Fujitsu PRIMERGY BX924 S4 Bedienungsanleitung

Upgrade and Maintenance Manual - English

PRIMERGY BX924 S4

Server Blade

Upgrade and Maintenance Manual

Edition February 2014

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]su.com.

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

BX924 S4 Upgrade and Maintenance Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Upgrade and Maintenance Manual BX924 S4

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market: About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

BX924 S4 Upgrade and Maintenance Manual

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– CSS (Customer Self Service)

Upgrade and Maintenance Manual BX924 S4

BX924 S4 Upgrade and Maintenance Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.1 Notational conventions . . . . . . . . . . . . . . . . . . . . 18

2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . 19

2.1 Classification of procedures . . . . . . . . . . . . . . . . . 21

2.1.1 Upgrade and Repair Units (URU) . . . . . . . . . . . . . . . . 22

2.1.2 Field Replaceable Units (FRU) . . . . . . . . . . . . . . . . . 23

2.2 Average task duration . . . . . . . . . . . . . . . . . . . . . 24

2.3 Tools you need at hand . . . . . . . . . . . . . . . . . . . . 25

2.4 Documents you need at hand . . . . . . . . . . . . . . . . . 26

3 Important information . . . . . . . . . . . . . . . . . . . . . 29

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 29

3.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 36

3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 37

3.4 Environmental protection . . . . . . . . . . . . . . . . . . . 38

4 Basic hardware procedures . . . . . . . . . . . . . . . . . . 41

4.1 Using diagnostics information . . . . . . . . . . . . . . . . 41

4.1.1 Accessing the management blade web interface . . . . . . . . 41

4.1.2 Locating the defective server blade . . . . . . . . . . . . . . . 43

4.1.3 Determining the error class . . . . . . . . . . . . . . . . . . . 44

4.1.3.1 Global Error indicator . . . . . . . . . . . . . . . . . . . . 45

4.1.3.2 Customer Self Service (CSS) indicator . . . . . . . . . . . 46

4.1.4 Locating the defective component . . . . . . . . . . . . . . . . 48

4.2 Opening the rack door . . . . . . . . . . . . . . . . . . . . . 51

4.2.1 Opening the rack door of a PRIMECENTER rack . . . . . . . . 51

4.2.2 Opening the rack door of a PRIMECENTER M1 rack . . . . . . 51

4.3 Shutting down the server blade . . . . . . . . . . . . . . . . 52

Upgrade and Maintenance Manual BX924 S4

Contents

4.4 Removing a server blade . . . . . . . . . . . . . . . . . . . . 53

4.4.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . . 53

4.4.2 Removing the server blade from the system unit . . . . . . . . . 54

4.5 Opening the server blade . . . . . . . . . . . . . . . . . . . . 55

4.6 Closing the server blade . . . . . . . . . . . . . . . . . . . . 56

4.7 Installing the server blade in the system unit . . . . . . . . . 57

4.8 Switching on the server blade . . . . . . . . . . . . . . . . . 60

4.9 Concluding software tasks . . . . . . . . . . . . . . . . . . . 61

4.10 Closing the rack door . . . . . . . . . . . . . . . . . . . . . . 62

4.10.1 Closing the rack door of a PRIMECENTER rack . . . . . . . . . 62

4.10.2 Closing the rack door of a PRIMECENTER M1 rack . . . . . . . 62

5 Basic software procedures . . . . . . . . . . . . . . . . . . . 63

5.1 Starting the maintenance task . . . . . . . . . . . . . . . . . 63

5.1.1 Launching a video redirection to a server blade . . . . . . . . . 63

5.1.2 Checking the server blade status . . . . . . . . . . . . . . . . . 63

5.1.2.1 Checking the server blade status via management blade

web interface . . . . . . . . . . . . . . . . . . . . . . . . . 63

5.1.2.2 Checking the server blade status via iRMC . . . . . . . . . . 64

5.1.3 Saving BIOS settings . . . . . . . . . . . . . . . . . . . . . . . 65

5.1.4 Saving iRMC settings . . . . . . . . . . . . . . . . . . . . . . . 65

5.1.5 Connecting virtual media to the managed server blade . . . . . 65

5.1.6 Disabling BitLocker functionality . . . . . . . . . . . . . . . . . 66

5.1.7 Disabling boot watchdog functionality . . . . . . . . . . . . . . 67

5.1.7.1 Viewing boot watchdog settings . . . . . . . . . . . . . . . . 67

5.1.7.2 Configuring boot watchdog settings . . . . . . . . . . . . . . 68

5.1.8 Verifying and configuring the backup software solution . . . . . . 69

5.1.9 Note on server maintenance in a Multipath I/O environment . . . 70

5.1.10 Switching on the ID indicator . . . . . . . . . . . . . . . . . . . 72

5.2 Completing the maintenance task . . . . . . . . . . . . . . . 73

5.2.1 Updating or recovering the system board BIOS and iRMC . . . . 73

5.2.1.1 Updating or recovering the system board BIOS . . . . . . . . 73

5.2.1.2 Updating or recovering the iRMC . . . . . . . . . . . . . . . 76

5.2.2 Restoring BIOS settings . . . . . . . . . . . . . . . . . . . . . 78

5.2.3 Restoring iRMC settings . . . . . . . . . . . . . . . . . . . . . 78

5.2.4 Updating mezzanine card firmware . . . . . . . . . . . . . . . . 78

5.2.5 Enabling Option ROM scan . . . . . . . . . . . . . . . . . . . . 80

BX924 S4 Upgrade and Maintenance Manual

Contents

5.2.6 Verifying and configuring the backup software solution . . . . . 81

5.2.7 Resetting the boot retry counter . . . . . . . . . . . . . . . . . 82

5.2.7.1 Viewing the boot retry counter . . . . . . . . . . . . . . . . 82

5.2.7.2 Resetting the boot retry counter . . . . . . . . . . . . . . . 82

5.2.8 Enabling boot watchdog functionality . . . . . . . . . . . . . . 84

5.2.9 Enabling replaced components in the system BIOS . . . . . . . 85

5.2.10 Verifying the memory mode . . . . . . . . . . . . . . . . . . . 85

5.2.11 Verifying the system time settings . . . . . . . . . . . . . . . . 86

5.2.12 Viewing and clearing the System Event Log (SEL) . . . . . . . 87

5.2.12.1 Viewing the SEL . . . . . . . . . . . . . . . . . . . . . . . 87

5.2.12.2 Saving the SEL . . . . . . . . . . . . . . . . . . . . . . . . 88

5.2.12.3 Clearing the SEL . . . . . . . . . . . . . . . . . . . . . . . 89

5.2.13 Updating the NIC configuration file in a Linux environment . . . 89

5.2.14 Enabling BitLocker functionality . . . . . . . . . . . . . . . . . 91

5.2.15 Performing a RAID array rebuild . . . . . . . . . . . . . . . . . 92

5.2.16 Looking up changed MAC / WWN addresses . . . . . . . . . . 92

5.2.16.1 Looking up MAC addresses . . . . . . . . . . . . . . . . . 92

5.2.16.2 Looking up WWN addresses . . . . . . . . . . . . . . . . . 93

5.2.17 Using the Chassis ID Prom Tool . . . . . . . . . . . . . . . . . 94

5.2.18 Configuring LAN teaming . . . . . . . . . . . . . . . . . . . . 94

5.2.18.1 After replacing / upgrading LAN/CNA controllers . . . . . . 94

5.2.18.2 After replacing the server blade . . . . . . . . . . . . . . . 95

5.2.19 Switching off the ID indicator . . . . . . . . . . . . . . . . . . 95

6 Hard disk drives / Solid state drives . . . . . . . . . . . . . 97

6.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 97

6.2 Overview of the disk mounting kits . . . . . . . . . . . . . . 98

6.3 Installing HDD/SSD . . . . . . . . . . . . . . . . . . . . . . . 99

6.3.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 99

6.3.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 99

6.3.3 Locations of the drives inside the server blade . . . . . . . . . 100

6.3.4 Installing SSD 0 . . . . . . . . . . . . . . . . . . . . . . . . . 101

6.3.5 Installing HDD/SSD 1 . . . . . . . . . . . . . . . . . . . . . . 103

6.3.6 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 107

6.4 Removing HDD/SSD . . . . . . . . . . . . . . . . . . . . . . 108

6.4.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 108

6.4.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 108

6.4.3 Removing SSD 0 . . . . . . . . . . . . . . . . . . . . . . . . 109

6.4.4 Removing HDD/SSD 1 . . . . . . . . . . . . . . . . . . . . . 111

Upgrade and Maintenance Manual BX924 S4

Contents

6.4.5 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 113

6.5 Replacing a HDD/SSD . . . . . . . . . . . . . . . . . . . . . 114

6.5.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 114

6.5.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 114

6.5.3 Removing a HDD/SSD 1 . . . . . . . . . . . . . . . . . . . . 115

6.5.4 Installing a HDD/SSD 1 . . . . . . . . . . . . . . . . . . . . . 115

6.5.5 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 115

6.6 Replacing SAS / PCH backplanes . . . . . . . . . . . . . . 116

6.6.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 116

6.6.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 116

6.6.3 Removing the SAS / PCH backplane . . . . . . . . . . . . . . 117

6.6.4 Installing the SAS / PCH backplane . . . . . . . . . . . . . . 118

6.6.5 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 120

7 Mezzanine cards . . . . . . . . . . . . . . . . . . . . . . . 121

7.1 Basic information . . . . . . . . . . . . . . . . . . . . . . . 122

7.1.1 Installing riser cards . . . . . . . . . . . . . . . . . . . . . . . 124

7.1.2 Removing riser cards . . . . . . . . . . . . . . . . . . . . . . 126

7.1.3 Population rules for mezzanine cards . . . . . . . . . . . . . 128

7.2 Installing mezzanine cards . . . . . . . . . . . . . . . . . . 134

7.2.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 134

7.2.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 134

7.2.3 Installing a mezzanine card . . . . . . . . . . . . . . . . . . . 135

7.2.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 139

7.3 Removing mezzanine cards . . . . . . . . . . . . . . . . . 140

7.3.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 140

7.3.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 140

7.3.3 Removing a mezzanine card . . . . . . . . . . . . . . . . . . 141

7.3.4 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 143

7.4 Replacing mezzanine cards . . . . . . . . . . . . . . . . . . 144

7.4.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 144

7.4.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 144

7.4.3 Removing a mezzanine card . . . . . . . . . . . . . . . . . . 145

7.4.4 Installing a mezzanine card . . . . . . . . . . . . . . . . . . . 145

7.4.5 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . 145

8 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . 147

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY TX100 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX100 S3 Bedienungsanleitung

Fujitsu

Fujitsu SE500 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 3800E Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX600 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEPOWER850 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX600 S3 Betriebsanleitung

Fujitsu

Fujitsu FUTRO A300 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX100 S7 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Fujitsu

Fujitsu BS2000/OSD Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX400 S1 Bedienungsanleitung

Fujitsu

Fujitsu primergy TX150 Bedienungsanleitung

Fujitsu

Fujitsu SPARC M10-4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service-Handbuch

Fujitsu

Fujitsu SPARC Enterprise T5120 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S4 Bedienungsanleitung

Fujitsu

Fujitsu primequest 2400E2 Leitfaden

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S5 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung