FLORABEST FLV 1200 A1 Betriebsanleitung

IAN 93500

ELECTRIC SCARIFIER/AERATOR FLV 1200 A1

ELEKTRO-VERTIKUTIERER/RASENLÜFTER

Originalbetriebsanleitung

ELECTRIC SCARIFIER / AERATOR

Translation of original operation manual

LEKTRYCZNY WERTYKULATOR/AERATOR

Tłumaczenie oryginalnej instrukcji obsługi

ELEKTRICKÝ VERTIKUTÁTOR A

PROVZDUŠŇOVAČ

Překlad originálního provozního návodu

ELEKTRICKÝ VERTIKUTÁTOR/

PREVZDUŠŇOVAČ TRÁVNIKA

Preklad originá lneho návodu na obsluhu

ELEKTRIČNI RAHLJALNIK/PREZRAČEVALNIK TRATE

Prevod originalnega navodila za uporabo

ELEKTROMOS TALAJLAZÍTÓ/GYEPSZELLŐZTETŐ

Az originál használati utasítás fordítása

93500_flo_Elektro-Vertikutierer_cover_PL_HU_SI_CZ_SK.indd 2 22.10.13 11:38

GB Translation of original operation manual Page

PL Tłumaczenie oryginalnej instrukcji obsługi Strona

HU Az originál használati utasítás fordítása Oldal

SI Prevod originalnega navodila za uporabo Stran

CZ Překlad originálního provozního návodu Strana

SK Preklad originálneho návodu na obsluhu Strana

DE/ AT/ CH Originalbetriebsanleitung Seite

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions

of the device.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z

wszystkimi funkcjami urządzenia.

Olvasás előtt kattintson az ábrát tartalmazó oldalra és végezetül ismerje meg a készülék mindegyik

funkcióját.

Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend

mit allen Funktionen des Gerätes vertraut.

93500_o_Elektro-Vertikutierer_cover_PL_HU_SI_CZ_SK.indd 3 22.10.13 11:38

A1 32

Contents

Introduction .................................4

Intended purpose.........................4

General description......................5

Scope of delivery ...........................5

Overview ......................................5

Functional description .....................5

Technical data..............................5

Safety precautions .......................6

Symbols on the implement ...............6

Symbols used in the manual.............7

General notes on safety ..................7

Assembling instructions..............10

Assembling the handle bar.................. 10

Mounting and emptying the

collection bag................................ 10

Operation ..................................10

Setting the working positions ........... 11

Switching on and off ...................... 11

Working with the implement............ 12

Exchanging the cylinder.................. 12

Cleaning, maintenance, storage . 13

General cleaning and maintenance

work............................................. 13

Storage......................................... 13

Disposal and protection of the

environment ..............................13

Spare parts................................13

Trouble shooting ........................ 14

Guarantee .................................15

Repair Service............................16

Service-Center............................16

Importer ....................................16

Translation of the original

EC declaration of conformity ....101

Exploded Drawing ...................105

This device can be used by child-

ren aged 8 and over and by peo-

ple with reduced physical, sensory

or mental capacities or with a lack

of experience or knowledge, if

they are supervised or have been

instructed regarding safe use of the

device and understand the resul-

ting risks. Children are not

permitted to play with the device.

Cleaning and user maintenance

are not to be undertaken by

children without supervision.

Introduction

Congratulations on the purchase of your

new device. With it, you have chosen a

high quality product.

The operating instructions constitute part of

this product. They contain important infor-

mation on safety, use and disposal.

Before using the product, familiarise your-

self with all of the operating and safety

instructions. Use the product only as de-

scribed and for the applications specied.

Keep this manual safely and in the event

that the product is passed on, hand over

all documents to the third party.

Intended purpose

This implement is used:

- As a lawn aerator and to rake leaves,

moss and weeds out of the lawn and

to collect these leaves and plant resi-

dues.

- As a verticuttor to cultivate the grass

sward and thereby regenerate the

lawn.

Any other use that is not specically ap-

proved in these Instructions can result in

damage to the implement and could be a

serious danger to the user.

The implement must only be operated by

adults. Children and people who are not

familiar with these Instructions must not be

allowed to use this implement. Never oper-

ate this implement while it is raining and in

a wet environment.

The owner or operator is responsible for

accidents or harm to people and their

property.

The manufacturer cannot be held liable for

damage caused by incorrect operation of

the implement or if it is not used in con-

formity with its intended purpose.

General description

Scope of delivery

Carefully unpack the implement and check

that all the subsequently listed parts are

complete:

•Implement case with verticuttor cylinder

and impact protector

•Aerating cylinder

•Upper handle bar complete with start-

ing lever, power plug, unlocking button

and rmly mounted power cable

•Lower bar

•2 centre bars

•Collection bag

•Cable strain relief

•2 cable clamps

•Mounting accessories:

- 2 Philips screws, 4 screws and 4

wing nuts to fasten the bar

- Spanner to change the cylinders

•Instruction Manual

Ensure during assembly that the

power cable is not squeezed and

that it has sufcient play.

Overview

The most important functional

parts are illustrated on the

cover page.

1 Unlocking button

2 Starting lever

3 Upper handle bar

4a+b 4 screws and 4 wing nuts to se-

cure the bar

5 Collection bag

6 Impact protector

7 Lower bar

8 Implement case

9 Setting button

10 2 rear wheels

11 2 wheels

12 Machine cable terminal

13 Spanner

14 Tool holder

15 2 centre bars

16 Machine cable terminal

17 Electric cable

18 Cable strain relief

19 Machine cable

20 Aerator cylinder with sprung

tines

21 Verticutor cylinder with knives

22 Fastening screw

23 Collection bag rods

24 Square receptacle

Functional description

The verticuttor and lawn aerator has two

easily exchangeable work cylinders:

An aerator cylinder made of hard plastic

with vertically rotating sprung tines, and a

verticutor cylinder with vertically mounted

high-grade steel knives.

The implement features a high-quality plas-

tic case with collection bag and a handle

bar with a folding function. Please refer to

the subsequent descriptions for the actual

functions of the individual control elements.

Technical data

Electric Scarier /

Aerator...................... FLV 1200 A1

Motor input .............................. 1200 W

Rated voltage ........... 230-240 V~, 50 Hz

Protection Class ............................... II

Degree of protection.........................IPX4

Rotating speed of the tool (no)

......................................3500 min-1 (r.p.m)

Cylinder width..............................31 cm

Readjustment range for wear...........9 mm

Weight ....................................... 9.9 kg

Acoustic pressure level (LpA)

....................... 84 dB (A); KpA= 3 dB (A)

Measured sound power level (LwA)

.......................99 dB (A); KwA= 4 dB (A)

Guaranteed sound power level

............................................ 103 dB (A)

Vibration (an) ..............4 m/s2; K= 2 m/s2

The noise and vibration values were estab-

lished by the standards and stipulations

listed in the Conformity Declaration.

Technical and visual changes can be com-

pleted in the course of further development

without notication. Consequently, all

dimensions, references and details in these

Operating Instructions are without guar-

antee. Consequently legal claims based

on these Operating Instructions cannot be

asserted.

The stated vibration emission value was

measured in accordance with a standard

testing procedure and may be used to com-

pare one power tool to another.

The stated vibration emission value may

also be used for a preliminary exposure

assessment.

Warning: The vibration emission

value may differ during actual use

of the power tool from the stated

value depending on the manner in

which the power tool is used.

Safety precautions aimed at protect-

ing the user should be based on esti-

mated exposure under actual usage

conditions (all parts of the operating

cycle are to be considered, includ-

ing, for example, times during which

the power tool is turned off and

times when the tool is turned on but

is running idle).

Safety precautions

This section covers the basic safety instruc-

tions when working with this implement.

Symbols on the implement

WARNING!

These Instructions must be read!

Danger of injury due to ung-out

material! Keep bystanders well

away from the implement.

Danger of electric shock

if the power cable is dam-

aged! Always ensure that

the power cable is kept well

away from the implement

and its cutting tools!

Wear eye and ear protection.

CAUTION – Sharp tools: Ensure

that the hands and feet are kept

well away from the cutting tools.

The cutting cylinder continues to

rotate briey after the motor has

been switched off!

Always disconnect the plug from

the mains prior to maintenance

work or if the power cable is

damaged!

Caution with steps! Turn off

the power when the implement

is to be carried across steps!

Noise level ratings LWA in dB(A).

Protection Class

Electrically powered implements

must not be disposed of with the

domestic waste

Remove any soil residue from the springs

of the impact protection cover and/or the

housing to ensure that the cover closes

correctly. When operating without the coll-

ection basket, the impact protection cover

must be completely closed.

Symbols used in the manual

Warning symbols with in-

formation on damage and

injury prevention.

Instruction symbols (the instruction is

explained at the place of the excla-

mation mark) with information on

preventing damage.

Help symbols with information on

improving tool handling.

General notes on safety

This implement can cause serious

injuries if it is not properly used.

Please read these Operating In-

structions carefully and familiarize

yourself with all the control elements

before operating this implement.

Keep these Operating Instructions

in a readily accessible place so that

this information is always at your

disposal.

Operating the implement:

WARNING! The implement can

cause serious injuries.

How to a avoid accidents and inju-

ries:

Preparations:

•Never allow children and people who

are not familiar with these Operating

Instructions to use the implement. Local

regulations may stipulate a minimum

age for operators.

•Never start up the implement while

other people, but especially children

and domestic pets, are in the vicinity.

•Check the area on which the imple-

ment is to be used. Remove all stones,

sticks, wire and other foreign bodies

that could be caught up and ung out.

Never use the implement to level out

uneven patches.

•Always wear appropriate protective

work clothes and rm shoes with non-

slip soles, strong long trousers, ear

defenders and goggles. Never operate

the implement while bare footed or

when wearing open sandals.

•Never operate the implement if it is

damaged, incomplete or has been

modied without the consent of the

manufacturer. Never work with dam-

aged or missing protective devices

(e.g. starting lever, unlocking knob,

impact protector).

•Never disengage protective devices

(e.g. by tying the starting lever).

• Children should be supervised to en-

sure that they do not play with the ap-

pliance.

• Before starting the equipment, ensure

that no objects or branches are pushed

into the blade opening, that the equip-

ment is standing stably and that the

workspace is tidy and not blocked.

Check the condition of your extension

cable and the connecting cable of your

equipment. Use the necessary protec-

tive equipment.

• If your equipment vibrates or emits

unusual noises when switched on,

disconnect the plug from the socket

and check the cutting cylinder. Ensure

that no remains of chopped matter

are blocking the cutting cylinder or

jammed between the blades. If you

nd no problems, return the equipment

to a customer service centre.

• If the blades no longer cut correctly

or if the motor is overloaded, check

all the parts of your equipment and

replace the worn parts. If a more ex-

tensive repair is required, contact a

customer service centre.

Use:

•CAUTION – A very sharp tool. Avoid

cutting your ngers or toes. While

working always keep your feet and

ngers well away from the cutting cyl-

inder and the ejector opening. There is

the danger of serious injury!

•Do not operate the implement while it

is raining, in poor weather conditions

and when the surrounding area and

lawn are wet. Operate the implement

only during daylight hours or with

bright lighting.

•Do not operate the implement if you

are tired or are lacking in concentra-

tion and after having drunk alcohol or

taken medicine. Always take a work

break in due time. Approach the work

with common sense.

•Familiarize yourself with the terrain

and remain focused on the potential

hazards that you could miss on ac-

count of the motor noise.

•Always maintain a secure footing

while working, especially on a sloping

terrain. Always work across slopes -

never up and down! Be particularly

careful when changing the travelling

direction. Do not work on very steep

slopes.

•Always guide the implement at a

walking pace with both hands on the

handle. Be especially careful when you

turn the implement around or draw it

towards you. Danger of stumbling!

•Start or actuate the starting lever with

care and in conformity with the direc-

tions in these Instructions.

•Do not tilt the implement when start-

ing, other than it has to be lifted. In

this case tilt the implement only to the

extent that is absolutely necessary and

always lift the implement on the side

that is opposite to the operator.

•Never operate the implement without

the attached collection bag or impact

protector. Danger of injury! Always

keep well away from the ejector open-

ing.

•Do not operate the implement in the vicin-

ity of inammable liquids or gases as this

could give rise to the danger of a re or

explosion.

Work intervals:

•After the implement has been turned

off, the cutting cylinder will continue to

rotate for a few seconds. Keep hands

and feet well away.

•Only remove plant parts when the

implement is standing completely still.

Ensure that the grass ejector opening is

clean and free.

•Switch off the power when the imple-

ment is to be transported, lifted or tilt-

ed and when traversing other surfaces

than grass.

•Never leave the implement unattended

at the place of work.

•Always switch off the implement and

disconnect the power plug:-

- Whenever you leave the implement

- Before you clean the ejector open-

ing or unblock or unclog the imple-

ment

- When the implement is not being

used

- During all maintenance and clean-

ing work

- When the power cable is damaged

or has become tangled

- When the implement hits an obstruc-

tion during work or when unusual

vibrations arise. Establish the cause

and see if the implement has been

damaged. Do not repair it yourself!

Have the implement repaired by an

authorised workshop!

•Store the implement in a dry place

well out of reach of children.

CAUTION! The following states

how to avoid damage to the imple-

ment and any resulting harm to

people:

Take care of your implement

•Switch off the power when the imple-

ment is to be carried across steps.

•Inspect the implement each time before

it is to be used. Never operate the im-

plement if safety devices (e.g. impact

protector, parts of the cutting facility

or bolts are missing, worn out or dam-

aged. Check especially the power

cable and starting lever for damage.

To avoid imbalance, all tools and bolts

must be exchanged as complete sets.

•Only use spare parts and accessories

that have been supplied or recom-

mended by the manufacturer. The use

of alien parts results in the immediate

loss of all guarantee claims.

•Ensure that all nuts, bolts and screws

are rmly tightened and that the imple-

ment is in a safe working state.

•Never try to repair the implement your-

self, other than you have been trained

accordingly. All work that has not

been listed in these Instructions must

only be carried out by authorised serv-

icing agencies.

•Treat the implement with the greatest

care. Always keep the tool clean for

better and safer work. Follow the main-

tenance instructions.

•Never overload the implement. Always

work within the specied capacity

range. Do not use low-power machines

for heavy-duty work. Do not operate the

implement for purposes for which it is not

intended.

Electrical safety:

CAUTION! The following states how

to avoid accidents and injuries due to

electric shock:

• Before each use, carry out a visual

inspection of the power and extension

cables for signs of damage or ageing.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualied per-

son in order to prevent hazards.

•Keep the power cable well away from

the cutting tools. Should the power

cable become damaged during work,

then instantly disconnect the power

cable from the mains.

DO NOT touch the power cable

before it has been disconnected

from the mains.

•Keep the extension cables away from

the teeth. The teeth may damage the

cables and result in contact with live

parts.

•Check that the mains voltage is the

same as indicated on the rating plate.

•Connect the implement to a power

socket with a residual-current circuit

breaker that has a rated current of not

more than 30 mA.

•Avoid body contact with earthed parts

(e.g. metal fences, metal posts).

•Only use approved extension cables

of the type H05RN-F with a maximum

length of 75 m and which have been

approved for open-air use. The strand-

ed cord diameter of the extension ca-

ble must be at least 2.5 mm2. Always

unreel a cable drum to its full length so

that the entire cable can be checked

for damage.

•Use the envisaged cable suspension

when attaching an extension cable.

•Never pull the cable to disconnect the

plug from the socket. Protect the cable

from heat, oil and sharp edges.

•If the connecting cable is damaged,

rst disconnect the extension cable

from the socket. You can then discon-

nect the connecting cable of the equip-

ment.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualied per-

son in order to prevent hazards.

Assembling

instructions

Prior to any work on the implement

always disconnect the plug from the

power socket!

Assembling the handle bar

1. Insert the lower bar (8) into the

implement case (10) and screw

it on with the two Philips screws

(28).

2. Screw both central bars (15)

with the screws and the wing

nuts (4b) to the lower bar (7).

3. Hang the cable strain relief

(19a) on the upper handle bar

(4).

Attach the clip ring to the tension

adjuster bracket (19b) beneath

the cable tension adjuster (19a)

on the upper handle (4).

4. Screw the upper bar (3) with the

screws and the wing nuts (4a) to

both central bars (15).

5. Fasten the machine cable (19)

with the machine cable terminals

(12/16) to the bar.

Mounting and emptying the

collection bag

WARNING: Never operate

the implement without the

impact protector. Danger of

Injury!

Assembling the collection bag:

The collection bag is delivered in a folded

state and must therefore be assembled be-

fore it is mounted on the implement.

1. Assemble the collection bag rods

(22).

2. Pull the collection bag over the

rods.

3. Put the plastic straps of the col-

lection bag over the collection

bag rods and clip into the plastic

straps.

Mounting the collection

bag on the implement:

4. Lift the impact protector (9).

5. Push the pins (23) on the collec-

tion bag rods into the socket in

the implement case (10).

6. Release the impact protector so

that it holds the collection bag

(6) in its position.

Removing and emptying

the collection bag:

7. Lift the impact protector (9) and

take out the collection bag (6).

Operation

Please observe local regulations

concerning noise protection. It is

quite possible that local rules and

regulations may limit the time of

implement operation or even pro-

hibited its use on certain days (e.g.

Andere Handbücher für FLV 1200 A1

Inhaltsverzeichnis

Sprachen:

Andere FLORABEST Rasen- und Gartengeräte Handbücher

FLORABEST

FLORABEST FHE 710 A1 Betriebsanleitung

FLORABEST

FLORABEST 295697 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST Z31049 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST FLV 1200 A1 Betriebsanleitung

FLORABEST

FLORABEST Coil Montage- und Bedienungsanleitung

FLORABEST

FLORABEST HG00363 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST 295721 Bedienungsanleitung

FLORABEST

FLORABEST BK-4585 Bedienungsanleitung

FLORABEST

FLORABEST 304284 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST 291857 Bedienungsanleitung

FLORABEST

FLORABEST FBC 7 A1 Bedienungsanleitung

FLORABEST

FLORABEST FGA 20 A1 Bedienungsanleitung

FLORABEST

FLORABEST 280351 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST fhe 550 a1 Betriebsanleitung

FLORABEST

FLORABEST 279217 Bedienungsanleitung

FLORABEST

FLORABEST 282463 Bedienungsanleitung

FLORABEST

FLORABEST HG04783A Technische Daten

FLORABEST

FLORABEST FHV 32 B2 Bedienungsanleitung

FLORABEST

FLORABEST 282465 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST 296736 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST HG00491 Montage- und Bedienungsanleitung

FLORABEST

FLORABEST FHE 710 A1 Betriebsanleitung

FLORABEST

FLORABEST GP-1790 Bedienungsanleitung

FLORABEST

FLORABEST 291857 Bedienungsanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung