Fujitsu fi-65F Bedienungsanleitung
Getting Started
Getting Started
Image Scanner
Image Scanner
fi-65F
fi-65F
1
Thank you for purchasing the fi-65F color image scanner.
This manual describes the preparation required to use this product. Follow the procedures in this manual.
Make sure to read the attached "Safety Precautions" manual before using the scanner. For details about
scanner functions and features, basic operation, daily care and troubleshooting, refer to the Operator's
Guide (PDF). The Operator's Guide can be displayed by selecting [Browse manual] J[Operator's Guide
(PDF)] in the Setup DVD-ROM.
Microsoft product screenshots in this manual are reprinted with permission from Microsoft Corporation.
Microsoft, Windows, Windows Server, and Windows Vista are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
ISIS is a registered trademark of EMC Corporation in the United States.
Intel, Pentium, and Intel Core are registered trademarks or trademarks of Intel Corporation in the United
States and other countries.
PaperStream is a registered trademark of PFU LIMITED in Japan.
Other company names and product names are the registered trademarks or trademarks of the respective
companies.
September, 2013
© PFU LIMITED 2013
Checking the Components
Make sure that all items shown below are included in the package. If any other packaging is provided, make
sure to keep it as well. The components must be handled with care.
The box and packaging materials are required for storage and transportation of the scanner. Do not throw
them away. If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Scanner (×1)
USB bus power cable (×1)
AC cable (×1)
Setup DVD-ROM (×1)
Safety Precautions (×1)
AC adapter (×1) USB cable (×1)
P3PC-4542-01EN
2
Safety Information
The attached Safety Precautions manual contains
important information about the safe and correct
use of this product. Make sure that you read and
understand it before using the scanner.
Symbols Used in This
Manual
The following symbols are used in this manual.
Removing the Protective
Packaging
The scanner is secured with orange protective
tape. Peel off the tape before using the scanner.
Installing the Software
The following software are bundled with the
scanner:
zPaperStream IP (TWAIN) Driver
Conforms to the TWAIN standard. Used when
you operate the scanner using TWAIN-
compliant 32-bit applications.
zPaperStream IP (TWAIN x64) Driver
Conforms to the TWAIN standard. Used when
you operate the scanner using TWAIN-
compliant 64-bit applications.
Can be installed on 64-bit operating systems.
zPaperStream IP (ISIS) Driver
Conforms to the ISIS standard. Used when you
operate the scanner using ISIS-compliant
applications.
zSoftware Operation Panel
View the scanner information and configure
various settings such as the operation of the
scanner. Installed together with the
PaperStream IP (TWAIN) driver, the
PaperStream IP (TWAIN x64) driver, or the
PaperStream IP (ISIS) driver.
zPaperStream Capture
An image scanning application that supports
the PaperStream IP (TWAIN) driver and the
PaperStream IP (ISIS) driver. By defining scan
settings as document profiles, you can
customize the settings according to your
preference.
zManual
Includes Safety Precautions, Getting Started,
and Operator's Guide.
The system requirements are as follows.
Symbol Description
WARNING
This indication alerts operators to
an operation that, if not strictly
observed, may result in severe
injury or death.
CAUTION
This indication alerts operators to
an operation that, if not strictly
observed, may result in safety
hazards to personnel or damage
to the product.
Bundled Software
System Requirements
Operating
system
z
Windows
®
XP Home Edition
(Service Pack 3 or later)
z
Windows
®
XP Professional
(Service Pack 3 or later)
z
Windows
®
XP Professional x64 Edition
(Service Pack 2 or later)
z
Windows Vista
®
Home Basic
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Vista
®
Home Premium
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Vista
®
Business
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Vista
®
Enterprise
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Vista
®
Ultimate
(32-bit/64-bit) (Service Pack 1 or later)
z
Windows Server
®
2008 Standard
(32-bit/64-bit)
z
Windows Server
®
2008 R2 Standard
(64-bit)
z
Windows
®
7 Home Premium
(32-bit/64-bit)
z
Windows
®
7 Professional
(32-bit/64-bit)
z
Windows
®
7 Enterprise (32-bit/64-bit)
z
Windows
®
7 Ultimate (32-bit/64-bit)
z
Windows Server
®
2012 Standard
(64-bit) (*1)
z
Windows
®
8 (32-bit/64-bit) (*1)
z
Windows
®
8 Pro (32-bit/64-bit) (*1)
zWindows®8 Enterprise (32-bit/64-bit)
(*1)
3
*1: The software operates as a desktop
application.
*2: Required disk space varies according to the
file size of the scanned images.
Install the bundled software from the Setup DVD-
ROM in the following procedure.
Note that there are two ways to install the bundled
software: select [Installation (Recommended)] to
install all the software required to operate the
scanner, or [Installation (Custom)] to select and
install one software at a time.
■Installation (Recommended)
The following software are installed:
zPaperStream IP (TWAIN) Driver
zPaperStream IP (TWAIN x64) Driver
zSoftware Operation Panel
zPaperStream Capture
zManual
1. Turn on the computer and log onto
Windows®as a user with Administrator
privileges.
2. Insert the Setup DVD-ROM into the DVD
drive.
DThe [fi Series Setup] screen appears.
3. Click the [Installation (Recommended]
button.
4. Follow the instructions on the screen to
proceed with the installation.
CPU
Intel
®
Pentium
®
4 1.8 GHz or higher
(Recommended:
Intel
®
Core™ i5 2.5 GHz or higher,
excluding mobile processors)
Memory
1 GB or more
(Recommended: 4 GB or more)
Hard disk
drive
5,400 rpm or more
(Recommended: 7,200 rpm or more)
Display
resolution
1,024 × 768 pixels or more,
65,536 colors or more
Hard disk
space
800 MB or more of free hard disk space
(*2)
DVD
drive
Required for installing the software
Interface USB 2.0/1.1
ATTENTION
zIf the system requirements above are not
satisfied, the scanner may not operate.
zScanning speed will slow down in the following
cases:
- The CPU or the memory does not meet the
required specifications
- The version of the USB port or the USB hub
is USB 1.1
HINT
The screenshots used in this manual are of
Windows®7. The actual windows and
operations may differ depending on the
operating system.
Where there is no distinction between the
different versions of the operating system
shown in the table of system requirements, the
general term Windows®is used.
Installing the Bundled Software
ATTENTION
If an old version of the software is installed
already, uninstall it first.
For details about the uninstallation procedures,
refer to "A.4 Uninstalling the Software" in the
Operator's Guide.
HINT
If the [fi Series Setup] screen does not
appear, double-click "Setup.exe" in the
Setup DVD-ROM via Windows Explorer or
[Computer].
4
■Installation (Custom)
1. Perform steps 1. to 2. in "Installation
(Recommended) (page 3)".
2. Click the [Installation (Custom)] button.
3. Select the check box for the software to
install and click the [Next] button.
4. Follow the instructions on the screen to
proceed with the installation.
Installing the Scanner
Install the scanner in the following procedure.
1. Place the scanner at its installation site.
2. Unlock the transport lock switch.
There is a carrier unit inside the flatbed which
is fixed in place to prevent damage during
transportation.
Slide the transport lock switch on the back.
Connecting the Cables
Connect each cable in the following procedure.
1. Confirm that the computer is turned off.
2. Connect the USB cable to the USB
connector of the scanner and USB port of
the computer.
ATTENTION
Carry the scanner by supporting it from the
bottom.
145 (5.71)
257
281
234
(10.12)
40 (1.57)
(11.06)
(9.21)
145 (5.71)
Outer dimensions
Installation space
Unit: mm (in.)
Locked Unlocked
Transport lock switch
CAUTION
Only use the supplied AC adapter. Not doing
so may cause the scanner to malfunction.
Furthermore, do not use the supplied AC
adaptor for other products.
ATTENTION
zUse the supplied USB cable.
zWhen you use a USB hub, a USB 2.0
certified hub is recommended. If the
scanner that is connected to the USB hub
does not operate properly, connect the
USB cable to the USB port of the
computer directly.
zIf you connect the scanner with USB 2.0,
it is required that the USB port be
compliant with USB 2.0. The scanning
speed slows down when you connect the
scanner with USB 1.1.
zConnect it with
the USB mark
facing up.
1
3
2
2
3
3
USB connector
AC cable
USB cable
Power connector
AC adapter
USB bus power cable
USB mark
5
3. Connect the power cable or USB bus
power cable.
zFor the power cable connection
The AC cable and AC adapter connected to
each other are collectively called the "power
cable".
Connect the power cable to the power
connector of the scanner, and plug the other
end into an AC outlet.
zFor the USB bus power cable
Connect the USB bus power cable to the
power connector of the scanner and to the
USB port of the computer.
Test-Scan
Follow the procedure described below to check
that documents can be scanned correctly by using
PaperStream Capture and the PaperStream IP
(TWAIN) driver.
1. Turn on the computer.
DThe scanner is turned on, and the power
LED lights in green.
DThe scanner is automatically recognized
by the computer.
2. Place a document on the scanner.
1. Open the document cover.
2. Place the document on the document bed.
Place the document face-down to align its
top left-hand corner with the reference point.
3. Gently close the document cover.
WARNING
Only use the power cable or USB bus
power cable that is supplied with the
scanner.
Doing the following may cause an electric
shock or the scanner to malfunction:
zUsing a power cable or USB bus power
cable that is not supplied with the
scanner.
zUsing the supplied power cable or USB
bus power cable with other products.
ATTENTION
If the power LED does not light in green,
refer to "Chapter 6 Troubleshooting" in the
Operator's Guide.
Power LED
HINT
When the [Found New Hardware] dialog
box appears, click [Locate and install driver
software (recommended)] and then follow
the instructions on the screen to proceed
with the installation.
Document cover
ABC
ABC
Reference point
Document bed
ABC
Document
cover
6
3. Start up PaperStream Capture.
Select the [Start] menu J[All Programs] J
[PaperStream Capture] J[PaperStream
Capture].
(For Windows Server
®
2012 or Windows
®
8,
right-click the Start screen, select [All apps]
on the app bar, and then select
[PaperStream Capture] in [PaperStream
Capture].)
4. Click [Scan] in the menu area.
5. Click one of the three types of document
profiles that are prepared beforehand.
Below is an example of when the document
profile [Binary] is clicked.
DThe document is scanned, and the
scanned image is displayed.
For details about other scanning features, refer to
"Chapter 4 Various Ways to Scan" in the
Operator's Guide.
Contact for Inquiries
Refer to the contact list on the last page of the
Safety Precautions manual.
zColor Image Scanner fi Series
For other inquiries regarding the scanner,
refer to the following web page:
http://imagescanner.fujitsu.com/g-support.html
If the solution to your problem cannot be
found on the above web page, refer to the
contact information for your Fujitsu office on
the following web page:
http://imagescanner.fujitsu.com/warranty.html
http://www.fujitsu.com/global/shop/computing/
IMAGE_index.html
Notice
zCopying of the contents of this document in whole
or in part and copying of the scanner application is
prohibited under the copyright law.
zThe contents of this document are subject to
change without notice.
ATTENTION
If a problem occurs, refer to "Chapter 6
Troubleshooting" in the Operator's Guide.
Contact for Purchasing Consumables
or Cleaning Materials
Andere Handbücher für fi-65F
2
Inhaltsverzeichnis
Andere Fujitsu Scanner Handbücher
Fujitsu
Fujitsu ScanPartner 620C Bedienungsanleitung
Fujitsu
Fujitsu ScanSnap S1300 Bedienungsanleitung
Fujitsu
Fujitsu ScanSnap fi-5110C Bedienungsanleitung
Fujitsu
Fujitsu ScanPartner 3091DC Bedienungsanleitung
Fujitsu
Fujitsu FI 4220C - Document Scanner Bedienungsanleitung
Fujitsu
Fujitsu fi-7300NX Handbuch
Fujitsu
Fujitsu FI-5530C2 Konfigurationshandbuch
Fujitsu
Fujitsu fi-6800 Bedienungsanleitung
Fujitsu
Fujitsu ScanSnap fi-5110EOXM Handbuch
Fujitsu
Fujitsu fi-4530C Bedienungsanleitung
Fujitsu
Fujitsu ScanPartner 93GX Bedienungsanleitung
Fujitsu
Fujitsu M3099EX/EH Installations- und Betriebshandbuch
Fujitsu
Fujitsu M3096EX Handbuch
Fujitsu
Fujitsu ScanSnap N1800 Handbuch
Fujitsu
Fujitsu ScanPartner 15C Bedienungsanleitung
Fujitsu
Fujitsu FI-4010CU Bedienungsanleitung
Fujitsu
Fujitsu PFU fi-5110C Konfigurationshandbuch
Fujitsu
Fujitsu FI-4120C Referenzhandbuch
Fujitsu
Fujitsu S1500M - ScanSnap - Document Scanner Handbuch
Fujitsu
Fujitsu fi-7160 Bedienungsanleitung
Beliebte Scanner Handbücher anderer Marken
Infinite Peripherals
Infinite Peripherals INFINEA TAB M Bedienungsanleitung
Mustek
Mustek PageExpress 4800 Pro Bedienungsanleitung
Optex
Optex 750830 Bedienungsanleitung
Innova
Innova 5210 Bedienungsanleitung
Visioneer
Visioneer CardReader 100 Kurzanleitung
Rohde & Schwarz
Rohde & Schwarz TSME6 Bedienungsanleitung