Fujitsu PRIMERGY SX940 Bedienungsanleitung
PRIMERGY SX940
Service Supplement
Edition Draft
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
[email protected]ujitsu.com.
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2009 Fujitsu Siemens Computers GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
SX940 Review
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Overview of the documentation . . . . . . . . . . . . . . . . . 5
1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4 Replacement routines . . . . . . . . . . . . . . . . . . . . . 13
4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.1.1 Removing the storage blade . . . . . . . . . . . . . . . . . . . 13
4.1.2 Opening the storage blade . . . . . . . . . . . . . . . . . . . . 14
4.1.3 Closing the storage blade . . . . . . . . . . . . . . . . . . . . 15
4.2 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.2.1 Replacing controller . . . . . . . . . . . . . . . . . . . . . . . 18
4.3 Replacing iBBU . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.4 Replacing SX940 complete (with cabling) . . . . . . . . . . 22
5 Different configurations . . . . . . . . . . . . . . . . . . . . 23
5.1 ControllerLSI 1064 . . . . . . . . . . . . . . . . . . . . . . . 24
5.1.1 Configuration: Two HDDs using one LSI 1064 controller . . . . 24
5.1.2 Configuration: Four HDDs using one LSI 1064 controller . . . . 25
5.1.3 Configuration: Four HDDs using two LSI 1064 controllers . . . 27
5.2 LSI 1078 controllers . . . . . . . . . . . . . . . . . . . . . . 29
5.2.1 Configuration: Two HDDs using one LSI 1078 controller . . . . 29
5.2.2 Configuration: Four HDDs using one LSI 1078 controller . . . . 30
5.2.3 Configuration: Four HDDs using two LSI 1078 controllers . . . 32
5.3 Mixed installation . . . . . . . . . . . . . . . . . . . . . . . . 34
Review SX940
Contents
6 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6.1 Board layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6.1.1 4-port controller (LSI 1064) . . . . . . . . . . . . . . . . . . . . 37
6.1.2 8-port controller (LSI 1078) . . . . . . . . . . . . . . . . . . . . 38
6.1.3 iBBU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
6.1.4 SX940 complete (with cabling) . . . . . . . . . . . . . . . . . . 40
6.2 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6.2.1 SAS cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
6.2.2 Further cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
SX940 Review 5
1 Introduction
The PRIMERGY SX940 Server is a storage subsystem for the PRIMERGY
BX900 S1 and the follow-up models.
1.1 Overview of the documentation
Concept and target groups
This Service Supplement completes the information given in the Operating
Manual.
The activities described in this manual may only be performed by service
personnel.
Service DVD PRIMERGY
Service partners of Fujitsu Technology Solutions can order a Service DVD
PRIMERGY. On the DVD the following manuals are available in pdf format:
– The “Safety notes and other important information” manual
– The Operating Manual for PRIMERGY SX940
– The Supplement PRIMERGY SX940
6ReviewSX940
Overview of the documentation Introduction
Information/procedure Manual
Detailed safety notes Safety notes
Features and technical data of the server Operating Manual
Installation and operation, among other things:
– Installation in the system unit
– Operation
– Commisioning
Installation/removal of all hot-plug components:
– hot-plug hard disk drives
Troubleshooting
Replacement routines:
– Controllerl
–iBBU
– SC940 complete (with cabling)
Service Supplement
Board layouts and cabling
Table 1: Overview of the documentation PRIMERGY SX940
SX940 Review 7
Introduction Notational conventions
1.2 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands, menu items or software programs.
„Quotation marks“ indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.
Table 2: Notational conventions
SX940 Review 9
2Procedure
VCAUTION!
The actions described in these instructions should only be performed by
service personnel.
ÊFirst of all please familiarize yourself with the safety instructions in the
chapter “Safety notes” on page 11.
ÊEnsure that all required manuals (see Service DVD) are available, printing
out the PDF files if necessary. You will definitely need the Operating Manual
for the server, the Options Guide for the server and the Technical Manual for
the system board.
ÊShut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the section “Removing the storage blade”
on page 13.
ÊReplace the faulty component as described in the relevant chapter.
ÊClose the storage blade
ÊPush the storage blade in the slot.1
ÊPut the storage blade into operation.1
1These procedures are described in the Operating Manual.
Inhaltsverzeichnis
Andere Fujitsu Server Handbücher
Fujitsu
Fujitsu PRIMERGY CX2550 M1 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY TX300 Bedienungsanleitung
Fujitsu
Fujitsu FUTRO Z220 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY RX200 S2 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY 10/40GbE Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY RX4770 M2 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY RX100 S8 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY TX2540 M1 Bedienungsanleitung
Fujitsu
Fujitsu PRIMEQUEST 480 Leitfaden
Fujitsu
Fujitsu Primergy TX300 S4 Leitfaden
Fujitsu
Fujitsu primequest 2400E2 Leitfaden
Fujitsu
Fujitsu Primergy RX100 S5 Leitfaden
Fujitsu
Fujitsu FUTRO S930 Bedienungsanleitung
Fujitsu
Fujitsu Primergy RX300 S3 Bedienungsanleitung
Fujitsu
Fujitsu Supercomputer PRIMEHPC FX700 Montageanleitung
Fujitsu
Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung
Fujitsu
Fujitsu SPARC M10-4 Bedienungsanleitung
Fujitsu
Fujitsu PRIMERGY BX620 S4 Bedienungsanleitung
Fujitsu
Fujitsu SPARC Enterprise M8000 Service-Handbuch
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung