Fujitsu Primergy RX600 S2 Bedienungsanleitung

Produktfamilie

PRIMERGY RX600 S2

Operating Manual

Gottfried Staubach

Fujitsu Siemens Computers GmbH Paderborn

33094 Paderborn

e-mail: email: [email protected]

Tel.: 05251 14888-19

Fax: (++49) 700 / 372 00001

A3C40069794

Sprachen: En

Edition May 2005

This manual is printed on

paper treated with

chlorine-free bleach.

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Fax forms for sending us your comments are included in

the back of the manual.

There you will also find the addresses of the relevant

User Documentation Department.

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

Introduction

Overview of Installation Steps

Important Notes

Hardware Installation

Commissioning and Operation

Property and Data Protection

Problem Solutions and Tips

Hot-plug Components

Abbreviations, Related Literature, Index

A3C40069794

Contents

1Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Overview of the Documentation . . . . . . . . . . . . . . . . . . 1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3 Notational Conventions . . . . . . . . . . . . . . . . . . . . . . 9

1.4 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2 Overview of Installation Steps . . . . . . . . . . . . . . . . . 13

3 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . 15

3.1 Notes on Safety . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.2 CE Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.3 FCC Class A Compliance Statement . . . . . . . . . . . . . . 21

3.4 Transporting the Server . . . . . . . . . . . . . . . . . . . . . 22

3.5 Notes on Installing into the Rack . . . . . . . . . . . . . . . . 23

3.6 Environmental Protection . . . . . . . . . . . . . . . . . . . . 24

4 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . 27

4.1 Installation Steps . . . . . . . . . . . . . . . . . . . . . . . . 28

4.2 Unpacking the Server . . . . . . . . . . . . . . . . . . . . . . 28

4.3 Installing/Removing the Server into the Rack . . . . . . . . . . 29

4.3.1 Mounting into the PRIMECENTER Rack . . . . . . . . . . . . 33

4.3.2 Mounting into the DataCenter Rack . . . . . . . . . . . . . . . 35

4.3.3 Mounting into 3rd-Party Racks . . . . . . . . . . . . . . . . . . 35

4.3.4 Installing the Server . . . . . . . . . . . . . . . . . . . . . . . 36

4.4 Connecting Devices to the Server . . . . . . . . . . . . . . . . 39

4.5 Connecting the Server to the Mains Voltage . . . . . . . . . . . 41

4.6 Connecting the Monitor . . . . . . . . . . . . . . . . . . . . . 42

4.7 Hints: Connecting/Disconnecting Cables . . . . . . . . . . . . 43

5 Commissioning and Operation . . . . . . . . . . . . . . . . 45

5.1 Operating and Indicator Elements . . . . . . . . . . . . . . . . 45

5.1.1 The Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

5.1.1.1 Operating Elements . . . . . . . . . . . . . . . . . . . . . . . 46

5.1.1.2 Indicators on the Operating Panel . . . . . . . . . . . . . . . . 47

5.1.1.3 Indicators on the Accessible Drives/Components . . . . . . . . 49

5.1.1.4 Hard Disk Drive Indicators . . . . . . . . . . . . . . . . . . . . 52

5.1.1.5 Indicators on the Hot-plug Fans . . . . . . . . . . . . . . . . . 53

5.1.2 The Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

5.1.2.1 LAN Indicators on the Connection Panel . . . . . . . . . . . . 54

5.1.2.2 ID indicator and ID button . . . . . . . . . . . . . . . . . . . . 55

5.1.2.3 Indicators on the Hot-plug Power Supply Units . . . . . . . . . 56

A3C40069794

Contents

5.2 Switching the Server ON and OFF . . . . . . . . . . . . . . . . 57

5.3 Configuring the Server . . . . . . . . . . . . . . . . . . . . . . 59

5.3.1 Configuring the SCSI RAID Controller . . . . . . . . . . . . . . 59

5.3.2 Configuration with ServerStart . . . . . . . . . . . . . . . . . . 60

5.3.3 Configuration without ServerStart . . . . . . . . . . . . . . . . 61

5.4 Cleaning the Server . . . . . . . . . . . . . . . . . . . . . . . . 62

6 Property and Data Protection . . . . . . . . . . . . . . . . . . 63

6.1 Mechanical Access Protection . . . . . . . . . . . . . . . . . . 63

6.2 BIOS Setup Security Functions . . . . . . . . . . . . . . . . . . 63

7 Problem Solutions and Tips . . . . . . . . . . . . . . . . . . 65

7.1 Power-on Indicator Remains Dark . . . . . . . . . . . . . . . . 65

7.2 The Server Switches itself OFF . . . . . . . . . . . . . . . . . . 66

7.3 The Monitor Remains Dark . . . . . . . . . . . . . . . . . . . . 66

7.4 Flickering Stripes across the Monitor . . . . . . . . . . . . . . . 67

7.5 No Monitor Display or Display Drifts . . . . . . . . . . . . . . . 67

7.6 Time and/or Date are Incorrect . . . . . . . . . . . . . . . . . . 67

7.7 System Fails to Boot . . . . . . . . . . . . . . . . . . . . . . . 68

7.8 Drives "dead" at System Boot . . . . . . . . . . . . . . . . . . 68

7.9 Added Drive Defective . . . . . . . . . . . . . . . . . . . . . . 68

7.10 Error Messages on the Monitor . . . . . . . . . . . . . . . . . . 69

7.11 Error Messages on the Control Panel (LocalView) . . . . . . . . 69

8 Hot-plug Components . . . . . . . . . . . . . . . . . . . . . . 71

8.1 Replacing a Hot-plug Power Supply Unit . . . . . . . . . . . . . 71

8.2 Replacing a Hot-plug System Fan Unit . . . . . . . . . . . . . . 73

8.3 Hot-plug Hard Disk Drives . . . . . . . . . . . . . . . . . . . . 74

8.3.1 Handling HDD Modules . . . . . . . . . . . . . . . . . . . . . . 75

8.3.2 Installing/Removing a HDD/Dummy Module . . . . . . . . . . . 76

8.4 Hot-plug Memory Boards . . . . . . . . . . . . . . . . . . . . . 80

8.4.1 Removing a Hot-plug Memory Board . . . . . . . . . . . . . . . 81

8.4.2 Removing the Dummy Module . . . . . . . . . . . . . . . . . . 82

8.4.3 Inserting a Hot-plug Memory Board . . . . . . . . . . . . . . . 83

8.5 Hot-plug PCI Boards . . . . . . . . . . . . . . . . . . . . . . . 84

8.5.1 Removing Hot-plug PCI Boards . . . . . . . . . . . . . . . . . 86

8.5.2 Removing the Dummy Module . . . . . . . . . . . . . . . . . . 90

8.5.3 Inserting a Hot-plug PCI Board . . . . . . . . . . . . . . . . . . 92

8.6 Opening/Closing the Casing . . . . . . . . . . . . . . . . . . . 94

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

A3C40069794 1

1 Introduction

The PRIMERGY RX600 S2 server is an Intel-based server for mid-size and

large companies. The server is suitable for use as a file server and also as an

application, information or Internet server. It is available as a rack model.

The PRIMERGY RX600 S2 server offers a high level of reliability and availability

through highly developed hardware and software components. These include

hot-plug hard disk drive modules, hot-plug system fans and power supply units,

hot-plug PCI slots and memory boards, the ServerView server management

software, “Prefailure Detection and Analysing” (PDA) and “Automatic Server

Reconfiguration and Restart” (ASR&R).

Security functions in the BIOS Setup and on the system board protect the data

on the server against manipulation. Additional security is provided by the

lockable rack door.

This server occupies 4 height units (HU) in the rack.

1.1 Overview of the Documentation

IPRIMERGY manuals are available in PDF format on the ServerBooks CD

which is part of the PRIMERGY ServerView Suite delivered with each

server system.

The PDF files for the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available on the Internet can be found via the URL:

http://manuals.fujitsu-siemens.com (choose: intel based servers).

2 A3C40069794

Overview of the Documentation Introduction

Concept and Target Group of this Manual

This operating manual describes how to install, commission and operate your

server.

It is intended for those responsible for installing the hardware and ensuring that

the system runs smoothly. The manual contains all of the information required

for installing your PRIMERGY RX600 S2 server.

To understand the different expansion options it is necessary to have a

knowledge of hardware and data transmission, as well as basic knowledge of

the operating system used.

Additional Components of the Server Documentation

The PRIMERGY RX600 S2 documentation comprises the following manuals:

– "Quick Start Hardware - PRIMERGY RX600 S2" (poster)

– "Quick Start Software - PRIMERGY ServerView Suite" (poster)

– "Warranty" manual (print version delivered together with the system, PDF

file available on the ServerBooks CD also delivered with the system)

– "Safety" manual (print version always delivered together with the system,

PDF file available on the ServerBooks CD)

– "Ergonomics" manual (PDF file available on the ServerBooks CD)

– "Helpdesk" (poster with worldwide helpdesk telephone numbers)

– Technical Manual for the D1651 system board (PDF file available on the

ServerBooks CD)

– "D1651 BIOS Setup Utility" (PDF file available on the ServerBooks CD)

– "PRIMERGY RX600 S2 Server System Options Guide" (PDF file available

on the ServerBooks CD)

IIn the Options Guide, the server extension and modification possibil-

ities are described.

– "ServerView Suite" includes the ServerStart CD, the ServerBooks CD and the

ServerSupport CDs. The PDF version of the user manual "PRIMERGY -

ServerView Suite - ServerStart" is also available on the ServerBooks CD.

IIf you need a backup of the ServerBooks CD, send the details of your

server via email address: R[email protected].

A3C40069794 3

Introduction Overview of the Documentation

– "MegaRAID 320 Storage Adapters" (PDF file available on the ServerBooks

CD)

– "MegaRAID Device Driver Installation" (PDF file available on the ServerBooks

CD)

– "MegaRAID Configuration Software" (PDF file available on the ServerBooks

CD)

– "Global Array Manager Client Software User’s Guide" (PDF file available on

the ServerBooks CD)

– "Global Array Manager Server Software User’s Guide" (PDF file available on

the ServerBooks CD)

Other Sources of Information

– Technical manual for the rack

– Manual for the monitor

– Manual for ServerView server management software

– Manual for the remote test and diagnostic system RemoteView

– Documentation for the boards and drives

– Documentation for your operating system

– Information files for your operating system

(see also “Related publications” on page 103)

4 A3C40069794

Features Introduction

1.2 Features

System Board

The features of the system board (D1651) are described in the technical manual

for the system board in relation to the hardware and in the BIOS setup manual for

the firmware (see “Related publications” on page 103).

Hot-Plug PCI Slots

In addition to two standard PCI slots, the server also comprises five hot-plug

PCI slots (for one PCI-X board and four PCI Express boards) that allow boards

to be installed and removed online, assuming the operating system supports

this functionality (for further information see section “Hot-plug PCI Boards” on

page 84).

Hard Disk Drives

The server has a drive bay that can each accommodate up to five ULTRA 320-

SCSI hard disk drive modules. Each hard disk drive module (HDD module) can

accommodate a SCSI hard disk drive with an SCA (Single Connector

Attachment) interface and a maximum height of 1 inch. The module is

connected to the SCSI backplane without cables via the SCA interface. This

allows hard disk drive modules to be simply plugged in or pulled out (for further

details see section “Hot-plug Hard Disk Drives” on page 74).

The hard disk drive system is designed for Ultra3 SCSI and is operated using

two channels with three (channel A) and two (channel B) hard disk drives each.

The hard disk drives can either be operated in "pure" SCSI mode by the

onboard controller (see “SCSI Controller” on page 5) or by an additional RAID

controller (see “MegaRAID RoMB Controller” on page 5).

With a RAID controller and the corresponding RAID configuration, defective

HDD modules may be replaced while the system is running (hot-plug).

An external SCSI interface is also offered optionally to allow external storage

subsystems to be connected.

Andere Handbücher für Primergy RX600 S2

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu Primepower200 Bedienungsanleitung

Fujitsu

Fujitsu Primergy BX920 S3 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Bedienungs- und Wartungsanleitung

Fujitsu

Fujitsu PRIMERGY BX960 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY 300 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX4770 M4 Bedienungsanleitung

Fujitsu

Fujitsu BS2000 SE Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2450 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX150 S7 Bedienungsanleitung

Fujitsu

Fujitsu Primergy TX120 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX120 S3p Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S3 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY Econel 100 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S5 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu FUTRO S940 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY SX940 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY ECONEL30 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung