Fujitsu Primergy N800 Bedienungsanleitung

PRIMER

PRIMERGY N800

Server System

Xenia Fierley

Fujitsu Siemens Computers GmbH Primergy

81730 München

e-mail: email:manuals@fujitsu-siemens.com

Tel.: (089) 61001-157

Fax: 0 700 / 372 00000

U41244-J-Z156-1-76

Sprachen: En

Edition July 2001

This manual is printed on

paper treated with

chlorine-free bleach.

Comments…Suggestions…Corrections…

The User Documentation Department would like to know

your opinion on this manual. Your feedback helps us to

optimize our documentation to suit your individual needs.

Faxformsforsending usyourcommentsareincludedatthe

back of the manual.

There you will also find the addresses of the relevant User

Documentation Department

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

This manual was produced by

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Introduction

Important notes

Installing the server

Preparation for use and operation

Configuration software and utilities

Property and data protection

Troubleshooting and tips

System expansions

SCSI configurations

Reference section and index

U41243-J-Z156-1-76

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.2 Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.3 Summary of contents . . . . . . . . . . . . . . . . . . . . . . . 6

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . . . 7

1.5 User-friendly documentation – verified quality . . . . . . . . . . . 8

1.6 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.1 Notes on safety . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2 Electrostatic-sensitive component label . . . . . . . . . . . . . 13

2.3 CE certificate . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.4 RFI suppression . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.5 FCC notices (Federal Communications Commission) . . . . . . 14

2.6 Notes on mounting in the rack . . . . . . . . . . . . . . . . . . 15

2.7 Notes on transportation . . . . . . . . . . . . . . . . . . . . . 15

2.8 Environmental protection . . . . . . . . . . . . . . . . . . . . 16

3 Installing the server . . . . . . . . . . . . . . . . . . . . . . 19

3.1 Unpacking the server . . . . . . . . . . . . . . . . . . . . . . 19

3.2 Mounting the server in the rack . . . . . . . . . . . . . . . . . 20

3.3 Connecting and disconnecting cables . . . . . . . . . . . . . . 25

3.4 Routing cables . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.5 Connecting devices to the server . . . . . . . . . . . . . . . . 28

3.5.1 Universal ports . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3.5.2 CAN bus connection . . . . . . . . . . . . . . . . . . . . . . . 29

3.6 Connecting the server to line voltage . . . . . . . . . . . . . . 31

4 Preparation for use and operation . . . . . . . . . . . . . . 33

4.1 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 33

4.1.1 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . 33

4.1.2 Indicators for the internal SCSI drives . . . . . . . . . . . . . . 35

4.1.3 Controls and indicators for the CD-ROM drive . . . . . . . . . 35

4.1.4 Controls and indicators for the floppy disk drive . . . . . . . . . 35

4.1.5 Indicators for the power supplies . . . . . . . . . . . . . . . . 35

4.1.6 Indicators for the hot-plug PCI slots . . . . . . . . . . . . . . . 35

4.1.7 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4.2 Switching the server on and off . . . . . . . . . . . . . . . . . 37

4.3 Installing the operating system . . . . . . . . . . . . . . . . . 38

U41243-J-Z156-1-76

Contents

4.4 Configuring the server and components . . . . . . . . . . . . . 38

4.4.1 Changing the switch settings . . . . . . . . . . . . . . . . . . . 39

4.5 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . . 43

5 Configuration software and utilities . . . . . . . . . . . . . . 45

5.1 Short cuts using a key combinations . . . . . . . . . . . . . . . 45

5.2 Power-ON Self-Test (POST) . . . . . . . . . . . . . . . . . . . 45

5.3 BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

5.3.1 Starting BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . 48

5.3.2 Setup menus . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

5.3.3 Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5.3.3.1 Primary Master and/or Primary Slave submenu . . . . . . . . . 52

5.3.3.2 Processor Information submenu . . . . . . . . . . . . . . . . . 53

5.3.3.3 Keyboard Features submenu . . . . . . . . . . . . . . . . . . . 54

5.3.4 Advanced Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 55

5.3.4.1 PCI Configuration submenu . . . . . . . . . . . . . . . . . . . 56

5.3.4.2 PCI Mode submenu . . . . . . . . . . . . . . . . . . . . . . . . 56

5.3.4.3 I/O Device Configuration submenu . . . . . . . . . . . . . . . . 57

5.3.4.4 Advanced Chipset Control submenu . . . . . . . . . . . . . . . 59

5.3.5 Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

5.3.6 Server Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

5.3.6.1 System Management submenu . . . . . . . . . . . . . . . . . . 63

5.3.6.2 Server Management Information submenu . . . . . . . . . . . . 64

5.3.6.3 Console Redirection submenu . . . . . . . . . . . . . . . . . . 64

5.3.7 Boot Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

5.3.8 Exit Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

5.4 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

5.4.1 System Setup Utility (SSU) . . . . . . . . . . . . . . . . . . . . 67

5.4.2 BIOS update . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

5.4.2.1 Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

5.4.2.2 BIOS and firmware update . . . . . . . . . . . . . . . . . . . . 69

5.4.2.3 Recovering BIOS . . . . . . . . . . . . . . . . . . . . . . . . . 70

5.4.2.4 Changing the BIOS language . . . . . . . . . . . . . . . . . . . 70

5.4.3 Installing graphic drivers . . . . . . . . . . . . . . . . . . . . . 71

5.4.4 Symbios SCSI utility . . . . . . . . . . . . . . . . . . . . . . . 71

5.4.5 Installing PCI hot-plug software . . . . . . . . . . . . . . . . . . 71

6 Property and data protection . . . . . . . . . . . . . . . . . . 73

7 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 75

7.1 Power-on indicator remains dark . . . . . . . . . . . . . . . . . 75

7.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . . 76

7.3 Screen remains dark . . . . . . . . . . . . . . . . . . . . . . . 76

7.4 Flickering stripes on the monitor screen . . . . . . . . . . . . . 77

U41243-J-Z156-1-76

Contents

7.5 No screen display or display drifts . . . . . . . . . . . . . . . . 77

7.6 No mouse pointer displayed on the screen . . . . . . . . . . . 77

7.7 Floppy disk cannot be read/written . . . . . . . . . . . . . . . 78

7.8 Time and date are not correct . . . . . . . . . . . . . . . . . . 78

7.9 System will not boot . . . . . . . . . . . . . . . . . . . . . . . 78

7.10 Drives are reported as “dead” . . . . . . . . . . . . . . . . . . 79

7.11 Added drive reported defective . . . . . . . . . . . . . . . . . 79

7.12 Error messages on the screen . . . . . . . . . . . . . . . . . . 79

7.13 Error messages on the LCD display . . . . . . . . . . . . . . . 80

8 System expansions . . . . . . . . . . . . . . . . . . . . . . 85

8.1 Opening/closing the server . . . . . . . . . . . . . . . . . . . 85

8.1.1 Removing the front bezel . . . . . . . . . . . . . . . . . . . . 85

8.1.2 Mounting the front bezel . . . . . . . . . . . . . . . . . . . . . 86

8.1.3 Removing/mounting the PCI bus hot-plug cover . . . . . . . . 87

8.1.4 Removing/mounting the top cover . . . . . . . . . . . . . . . . 88

8.2 SCSI hard disk drives . . . . . . . . . . . . . . . . . . . . . . 89

8.2.1 Replacing SCSI hard disk drives . . . . . . . . . . . . . . . . 91

8.3 Power supply units . . . . . . . . . . . . . . . . . . . . . . . . 94

8.3.1 Replacing a power supply unit . . . . . . . . . . . . . . . . . . 95

8.4 Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

8.4.1 Replacing a fan . . . . . . . . . . . . . . . . . . . . . . . . . 97

8.5 Boards in hot-plug PCI slot . . . . . . . . . . . . . . . . . . . 99

8.5.1 Replacing boards in the hot-plug PCI slot . . . . . . . . . . . . 101

8.5.2 Adding a PCI board . . . . . . . . . . . . . . . . . . . . . . . 104

8.6 Processor expansion . . . . . . . . . . . . . . . . . . . . . . 105

8.6.1 Removing/installing processor units . . . . . . . . . . . . . . . 107

8.7 Memory expansion . . . . . . . . . . . . . . . . . . . . . . . 108

8.7.1 Installing DIMMs . . . . . . . . . . . . . . . . . . . . . . . . . 110

8.7.2 Removing a memory module . . . . . . . . . . . . . . . . . . 112

8.7.3 Installing a memory module . . . . . . . . . . . . . . . . . . . 114

8.8 RemoteView storage medium . . . . . . . . . . . . . . . . . . 114

8.8.1 Configuring the RemoteView storage medium . . . . . . . . . 115

8.9 Remote Service Board . . . . . . . . . . . . . . . . . . . . . . 116

9 SCSI configurations . . . . . . . . . . . . . . . . . . . . . . 117

9.1 Addresses for SCSI devices . . . . . . . . . . . . . . . . . . . 117

9.2 Internal SCSI configurations . . . . . . . . . . . . . . . . . . . 118

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

U41243-J-Z156-1-76 1

1 Introduction

The PRIMERGY N800 system server is an enterprise server with 8-way

processing power and offers highest performance by using the Intel profusion

technology. It is easy to integrate and can easily satisfy the needs of a variety

ofhigh-performanceapplicationssuchas,forexample,useasa networkserver,

multiuser server system or large database.

PRIMERGY N800 server systems offer a high level of data security and avail-

ability through highly developed hardware and software components. These

include hot-swap-capable hard disk slide-in modules, hot-plug fans, hot-plug

power supply units, server management ServerView, Prefailure Detection and

Analyzing (PDA), and Automatic Server Reconfiguration and Restart (ASR&R).

Security functions in BIOS-Setup and on the system board protect the data on

the server against manipulation. The lockable door of the rack offers additional

security.

As your application requirements grow, you can upgrade your server with the

following components:

●More powerful (700 MHz and higher) with new carrier (mezzanine) boards

and/or additional processors

●An additional CPU board with cache coherency (CC) filters

●An additional memory board and additional memory

●Other peripheral devices

●Add-on PCI boards

The PRIMERGY N800 is supplied as a 19-inch rack-mounted model (compute

node housing) and occupies seven height units (7 HU) in the rack.

2 U41243-J-Z156-1-76

Features Introduction

1.1 Features

Processors and Memory

The server can accommodate up to eight Intel Pentium III Xeon™processors

with a clock frequency of 700 MHz or 900 MHz. 1 MB and 2 MB second level

cache are available.

The 700 MHz or 900 MHz processors are mounted on „Palmetto mezzanine“

carrier boards.

VCAUTION!

In order to prevent a damage of the processors, pay attention that the

processors are mounted on the corresponding carrier boards only.

Up to 32 GB Ram memory with ECC SDRAM technology are available.

Hard disk system

The hard disk system consists of four hard disk slide-in modules. Each module

can accommodate a SCSI hard disk drive with a SCA (Single Connector

Attachment) interface and a maximum height of 1 inch. The hard diskdrives are

accessible from the front of the system and connect to two LVDS/SCSI

backplanes.The connectionto the SCSIbackplane isimplementedvia the SCA

interface (no cable required) and allows the hard disk slide-in modules to be

attached or detached easily (hot-plug). As part of the hot-plug implementation,

a hard disk slide-in module with integrated heat dissipation is required. The

drives are fastened to the slide-in module, which snaps into the chassis with a

locking mechanism.

Externally accessible drives

A 3.5-inch floppy disk drive and an IDE-CD-ROM or DVD drive with 0,5-inch

height are available. Additionally a 5,25-inch SCSI tape drive for backup can

also be used.

The externally accessible drives are accessed from the front of the system.

The floppy disk drive, CD-ROM respectively DVD drive and backup drive are

mounted in a common cage. The accessible drives can not be replaced during

operation.

Inhaltsverzeichnis

Andere Fujitsu Server Handbücher

Fujitsu

Fujitsu PRIMERGY RX300 S5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX1330 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX620 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 480 Technisches Handbuch

Fujitsu

Fujitsu PRIMERGY RX2450 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Service-Handbuch

Fujitsu

Fujitsu PRIMERGY RX300 S5 Betriebsanleitung

Fujitsu

Fujitsu PRIMERGY RX200 S3 Leitfaden

Fujitsu

Fujitsu PRIMERGY RX600 S6 Bedienungsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Montageanleitung

Fujitsu

Fujitsu PRIMERGY RX2540 M6 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M3000 Installationsanleitung

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Bedienungsanleitung

Fujitsu

Fujitsu CELVIN NAS QE807 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY RX300 S8 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX2540 M1 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 S1 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Installationsanleitung

Fujitsu

Fujitsu Primergy RX100 S3 Betriebsanleitung

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY TX200 S5 Bedienungsanleitung

Fujitsu

Fujitsu SPARC Enterprise M4000 Service-Handbuch

Fujitsu

Fujitsu Primergy TX120 Leitfaden

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung