Fujitsu PRIMERGY RX2540 M4 Bedienungsanleitung

Operating Manual - English

FUJITSU Server PRIMERGY RX2530 M4

Operating Manual

July 2017

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

RX2530 M4

Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Operating Manual

RX2530 M4

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for Japan:

About SATA HDDs

The SATA version of this server supports HDDs with SATA / BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of HDD:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

RX2530 M4

Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Concept and target groups for this manual . . . . . . . . . . 9

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 10

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 11

2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 13

2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.2 Server specification . . . . . . . . . . . . . . . . . . . . . . 22

3 Installation steps, overview . . . . . . . . . . . . . . . . . . 31

4 Important information . . . . . . . . . . . . . . . . . . . . . 33

4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 33

4.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 42

4.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 42

4.4 Environmental protection . . . . . . . . . . . . . . . . . . . 43

5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 45

5.1 Unpacking the server . . . . . . . . . . . . . . . . . . . . . 46

5.2 Installing/removing the server in/from the rack . . . . . . . 47

5.3 Connecting devices to the server . . . . . . . . . . . . . . . 49

5.4 Connecting the server to the mains . . . . . . . . . . . . . . 52

5.4.1 Connecting the server to the direct current (optional DC PSU) . 53

5.4.2 Using the cable clamps (AC PSU) . . . . . . . . . . . . . . . . 54

5.5 Notes on connecting/disconnecting cables . . . . . . . . . 55

Operating Manual

RX2530 M4

Contents

6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 57

6.1 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 57

6.1.1 Server front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

6.1.1.1 Controls on the front panel . . . . . . . . . . . . . . . . . . 57

6.1.1.2 Indicators on the front panel . . . . . . . . . . . . . . . . . . 59

6.1.1.3 Indicators on the accessible drives/components . . . . . . . 62

6.1.2 Server rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

6.1.2.1 Indicators on the I/O panel . . . . . . . . . . . . . . . . . . 64

6.1.2.2 Indicator on PSU (slide-in unit) . . . . . . . . . . . . . . . . 67

6.1.2.3 Indicator on Fujitsu battery unit (FJBU) . . . . . . . . . . . . 68

6.1.3 Indicators of the hot-plug system fans . . . . . . . . . . . . . . 68

6.2 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

6.3 Switching the server on and off . . . . . . . . . . . . . . . . 70

6.4 Configuring the server . . . . . . . . . . . . . . . . . . . . . 73

6.4.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 73

6.4.2 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 74

6.4.3 Configuring the server and installing the operating system

with the ServerView Installation Manager . . . . . . . . . . . . . 75

6.4.4 Configuring the server and installing the operating system

without the ServerView Installation Manager . . . . . . . . . . . 76

6.5 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 77

7 Property and data protection . . . . . . . . . . . . . . . . . . 79

7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 79

8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 81

8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 81

8.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 82

8.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 82

8.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 83

8.5 No screen display or display drifts . . . . . . . . . . . . . . . 83

8.6 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 84

8.7 System will not boot . . . . . . . . . . . . . . . . . . . . . . . 84

RX2530 M4

Operating Manual

Contents

8.8 Drives reported as “dead” when starting system . . . . . . 84

8.9 Added drive reported as defective . . . . . . . . . . . . . . 85

8.10 Error message on screen . . . . . . . . . . . . . . . . . . . 85

8.11 Expansion cards or onboard devices not recognized . . . . 85

8.12 Temperature warning . . . . . . . . . . . . . . . . . . . . . . 86

8.13 No effect of keyboard or mouse . . . . . . . . . . . . . . . . 86

8.14 Optical drive cannot read data . . . . . . . . . . . . . . . . 86

Operating Manual

RX2530 M4

Contents

RX2530 M4

Operating Manual 9

1 Introduction

The FUJITSU Server PRIMERGY RX2530 M4 is a rack server that provides

high performance, expandability and energy efficiency in 1U space saving

housing. The PRIMERGY RX2530 M4 is ideal for virtualization, scale-out

scenarios, and small databases as well as for high performance computing

thanks to the high performance of the new Intel

Xeon

P-family CPUs with up

to 28 cores, optionally with embedded FPGA-functionality and the latest DDR4

memory technology. Moreover, the RX2530 M4 delivers a great expandability,

by supporting up to 3,072 GB of main memory and is future-proof with M.2

device support and the latest iRMC S5 for server management of the next

generation. NV-DIMMs will be supported from mid-2018 on. Up to 10 hard disk

drives (HDDs) and optionally up to four high-speed PCIe Solid State Drives

(SSDs) offer a flexible storage configuration option. OCP 2.0 technology is

onboard to ensure future requirements are met and budgets are saved. The

limited space of a 1U chassis offers highly efficient power supply units, their

redundancy on demand and the optional Advanced Thermal Design, will result

in lower operational costs.

1.1 Concept and target groups for this manual

This operating manual describes how to install, set up and operate your server.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the

information you need to put your PRIMERGY RX2530 M4 into operation.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

10 Operating Manual

RX2530 M4

Introduction

1.2 Documentation overview

More information on your PRIMERGY RX2530 M4 can be found in the following

documents:

– "Quick Start Hardware - FUJITSU Server PRIMERGY RX2530 M4"

– "ServerView Quick Start Guide"

– "Safety Notes and Regulations" manual

"安全上のご注意 " for Japan

– "Warranty" manual

"保証書 " for Japan

– "ServerView Suite Local Service Concept - LSC" manual

– "Returning used devices" manual and "Service Desk" leaflet

"サポート＆サービス " for Japan

– "FUJITSU Server PRIMERGY RX2530 M4 Upgrade and Maintenance

Manual"

– "D3383 BIOS Setup Utility for FUJITSU Server PRIMERGY RX2530 M4

Reference Manual"

– "iRMC S5 - Concepts and Interfaces" user guide

– "iRMC S5 - Configuration and Maintenance" user guide

– "iRMC S5 - Web Interface" user guide

– "ServerView embedded Lifecycle Management (eLCM)" User Guide

– "Integrated RAID for SAS User Guide"

– "LSI MegaRAID - SAS Software User Guide"

– "Modular RAID Controller / Modular SAS HBA Installation Guide"

Andere Handbücher für PRIMERGY RX2540 M4

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M9000 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX924 S2 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 580A Technisches Handbuch

Fujitsu

Fujitsu PRIMERGY BX920 S2 Bedienungsanleitung

Fujitsu

Fujitsu BS2000/OSD Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T2000 Service-Handbuch

Fujitsu

Fujitsu 200/200R Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY SX940 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX2520 M4 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX920 S1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu BS2000/OSD Bedienungsanleitung

Fujitsu

Fujitsu SPARC EnterpriseM3000 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX300 S3 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY TX2560 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX300 S7 Bedienungsanleitung

Fujitsu

Fujitsu Primergy N800 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX922 S2 Bedienungsanleitung

Fujitsu

Fujitsu Primergy RX200 S4 Leitfaden

Fujitsu

Fujitsu teamserver M851i Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY CX122 S1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung