tools with your

nger on the switch or energising pow-

er tools that have the switch on invites

accidents.

• Remove any adjusting key or

wrench before turning the pow-

er tool on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.

• Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the pow-

er tool in unexpected situations.

• Dress properly. Do not wear

loose clothing or jewellery.

Keep your hair, clothing and

gloves away from moving

parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

• If devices are provided for the

connection of dust extraction

and collection facilities, ensure

these are connected and prop-

erly used. Use of dust collection can

reduce dust-related hazards.

Power tool use and care

• Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

• Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

• Disconnect the plug from the

power source and/or the bat-

tery pack from the power tool

before making any adjust

-ments, changing accessories, or

storing power tools. Such preven-

tive safety measures reduce the risk of

starting the power tool accidentaIly.

• Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

• Maintain power tools. Check

for misalignment or binding

of moving parts, breakage of

parts and any other condition

that may affect the power tool’s

operation. If damaged, have

the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working con-

ditions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

• Carefully inspect the area to be cut

and remove all wires or other foreign

bodies.

Service

• Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

Chain saw safety warnings

• Keep all parts of the body

away from the saw chain when

the chain saw is operating. Be-

fore you start the chain saw,

make sure the saw chain is not

contacting anything. A moment of

inattention while operating chain saws

may cause entanglement of your cloth-

ing or body with the saw chain.

• Always hold the chain saw with

your right hand on the rear

handle and your left hand on

the front handle. Holding the chain

saw with a reversed hand congura-

tion increases the risk of personal inju-

ry and should never be done.

• Wear safety glasses and ear

protection. Other protective

equipment for the head, hands,

legs and feet is compulsory. Ad-

equate protective clothing will reduce

Andere Handbücher für FHE 710 A1

Inhaltsverzeichnis

Sprachen:

Andere FLORABEST Rasen- und Gartengeräte Handbücher

FLORABEST

FLORABEST FLV 1200 A1 Betriebsanleitung

FLORABEST

FLORABEST FLV 1300 A1 Kurzanleitung

FLORABEST

FLORABEST 271146 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST FLV 1200 A1 Betriebsanleitung

FLORABEST

FLORABEST HG00363 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST Coil Montage- und Bedienungsanleitung

FLORABEST

FLORABEST FBC 7 A1 Bedienungsanleitung

FLORABEST

FLORABEST GB-2784 Bedienungsanleitung

FLORABEST

FLORABEST FGB 20 A1 Bedienungsanleitung

FLORABEST

FLORABEST FRWS 9 A1 Bedienungsanleitung

FLORABEST

FLORABEST FHE 710 A1 Betriebsanleitung

FLORABEST

FLORABEST 291857 Bedienungsanleitung

FLORABEST

FLORABEST 282465 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST 278082 Bedienungsanleitung

FLORABEST

FLORABEST Z30744A Bedienungsanleitung

FLORABEST

FLORABEST HG04678 Bedienungsanleitung

FLORABEST

FLORABEST FSA 25 A Bedienungsanleitung

FLORABEST

FLORABEST BT-7120 Bedienungsanleitung

FLORABEST

FLORABEST FHE 550 B2 Betriebsanleitung

FLORABEST

FLORABEST 315958-1904 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST 279218 Bedienungsanleitung

FLORABEST

FLORABEST 296683 Bedienungsanleitung

FLORABEST

FLORABEST 282463 Bedienungsanleitung

FLORABEST

FLORABEST fhe 550 a1 Betriebsanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung