Formax FD 8500CC Bedienungsanleitung

Paper Shredders

FD 8500CC Cross-Cut

FD 8500SC Strip-Cu

OPERATOR MANUAL

FIRST EDITION

1/2006

Safety Devices and Other Features

Formax

8000 Series Shredders are equipped with various safety features:

Automatic Reverse Rotation

When too much paper is inserted, the cutter stops operating

and automatically rotates in reverse to discharge the jammed

paper. An alarm sounds. Reduce the amount of paper and

restart the operation.

Door Switch

If the door is open, the shredder will not operate.

Automat

ic Sto

When the

shredded paper

ﬁ lls the wastebasket, the “FULL”

light comes on an

d the

cutter stops operation. Open the door,

remove the wastebasket and empty paper scraps. Replace

the wastebasket, close the door and continue operation.

Automatic Power Shut-

Off

•

After

30 minutes of non-use,

a “bee

p” will sound and the power is shut off.

•

If the shredder operat

es continuously for more than 30 minutes, the

power is automatically shut off.

•

To operate the machine continuou

sly for

longer than 30 minutes, push the

“AUTO” button.

Maintenance

•

Disconnect power by pu

lling power

cord plu

g fro

m wall outlet.

•

To clean the exterio

r, wipe the surface with a soft cloth. If the surface is

very

dirty, use a neutral detergent, then w

ipe again with a soft cloth.

CAUT

ION:

•

Never put water directly on the surface of the shredder.

•

ever clean the case with benzene or thinner, since it will cause

discoloration

•

Do not dis

mantle the shredder

Con

tact your

Formax Dealer for service.

Operation

1. Open

the

door and turn the power

switch “ON.” Close

door.

Auto Start

/Auto Stop

When the “START A/M” button is pushed, the

signal lamp

“AUTO” will light

Insert paper to shred. The shredder will

start and stop automatically when using this function.

Manual

Operation

If paper is

too small for the shredder’s sensors to detect,

shred it manually. Push the “START A/M” button once

more and the “MANUAL” lamp will light. Insert paper to

be shredded. Three minutes after shredding, the cutter

automatically stops rotating

Safety Precautions

To avoid

personal injury, and damage to the shredder,

observe the

following safety precautions. Please keep these instructions for future

ference.

•

Keep hands, long hair, clothing

ties, jew

elry and other loose items away

from the paper entrance and shred outlet.

•

Do not use the shredder for anything

other than

its intended pur

pose.

Never use it to shred cloth, plastic, car

dboard or any hard material that

will cause damage to the shredder

blades.

•

Do not all

ow children to use the machine.

•

Do not operate

with a damaged power cord or

plug, o

r when the machine

is damaged in any manner.

•

Unplug the shredder when it is being moved, or if it is not in use

for an

exte

nded period of time.

•

Do not

disconnect the

power

by pulling only the cord. Hold the plug when

disconnecting.

•

Keep the

shredder away from direct sunlight.

•

In case of emergency, push the “STOP” button, or pull

the

plug out of the

wall outlet.

•

Do not sit on the shredder or place anything on top of it.

•

Never open the ﬁ xed switch or cover.

Set-up Guidelines

1. Install the shredder on a level surface, away from heat sources and

direct sunlight.

2. Insert

plug into wall outlet

with the appropriate voltage,

110V. If the outlet

is shared with another e

lectronic devi

ce, the total current should not

exceed 30A (at 110V).

Speciﬁ cations

Cutting Style:

Cross Cut

Strip Cut

Shred Size:

5/32

”

1-1/5

”

5/32

”

Sheet

Capacity

16 to 18

20 to 22

Speed:

31 feet per minute

33 feet per minute

Feed Opening

16”

Dimensions:

24” W x 20” D x 35” H

Bin Capacity:

26 gal.

Weight:

242 lbs.

Power supply:

110V, 50/60Hz

110V

, 50/60Hz

Cutting heads accept credit cards, staples and paper clips.

FD 8500CC

FD 8500S

Reverse

Operation

Push the “REV” button and the signal lamp “REV” will light and cutters will

operate in reverse. If too much paper is inserted at one time in standard

modes, the shredder will automatically operate in reverse. If this occurs,

remove the inserted paper and shred in smaller amounts. NOTE: The

maximum amount of paper to be shredded differs according to paper

quality, humidity and voltage. If the shredder is to be used continuously, do

not insert more than half of the maximum capacity.

Full Sensor

If the wastebas

ket is full, the “FULL” lamp will light and the

cutter will stop

automatically. Open the door,

emp

ty the wastebasket of paper strips/chips,

replace the wastebasket, close door, and continue to shred.

Dieses Handbuch passt für folgende Modelle

Andere Formax Aktenvernichter Handbücher

Formax

Formax FD 8302CC Bedienungsanleitung

Formax

Formax FD 8252CC Bedienungsanleitung

Formax

Formax FD 8906CC Cross-Cut Bedienungsanleitung

Formax

Formax FD 8602CC Bedienungsanleitung

Formax

Formax FD 8702CC Bedienungsanleitung

Formax

Formax Cut-True 29A Bedienungsanleitung

Formax

Formax FD 87HD Bedienungsanleitung

Formax

Formax FD 8400HS Bedienungsanleitung

Formax

Formax FD 8206 Bedienungsanleitung

Formax

Formax COMBI 0030 Bedienungsanleitung

Formax

Formax FD 8712HS Bedienungsanleitung

Formax

Formax Formax FD 415 Betriebsanleitung

Formax

Formax FD 8300HS Bedienungsanleitung

Formax

Formax FD 8804CC Montageanleitung

Formax

Formax FD 8652CC Bedienungsanleitung

Formax

Formax FD 8500CC Bedienungsanleitung

Formax

Formax FD 8732HS Bedienungsanleitung

Formax

Formax FD 8502AF Bedienungsanleitung

Formax

Formax FD 8650CC Bedienungsanleitung

Formax

Formax FD 8402CC Bedienungsanleitung

Formax

Formax FD 8802 series Bedienungsanleitung

Formax

Formax FD 8500HS Bedienungsanleitung

Formax

Formax FD 8650HS Bedienungsanleitung

Formax

Formax FD 8704CC Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

HSM

HSM Pure 740 max Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung